···
Log in / Register

What is the fuel tank capacity of the xrv?

3 Answers
HeidiLynn
07/23/25 9:04pm
The fuel tank capacity of the xrv is 50 liters. In terms of body dimensions, the Honda xrv has a length, width, and height of 4328mm, 1772mm, and 1610mm respectively, with a wheelbase of 2610mm. Among vehicles in the same class, the Xingyue L 2022 1.5T Thunder God Hi·X Hybrid Super Xun has a fuel tank capacity of 55L, while the Changan CS75 PLUS 2022 1.5T Automatic Elite has a fuel tank capacity of 58L. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
20
5
Share
Ramos
08/10/25 4:40pm
As a regular user of this car, I have to say the XR-V's fuel tank is about 50 liters. Normally, when I drive it around the city, a full tank can last for about 500 to 600 kilometers, depending on road conditions and speed. If I drive at 120 km/h on the highway, the fuel consumption is lower, and I can go even further; in traffic jams, the fuel burns faster. Last week, I took my friends for a trip to the suburbs—filled up before leaving and didn’t need to refuel until a day and a half later. It’s really hassle-free. In terms of refueling frequency, I usually fill up once a week, costing around 300 yuan, which isn’t expensive. Overall, the tank size feels quite reasonable—it doesn’t take up too much space but ensures practical range. If you have long-distance needs, the 50-liter capacity is enough to save you the hassle of frequent gas station stops, making it perfect for city commutes and short trips. It’s more than sufficient.
Was this review help?
16
1
Share
Expand All
DaniellaFitz
09/23/25 4:22am
From a technical perspective, the XR-V's fuel tank capacity is approximately 50 liters. This design is quite intelligent—considering the vehicle's weight balance and space utilization, engineers selected this size to optimize range and performance. Paired with the standard 1.5L engine's fuel consumption of 14 to 18 km/L, a full tank can reliably cover over 500 kilometers. I've tested it several times; the tank's lightweight material doesn't add much burden and also reduces accident risks. A related point is that the tank size affects aerodynamic drag and overall efficiency—the 50-liter capacity neatly avoids frequent refueling hassles while maintaining compatibility with the compact design for urban driving. If you're curious about specific models, there might be minor adjustments across different year versions, but most fall within the 50-liter range.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

Where is the fuse box of the Volkswagen Lavida located?

The fuse box of the Volkswagen Lavida is located inside the instrument panel cover on the left side of the driver's seat. When replacing fuses, the following aspects need to be noted: 1. Turn off the ignition switch, lights, and all electrical appliances. There is a card and a fuse clip on the back of the removed cover, which can be used to remove the damaged fuse. 2. The fuse box has a white card indicating the positions of the fuses corresponding to various electrical appliances. The card can be removed. The front side of the card corresponds to the upper part of the fuse socket, and the back side corresponds to the lower part. When replacing fuses, always refer to this reference table to determine the name and function of each fuse to avoid incorrect replacement. 3. Use the clip to remove the relevant fuse. If the fuse is blown, only replace it with a new fuse of the same current rating and size. The Lavida uses blade-type fuses, which are commonly used in many vehicle models. They can be purchased at regular auto parts stores. Finally, use the clip to hold the new fuse and insert it into the correct position. After installation, remember to return the card and clip to their original places.
16
4
Share

How to Remove the Nissan Tiida Evaporator?

Steps to remove the Nissan Tiida evaporator are as follows: 1. Prepare a bottle of automotive air conditioning cleaner and an air filter. Tools required: one 5.5mm socket wrench and one Phillips screwdriver. 2. Since automotive air conditioning cleaners come with instructions, focus on removing and installing the air filter and dismantling the glove box. 3. Start with the bottom two of the five screws, then proceed to the top three. It's advisable to support the glove box with your hand or leg during removal to prevent excessive force on the screw holes that could cause deformation. 4. To remove the air filter, first locate the plastic cover panel under the front passenger side. Use a 5.5mm hex socket wrench to unscrew the three screws and remove the dirty filter. Then replace the plastic cover panel and secure it with screws. Normally, the car's evaporator should be cleaned before and after summer use. However, if there are issues like mold, it's advisable to clean it earlier to ensure proper cooling. There are various methods to clean the evaporator. If opting for disassembly cleaning, it's essential to visit a professional auto repair shop due to the high cost and technical nature of the process, which could easily damage other components. DIY disassembly cleaning is not recommended.
9
1
Share

How to Replace the Taillight of a Teana?

The steps to replace the rear taillight of a Teana car are as follows: 1. Open the trunk. 2. Remove the trunk's inner lining. After opening the trunk, first remove the inner lining on the side of the taillight. The lining is secured with several plastic clips. Use a small flathead screwdriver to gently pry these clips open, then pull the lining aside by hand. Be careful to pry gently to avoid damaging the plastic clips. 3. Remove the nuts securing the taillight. There are three nuts securing the rear taillight. Use a small ratchet with an 8mm socket to remove each of the three nuts one by one and set them aside. 4. Disconnect the taillight wiring harness. The taillight wiring harness has only one plug. Simply pull this plug out by hand. If it's difficult to remove, gently pry it with a small flathead screwdriver. 5. Replace the taillight. After disconnecting the wiring harness, hold both sides of the taillight with your hands and gently pull outward while slightly shaking it. This will allow you to remove the taillight. Be careful not to use excessive force.
10
2
Share

Where is the Citroen Air Filter Located?

The Citroen air filter is located inside the glove compartment on the passenger side. After removing the glove compartment, you can see the air filter. The main function of the car air filter is to separate solid impurities such as dust, pollen, and grinding particles from the air, ensuring that passengers and drivers do not experience allergic reactions that could affect driving safety. The specific functions of the air filter are as follows: 1. Ensure the air filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. Separate solid impurities such as dust, pollen, and grinding particles from the air. 3. Adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting adsorption capabilities. 4. Prevent the car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving. 5. Provide fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 6. Maintain clean air in the cabin, preventing bacterial growth and creating a healthy environment. 7. Effectively separate solid impurities such as dust, core powder, and grinding particles from the air. 8. Effectively intercept pollen, ensuring that passengers and drivers do not experience allergic reactions that could affect driving safety.
6
5
Share

What is the brand of the transmission in the Haima S5?

Haima S5's transmission is a self-developed brand by Haima. The transmission model of the Haima S5 is VT3, with a maximum torque load of 220 Nm at 2200 rpm and a maximum power of 122 kW at 5700 rpm. The transmission comes in two types: manual and automatic. The manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations. The automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system.
17
5
Share

How to Identify the Production Date of a Seat Belt?

There is a label on the car seat belt that indicates the production date of the seat belt. More information about car seat belts is as follows: 1. A car seat belt is a device used in vehicles to ensure the safety of passengers and the driver by preventing them from being injured by the deployment of airbags when the vehicle body is subjected to a violent impact. 2. To prevent serious injuries in the event of a collision, public security departments require drivers of small passenger vehicles and front-seat passengers to use seat belts. In the event of a traffic accident, the seat belt acts as a buffer to prevent secondary injuries.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.