What is the fuel tank capacity of the Zhida X3?

1 Answers
Thaddeus
07/30/25 6:23am
The fuel tank capacity of the BAIC Zhida X3 is 46 liters, as officially announced. The BAIC Zhida X3 uses 92-octane fuel, with a fuel consumption of 6.9-7.2L per 100 kilometers. A full tank can cover a distance of 638-666 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge in the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe level, and there is additional space from the safe level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
9
0
Share
More Forum Discussions

What are the reasons for the loud noise from the Haval H6 power steering pump?

Haval H6 power steering pump noise may be caused by the following reasons: 1. Oil leakage from the power steering pump, resulting in low oil level, which causes noise when turning the steering wheel; 2. Poor lubrication of the power steering pump when cold, leading to internal wear and noise; 3. Loose installation of the power steering pump, causing noise during operation. Extended content: Power steering pumps are mainly divided into steering power pumps and brake power pumps. Among them, the steering power pump serves as the power source for vehicle steering and is the "heart" of the steering system. The brake power pump is a large-diameter vacuum chamber with a diaphragm (or piston) in the middle equipped with a push rod, dividing the chamber into two parts: one part is connected to the atmosphere, and the other part is connected to the engine intake pipe through a pipeline.
14
0
Share

Does the Audi A6 have anti-pinch windows?

The Audi A6 is equipped with an anti-pinch window function, which generally requires contact with a certain amount of force to activate. Here is some related knowledge about the Audi A6: Exterior: The Audi A6 features a more balanced exterior proportion, with a long engine hood, long wheelbase, and short front and rear overhangs, creating a better sense of luxury and sportiness for an executive-level vehicle. Interior: The leather seats are neatly stitched, offering great aesthetics. Advanced aerodynamics applied: The minimum drag coefficient is 0.24, and thanks to advanced aeroacoustic technology, the sedan remains comfortable and quiet even at high speeds.
11
1
Share

What is the difference between original factory and original packaging?

The difference between original factory and original packaging is: Packaging: Original factory refers to products manufactured by the original manufacturer (i.e., the designated production facility for that product). Original packaging doesn't necessarily mean original factory products; it simply indicates the product hasn't been opened or used since leaving the factory. Definition: When a part fails in an original factory product, original factory replacement parts are the best substitutes, excluding scenarios where better components are used in major product overhauls. Concept: Original factory parts are components manufactured by the same company that produced the main equipment. These parts undergo factory testing, but may not necessarily function optimally within the complete system.
5
0
Share

Where is the handbrake of the Buick business car?

The handbrake of the Buick business car is located at the far left under the foot. When parking is needed, step on it firmly to the bottom, which gives the same feeling as pulling up the handbrake normally. Just step on it again to release the parking and get back on the road. If the power gear is engaged without releasing the parking, there will be a voice reminder. The specific use of the handbrake is as follows: 1. Remember to pull the handbrake when parking and turning off the engine. If the handbrake is not pulled after parking, the car may move by itself, leading to accidents. Especially on slopes, it is necessary to engage the gear and pull the handbrake, waiting for the vehicle to stabilize before getting off. 2. The handbrake is often used in conjunction with the neutral gear. When waiting briefly at a red light, pulling the handbrake in neutral not only prevents the car from rolling on uneven roads but also allows the right foot to release the brake. 3. Do not pull the handbrake too tight. Nowadays, many cars have spring-operated handbrakes with gears. The higher the handbrake is pulled, the tighter the spring becomes. Therefore, when pulling, it is advisable to stop when the car does not shake, and try not to pull it to the extreme, which helps prolong the life of the handbrake. 4. When starting, make sure to push the handbrake down, and pay attention to pressing the button to ensure it reaches the very bottom. Forgetting to release the handbrake can cause damage to it.
1
5
Share

What to Do If the Buick Car Key is Left in the Trunk?

If the car door is open, you can use the trunk switch on the door to open it. If the car door is locked, you can contact a 4S store to unlock it. There is a trunk unlock button on the driver's side door. If the car door is not locked, simply use this switch to open the trunk. Here is some information about Buick: Introduction: Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. It is sold in North America, China, CIS countries, and the Middle East. Meaning: The pattern resembling "three shields" in the Buick (BUICK) logo serves as its graphic trademark and is the emblem of the Buick division.
9
5
Share

How to Care for Automotive Leather?

First, apply a layer of polish to genuine leather seats. This not only enhances the shine but also adds a protective coating to the seats. This method is relatively simple and can be done by car owners at home (manual scrubbing): For semi-aniline leather jackets, use quick brushing and wiping (mix half a bowl of water with 8 drops of LV cleaner for color protection, then add 20 drops of high-end leather surface cleaner). When cleaning full-aniline leather jackets, start by dampening with water, then brush and wipe simultaneously. The cleaning process for the inner lining of the jacket is the same as for glossy leather jackets.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.