What is the full name and meaning of BMW?

How Many Kilometers Should a Teana's Brake Pads Be Replaced?

Teana's brake pads generally need to be replaced every 40,000 kilometers. The Teana uses brake pads produced by Hitachi. As an important wear component of the braking system, the friction linings and friction blocks of the brake pads bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. Below is relevant information about brake pads: 1. The friction blocks of brake pads are composed of friction materials and adhesives. When braking, they are pressed against the brake disc or drum to generate friction, achieving the goal of vehicle deceleration and stopping. Due to friction, the friction blocks gradually wear out. Generally, the lower the cost of the brake pads, the faster they wear out. Once the friction materials are used up, the brake pads should be replaced promptly; otherwise, the steel plate will come into direct contact with the brake disc, resulting in loss of braking effect and damage to the brake disc. 2. Braking relies on the friction between the brake pads and the brake disc, as well as between the tires and the ground, converting the kinetic energy of the moving vehicle into heat energy through friction to stop the car. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver to the brake pedal is fully and effectively transmitted to the master cylinder and slave cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat.

17

4

Share

How many kilometers can the Tesla Model 3 Long Range actually drive?

The Long Range version can easily cover 550 kilometers. The Tesla Model 3 is a mid-sized all-electric vehicle from Tesla, with a wheelbase of 2875 mm and dimensions of 4694 mm in length, 1850 mm in width, and 1443 mm in height. The Tesla Model 3 comes in three configurations: Standard Range Rear-Wheel Drive, Long Range Rear-Wheel Drive, and Performance All-Wheel Drive. More detailed information about the Tesla Model 3 is as follows: 1. The Rear-Wheel Drive version is a single-motor model, with the motor positioned at the rear. The motor in the Rear-Wheel Drive version has a maximum power of 202 kW and a maximum torque of 404 Nm. 2. The All-Wheel Drive version is a dual-motor model, with motors on both the front and rear axles. The total motor power for the All-Wheel Drive version is 340 kW, with a total torque of 639 Nm. 3. All Tesla Model 3 variants use ternary lithium batteries, which offer higher energy density and lighter weight. The front suspension of the Tesla Model 3 uses a double-wishbone independent suspension, while the rear suspension employs a multi-link independent suspension. 4. The double-wishbone suspension is a complex independent suspension system, consisting of upper and lower wishbones connected by a link. The multi-link suspension is an improved version of the double-wishbone suspension, where the two wishbones are replaced with individual links. The multi-link suspension enhances the tire's contact with the road.

2

Share

What are the methods to identify counterfeit Yamaha Cuxi?

Methods to identify counterfeit Yamaha Cuxi are as follows: 1. Engine: Genuine Yamaha Cuxi first and second generation 100 models have 'YAMAHA' letters on the left engine side cover, and the air filter also has 'YAMAHA' letters. Below the right side panel in the kick-start lever direction, there is a manufacturing nameplate from Zhuzhou Yamaha Company. Next to the nameplate, there is an aluminum part with 'E-K-K' letters, and the exhaust pipe heat shield plastic part is printed with 'YAMAHA' letters. Some high-quality counterfeit models may use genuine Yamaha engines. 2. Instrument panel: The genuine instrument panel has a circular trident Yamaha logo. Even after ten years of use, the plastic shell color will not turn yellow, whereas counterfeit Yamaha Cuxi plastic shells will turn yellow after prolonged use. 3. Front panel: The genuine Cuxi front panel plastic part has a trident Yamaha logo on the front and 'YAMAHA' letters on the back. After removing the front panel, visible parts, except for the ignition lock which has 'YAMAHA' letters, all other visible components have numbers starting with 'G-Y-6'. Additionally, both left and right side panels have 'YAMAHA' letters, and above the right side panel nameplate, there is a rectangular English logo of Yamaha Company.

2

3

Share

What is the throttle body cleaning procedure?

1. First, disconnect the wiring harness connector next to the throttle body, use a hex screwdriver to remove the mounting screws, and then take off the throttle body. 2. Cover the intake port to prevent debris from entering the engine. 3. Spray cleaning agent onto the dirt. Be careful not to spray the cleaning agent outside the throttle body, do not forcefully pry the internal throttle plate, and avoid damaging the adjacent throttle motor. 4. Finally, let it air dry naturally. It is best not to wipe it with a cloth, as this may remove the surface lubricating coating. 5. After reinstalling the throttle body, perform a power reset or throttle body relearn procedure.

15

5

Share

What is the fuel tank capacity of the Peugeot 4008?

The 2022 Peugeot 4008 has a fuel tank capacity of 53 liters. The 2022 Peugeot 4008 is equipped with a 1.8-liter turbocharged engine, paired with an automatic transmission (AT), and features a front-wheel-drive system across all models. In comparison with similar models, the 2021 Skoda Kodiaq TSI330 5-seater two-wheel-drive standard version has a fuel tank capacity of 60 liters, while the 2021 Mazda CX-4 2.0L automatic two-wheel-drive Skyactiv Youth Edition has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, and when it is near 'F', it means the fuel level is sufficient.

17

1

Share

Is It Normal for a Car Blower Resistor to Get Hot?

It is normal for a car blower resistor to get hot. The function of the car blower is to blow the cold air from the air conditioning evaporator or the hot air from the heater core into the car. When the blower is turned on, if the lowest temperature is selected, the outside air drawn in through the external circulation will be at the ambient temperature, which might be slightly higher because the air intake for the external circulation is usually located between the windshield and the engine compartment, increasing the temperature of the incoming air. Below are the functions of a car air conditioning system: 1. Temperature Regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the temperature inside the car. In winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize waste heat from the engine for heating. 2. Humidity Regulation: Humidity greatly affects passenger comfort. The humidity inside the car should generally be maintained between 30% and 70%. Standard car air conditioning systems do not have the capability to regulate humidity; this can only be achieved through ventilation or by using advanced luxury car systems that integrate heating and cooling. 3. Airflow Regulation: The speed and direction of airflow significantly impact comfort. If air is blown directly, the speed should be limited to a certain range when the temperature is appropriate. The speed can be adjusted based on passengers' living environment, age, health, and personal preferences. 4. Air Purification: The quality of air inside the car is crucial for comfort.

11

1

Share

What is the full name and meaning of BMW?

How Many Kilometers Should a Teana's Brake Pads Be Replaced?

How many kilometers can the Tesla Model 3 Long Range actually drive?

What are the methods to identify counterfeit Yamaha Cuxi?

What is the throttle body cleaning procedure?

What is the fuel tank capacity of the Peugeot 4008?

Is It Normal for a Car Blower Resistor to Get Hot?

What is the fuel consumption of the Magotan 1.8T?

What are the body dimensions of the Roewe RX3?

What is the fuel tank capacity of the Peugeot 2008 in liters?

How many kilowatt-hours of electricity does it take to fully charge a BYD Qin?