What is the fuel tank capacity of the Yaris L?

1 Answers
BrodyLee
07/29/25 5:31pm
The 2022 Yaris L comes in 5 variants, all with a fuel tank capacity of 42 liters. The vehicle is equipped with a 1.5L naturally aspirated engine and an 8-speed continuously variable transmission. All models feature front-engine, front-wheel-drive configuration. Among its competitors, the 2022 Vios has a 42L fuel tank, the 2021 Fit has a 40L tank, and the 2022 Polo has a 42.5L tank. To check remaining fuel, observe the fuel gauge on the right side of the instrument cluster marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel level, while near F means sufficient fuel. Fuel tank maintenance guidelines: 1. Drain accumulated water and sediment from the tank, and inspect fuel line connections and valves for leaks. 2. For tanks with air and vapor valves, check that ventilation holes are unobstructed. 3. Maintain the fuel filler inlet screen to prevent contaminants from entering and clogging the fuel system. 4. Ensure the filler cap's sealing gasket is intact to prevent fuel spillage during driving.
Was this review help?
4
5
Share
More Forum Discussions

How to Lift Wiper Blades in Snowy Weather?

Steps to lift wiper blades in snowy weather: 1. Turn off the car engine; 2. Activate the windshield washer switch within 10 seconds; 3. After pressing the wiper switch, the wiper blades will automatically move to the center position of the windshield; 4. Simply lift the wiper blades upright. Wiper blades are blade-like structures installed in front of the windshield, composed of components such as an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The main function of wiper blades is to clear rain, snow, and dust from the windshield that obstruct the driver's view, thereby improving visibility and enhancing driving safety. It is recommended to replace wiper blades every one to two years.
15
4
Share

What are the joint ventures of Honda in China?

Honda has joint ventures with GAC and Dongfeng. GAC Honda's models include the Fit and Breeze, while Dongfeng Honda's models include the Civic and Spirior. The Breeze is a new SUV model launched by GAC Honda. The front grille of the Honda Breeze is decorated with a large number of chrome trim strips and connected to the headlight groups on both sides, with a three-section air intake design below. On the side of the body, the car features a design that highlights the front and rear wheel arches and tightens the doors, paired with black trim strips below the body to add a touch of elegance. At the rear, it adopts a flat L-shaped taillight design, with a dual-exhaust layout on both sides.
10
1
Share

Which Brand Does Everus Belong To?

Everus is a brand under GAC Honda. In terms of configuration, the Honda Fit under the Everus brand is equipped with a VSA Vehicle Stability Control System, ESS Emergency Stop Signal System, and a three-mode rearview camera display system. In terms of dimensions, the Honda Fit measures 4109mm in length, 1694mm in width, and 1537mm in height, with a wheelbase of 2530mm, front track of 1485mm, and rear track of 1473mm. The Honda Fit is powered by a 1.5L naturally aspirated engine paired with a CVT transmission, delivering a maximum horsepower of 131Ps, maximum power of 96kW, and maximum torque of 155Nm.
1
1
Share

What to Do if the Car Gets Scratched?

Solutions for car scratches: 1. For minor scratches that only affect the clear coat of the paint, you can use fine polishing wax to repair the scratches; 2. For moderate scratches where the color coat is visibly affected, it is recommended to take the car to a professional auto repair shop for treatment. Ways to prevent car scratches: 1. When parking, avoid high-traffic areas, whether during the day or night, and ensure you do not obstruct other vehicles or pedestrians; 2. Always consider the spacing between parked cars; 3. Whenever possible, choose official parking lots that are under supervision.
6
2
Share

Is the Touran produced by SAIC or FAW?

The Touran is produced by SAIC. SAIC Volkswagen and FAW-Volkswagen are two independent companies, and the models they produce are completely different. SAIC Volkswagen produces models such as the Santana, Lamando, Passat, Phideon, and Touran L; while FAW-Volkswagen produces models like the Golf, Polo, Bora, Lavida, and Sagitar Lamando. Taking the Volkswagen Touran as an example, its body dimensions are 4527mm in length, 1829mm in width, and 1659mm in height, with a wheelbase of 2791mm. It is equipped with a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 110kW and a maximum torque of 250Nm.
5
2
Share

What items are included in the first maintenance of the Vezel?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the levels of various fluids to ensure they are normal, inspecting the generator belt and wiper blades for damage; checking tire pressure for normalcy and examining tires for uneven wear, bulges, or damage; inspecting the chassis, including brake pads, brake discs, connecting rods, ball joints, CV joints, and checking for scratches, etc.; examining all switches in the vehicle; ensuring all lights are functioning properly. Estimated time: Completing all tasks takes about 2 hours. Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's first service. Note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. It's essential to attend the first maintenance promptly, neither early nor delayed. The completion of the first maintenance marks the end of the vehicle's break-in period, allowing it to be driven under standard load and normal speeds as required by the vehicle. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. The following inspections and replacements must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is normal; inspecting the vehicle's brake and clutch fluid levels; checking the power steering fluid level and looking for leaks at all fluid pipe connections; workers should inspect the generator, air conditioning, water pump, and belts for aging and tension; checking tire pressure and wear condition, adjusting tire pressure, or performing tire rotation if there is wear. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, rinsing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the cabin floor. If water enters, it won't dry but will flow through the holes to areas like the transmission, causing corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it's recommended to drain the existing antifreeze and refill with the same brand from the start. Different brands of antifreeze have varying chemical properties, and the corrosion inhibitors in one brand may corrode those in another. Different brands use different corrosion inhibitors, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a car rust, they are often oiled to function properly again. Some people apply lubricant to bolts and nuts to prevent rust, but this can pose safety risks. At high speeds, bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI car: The starter of an EFI car differs from that of a conventional car. Its fuel injection control system can automatically adjust fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.