What is the full name of BYD?

What kind of oil should be added to a BorgWarner transfer case?

BorgWarner transfer cases require gear oil. Gear oil: Gear oil primarily refers to the lubricating oil used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil mainly functions to lubricate gears and bearings, prevent wear and corrosion, and assist in heat dissipation for gears. Applications of gear oil: Automotive gear oil is used in gear transmission mechanisms such as steering gearboxes, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion and rust prevention, cleaning, and reducing gear surface impact and noise.

10

1

Share

What are the causes of unstable motorcycle idle speed?

Unstable idle speed can be caused by the following reasons: 1. Inaccurate ignition timing, leading to poor idle performance; 2. Air leakage in the engine; 3. Incorrect spark plug electrode gap; 4. Clogged idle jet in the carburetor; 5. Incorrect gasoline octane rating (too low octane number); 6. Blocked air filter or muffler; 7. Poor quality gasoline. Motorcycle idle speed (commonly known as "small fire") refers to the operating condition when the engine is running without load while the motorcycle is stationary. The idle speed directly affects the motorcycle's fuel pump quantity, and excessively high idle speed will also affect the motorcycle's fuel consumption.

4

3

Share

What is the function of an automobile evaporator?

The function of an automobile evaporator is to transform the refrigerant from a liquid state into a gaseous state, absorbing a significant amount of heat from the surroundings in the process. The resulting low-temperature, low-pressure refrigerant vapor then re-enters the compressor. This cyclic process achieves the goal of cooling, providing a comfortable environment for passengers during summer, reducing driver fatigue, and enhancing driving safety. The automobile evaporator serves as the radiator device for both the car engine and the air conditioning system. Inside the automobile evaporator, there are two key components: a heater core and an evaporator coil. When the water in the car's radiator heats up, it flows into the heater core, and the air blown by the fan becomes warm. When the air conditioning is turned on, the heater core stops receiving water, and the air conditioning system starts operating. The compressor then forces the refrigerant into the evaporator coil, producing cold air.

15

4

Share

How to Use the Start-Stop System?

Automatic start-stop system usage steps: 1. When the engine stops due to start-stop function, quickly shift to P gear - you can release the brake pedal without restarting the engine. If stopped in D gear, applying the handbrake and releasing the brake won't maintain engine shutdown. For quicker acceleration readiness, shifting to N gear will restart the engine; 2. Reduce usage of high-current electrical equipment; 3. During prolonged braking when stopped, insufficient brake vacuum will trigger engine restart; 4. Wait for complete engine shutdown before restarting. The engine automatic start-stop system automatically shuts off the engine during temporary stops while driving and restarts it when needed to continue moving.

18

0

Share

What does the tire size 215/55r16 mean?

Tire size 215/55r16 indicates that the tire width is 215 millimeters, the aspect ratio is 55%, the tire structure is radial, and the applicable rim diameter is 16 inches. Below is relevant knowledge about tires: Functions of tires: Support the vehicle load, balancing the average pressure on the tire's contact area with the internal inflation pressure. Reduce and absorb vibrations and impacts during driving, preventing early damage to automotive components caused by severe vibrations. Representation methods of tire specifications: There are essentially two systems for representing tire specifications: metric and imperial. Most countries, including China, use the imperial representation method.

19

2

Share

Does Rainy Weather Affect Car Waxing?

Rainy weather does affect car waxing, as the car should not be exposed to rain until 30 to 60 minutes after waxing. Here are the relevant details: 1. It is advisable to avoid waxing on overcast, rainy, or foggy days; choose sunny weather instead. The purpose of car waxing is to protect the paint from rain and external dust corrosion. If the car is exposed to rain immediately after waxing, the waterproofing effect of the wax will certainly be compromised. 2. Car waxing is a traditional automotive care procedure that effectively prevents dust accumulation, acting as a protective layer for the car. It also helps delay paint aging, extends the lifespan of the paint, and shields against UV radiation, significantly reducing UV damage to the car's paint.

17

3

Share

What is the full name of BYD?

What kind of oil should be added to a BorgWarner transfer case?

What are the causes of unstable motorcycle idle speed?

What is the function of an automobile evaporator?

How to Use the Start-Stop System?

What does the tire size 215/55r16 mean?

Does Rainy Weather Affect Car Waxing?

How to Turn Off the ECO Display in a Mercedes-Benz?

What is the turbo pressure?

Why does a small wrench appear on the car?

What Are the Reasons for Increased Engine Noise in Cars?