What is the full name of IPU in electric vehicles?

How to Turn Off the Auto Start-Stop Function on Chevrolet Malibu XL?

The method to turn off the auto start-stop function on Malibu XL: Simply press the auto start-stop button, and the dashboard will display a prompt indicating the system is being turned off. Click to confirm the shutdown. Scenarios where turning off the auto start-stop is recommended: 1. When driving on steep slopes, it is advisable to avoid using the auto start-stop function. Although the engine stop duration is brief, the start-stop operation on a slope may lead to insufficient braking assistance. 2. During extremely hot weather in southern regions when the air conditioning is running at full capacity, it is best to disable the auto start-stop function. The air conditioning system requires significant power, and the vehicle's electrical system may not provide enough power to sustain the air conditioning when the engine is off, resulting in discomfort for passengers. 3. When driving through water, it is highly recommended to turn off the auto start-stop system. This prevents the engine from shutting down while the vehicle is in motion, which could cause a sudden drop in exhaust pressure. Water may then flow back into the engine through the exhaust pipe, potentially preventing the engine from restarting. 4. In cases of severe traffic congestion, disabling the auto start-stop function is also suggested. Prolonged engine shutdowns can lower the combustion chamber temperature, leading to the formation of carbon deposits from unburned hydrocarbons and paraffin on the cylinder walls. These deposits can increase fuel consumption and reduce engine power, counteracting the fuel-saving purpose of the auto start-stop feature.

11

3

Share

What are the reasons for the absence of input from the uneven road surface sensing system?

The reasons for the absence of input from the uneven road surface sensing system include faults in the vehicle's tilt sensor and poor line contact. The specific causes and solutions are as follows: Tilt sensor failure: Tilt sensor failure is the primary link in achieving automatic detection and control. If it malfunctions, the phenomenon of the sensing system input being absent will occur. The solution is to repair the tilt sensor. Poor line contact: Check whether the sensor plug is properly connected. Short circuits or poor contact in the lines can also cause the absence of input from the uneven road surface sensing system. The solution is to inspect the lines and carry out repairs.

4

1

Share

What happens if the VVT solenoid valve fails?

When the VVT valve is damaged, common symptoms include sluggish acceleration, fault codes being triggered, increased fuel consumption, and severe difficulty in starting the engine. VVT system malfunction: If there is an issue with the VVT system, it may cause a delay in valve timing, resulting in weak acceleration or hesitation. In general, this leads to starting difficulties and unstable idle speed. It is recommended to promptly inspect and repair the system when these symptoms occur. Function of VVT: The VVT system continuously adjusts the engine's valve opening and closing timing as well as the air intake volume. This enhances engine power, optimizes the torque curve, and provides the significant benefits of improving engine performance while reducing fuel consumption.

18

1

Share

Which generation is the Aisin TF71SC transmission?

Aisin TF71SC is a third-generation transmission. Function of transmission: The transmission is used to change the speed and torque from the engine, and can fix or separately change the transmission ratio of the output shaft and input shaft as an automotive component. Composition of transmission: The transmission consists of a gear transmission mechanism and a control mechanism, and can be classified into stepped, continuously variable, and integrated transmissions. Functions of transmission: With the engine speed and torque unchanged, the transmission can change the driving force and speed of the vehicle; enable the vehicle to reverse; and allow the engine to stop without stalling.

16

2

Share

The Difference Between Electric Trunk and Sensor-Activated Trunk?

The difference between a sensor-activated trunk and an electric trunk lies in the way they are opened: A sensor-activated trunk is an additional feature built upon an electric trunk. Typically, a sensor switch is installed at the lower part of the vehicle's trunk. When the owner sweeps their foot past it, the trunk automatically pops open. This design eliminates the need for manual trunk opening, which is especially convenient when carrying heavy items, making it a very smart feature. An electric trunk is equipped with two axial drive rods inside, controlled by an electrical circuit. The owner can press a button inside the car or on the car key to open the trunk automatically. The trunk serves as a storage compartment for miscellaneous items in a car, enhancing life's convenience. Most vehicle models have the trunk at the rear, while some sports cars have it at the front. The opening mechanisms are largely similar. Inside the trunk, you can typically find emergency items such as a spare tire, a vehicle first aid kit, a toolkit, a warning triangle, a fire extinguisher, and an emergency fuel cap release cable. Methods for maintaining a car trunk: When cleaning, use a brush to remove dirt, including the edges and grooves of the trunk. After cleaning, treat any odors. Use separate bags to organize items systematically. Place a trunk mat to prevent dirt or liquids from entering and damaging the trunk's surface. It also helps keep items from sliding around, reducing the risk of contamination or damage.

15

5

Share

How often should the Kia K3 be serviced?

Spark plugs should be replaced every 20,000KM. Components such as brake fluid and transmission oil are inspection items. The Kia K3 should be serviced every 5,000 kilometers. Below is a detailed introduction to the vehicle maintenance items: Engine Oil and Oil Filter Replacement: This primarily involves maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the oil, ensuring the normal operation of the lubrication system. The oil filter should be replaced along with the oil during an oil change. Under normal circumstances, the car should be serviced every 5,000KM. Filter Element Replacement: The air filter element functions to filter air before it enters the cylinder, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter element depend on the usage environment. The gasoline filter element is generally replaced after driving 20,000-25,000KM. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000KM. Additionally, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during routine maintenance, with maintenance performed as needed based on usage conditions.

12

4

Share

What is the full name of IPU in electric vehicles?

How to Turn Off the Auto Start-Stop Function on Chevrolet Malibu XL?

What are the reasons for the absence of input from the uneven road surface sensing system?

What happens if the VVT solenoid valve fails?

Which generation is the Aisin TF71SC transmission?

The Difference Between Electric Trunk and Sensor-Activated Trunk?

How often should the Kia K3 be serviced?

How to Disassemble the Brake Disc of Nissan Teana?

How to Drive a Volkswagen with Tiptronic Transmission?

What is the purpose of adjusting valve clearance in a car engine?

How to open the trunk from inside the Tayron?