What is the fuel tank capacity of the Xsara?

1 Answers
DelKimberly
07/29/25 6:39pm
The fuel tank capacity of the Citroën Xsara is 54 liters. Below is additional information about the Citroën Xsara: 1. The Xsara features PSA's traditional hatchback body design with a monocoque chassis. 2. The vehicle has a length of 4188mm, a width of 1705mm (with side protection strips), and a height of 1420mm (1400mm in France). Its wheelbase is 2540mm, identical to the ZX and larger than the contemporary Volkswagen Jetta IV (known as Bora in China) and Golf IV. 3. The successor to the Xsara is the C4, which shares the same platform as the 307. The C4 has a wheelbase of 2610mm, and its interior space still holds an advantage over the contemporary Volkswagen Jetta V (known as Sagitar in China) and Golf V.
Was this review help?
18
3
Share
More Forum Discussions

Does the Wuling Zhiguang have a three-way catalytic converter?

Wuling Zhiguang has a three-way catalytic converter. The following is an introduction to the three-way catalytic converter: 1. Function: The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. It can convert harmful gases such as CO, HC, and NOx in automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. Principle: When high-temperature automobile exhaust passes through the purification device, the purifying agent in the three-way catalytic converter will enhance the activity of the three gases CO, HC, and NOx, promoting certain oxidation-reduction chemical reactions. Among them, CO is oxidized into colorless and non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water and carbon dioxide at high temperatures; NOx is reduced into nitrogen and oxygen. The three harmful gases are transformed into harmless gases, thereby purifying the automobile exhaust.
5
3
Share

How to Remove a Car Rearview Mirror?

Steps to Remove the Car Rearview Mirror Housing: 1. Use a flathead screwdriver to pry open a gap from the edge between the mirror housing and the base. 2. Press the lower part of the mirror gently to widen the gap at the top. 3. Insert the flathead screwdriver into the gap between the mirror and the housing, starting from the left side to pry it open. 4. Extend the screwdriver to the right side gap between the mirror and the housing to release the internal clips. 5. Finally, gently pull the housing outward with your hand to remove it. Notes for Replacing the Car Rearview Mirror: (1) Avoid using excessive force during the process. (2) After installation, check the position of the mirror and adjust it properly.
15
0
Share

What Causes the Vehicle Battery Light to Illuminate?

Generally, when the car battery light comes on, the common fault causes include the following points: 1. Internal failure of the generator, preventing it from charging the battery normally. 2. The generator's belt is broken or has become loose and slips, making it unable to charge the battery. 3. Loose or severely oxidized positive and negative terminals of the battery, leading to poor contact. 4. Excessive battery wear or discharge issues, resulting in the inability to store power properly. If the battery has been in use for too long, it needs to be replaced promptly. If you notice the car battery light illuminating while driving, pull over immediately. The battery light coming on indicates a fault in the car's charging system. Continuing to drive at this point may lead to the battery draining completely, causing the car to stall and potentially creating safety hazards.
4
3
Share

Will I Get Penalty Points for Turning Right from a Straight-Only Lane at a Green Light?

Turning right from a straight-only lane at a green light will result in penalty points, as it constitutes a traffic violation of not driving in the designated lane. At intersections with marked directional lanes, vehicles must enter the lane corresponding to their intended direction of travel. Here are the details: Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates: When motor vehicles pass through signal-controlled intersections, they shall proceed according to the following rules: At intersections with marked directional lanes, enter the lane corresponding to the intended direction of travel. According to the "Road Traffic Safety Law", this traffic violation is punishable by a fine and 2 penalty points. There may be slight variations across different regions, and local traffic regulations shall serve as the enforcement standard.
14
1
Share

What are the main functions of an engine lubrication system?

Lubrication system has the following five major functions: 1. Lubrication: Engine oil forms an oil film between moving parts, reducing friction resistance and power loss, and minimizing component wear. 2. Cooling: Utilizing the fluidity of engine oil to carry away part of the heat from engine components, preventing excessive temperatures and burning damage. 3. Cleaning: Circulating engine oil carries away metal particles generated during engine operation, dust inhaled from the atmosphere, and some solid substances produced by fuel combustion, preventing the formation of abrasives between parts and reducing wear. 4. Sealing: The viscosity of engine oil allows it to adhere to the surfaces of moving parts, improving sealing effectiveness and reducing gas leakage. 5. Rust prevention: The lubricating oil film adheres to metal surfaces, isolating air and water, providing rust and corrosion protection.
18
2
Share

What to Do When the Car Remote Key Doesn't Respond?

Reasons and solutions for a car remote key not responding: 1. The battery is dead or has poor contact. Solution: Replace the battery. 2. The time control module in the remote key is malfunctioning. Solution: Replace the control module. 3. The antenna of the car's remote transmitter is aging. Solution: Visit a repair station for inspection and repair. Additional information: When the owner enters the effective range near the car, the vehicle will automatically detect the key and perform identity verification. If successful, it will correspondingly unlock the doors or trunk. When the owner enters the car, simply pressing the engine start button will prompt the car to automatically detect the key's position, determining whether the key is inside the car and in the driver's seat. If successful, the engine will start.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.