What is the fuel tank capacity of the Xingrui?

2 Answers
IsabelaLynn
08/28/25 5:42am
The fuel tank capacity of the Xingrui is 50L, as officially announced. Owners who have purchased the Xingrui can also check this information on the vehicle's configuration sheet. The Xingrui requires 95-octane fuel, with a fuel consumption of 6.7L per 100 kilometers. A full tank can cover a distance of approximately 746km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. Most fuel gauges have 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This extra space ensures that the fuel can expand safely when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount added may exceed the marked capacity.
Was this review help?
9
5
Share
SabrinaAnn
09/10/25 4:05am
I've been driving the Xingrui for two years now, and I remember clearly that its fuel tank capacity is 50 liters. For my daily commute, I usually refuel once a week. A full tank can last around 500 kilometers, but in heavy city traffic, the range drops to just over 400 kilometers. Here's a small tip: don't wait too long after the fuel warning light comes on to refuel, because the fuel pump relies on gasoline for cooling, and prolonged low fuel levels can shorten the pump's lifespan. Additionally, the Xingrui's fuel tank is made of resin material, which is more corrosion-resistant and lightweight compared to steel tanks—a thoughtful detail from Geely. For occasional long-distance trips, service area intervals are generally within 300 kilometers, so the 50-liter tank is perfectly adequate without worrying about range anxiety.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

Which button is for the car windshield washer fluid?

Car windshield washer fluid button is located on the right-hand stalk behind the steering wheel, marked with a water spray icon. Windshield washer fluid is a consumable liquid used to clean vehicle windshields, primarily composed of water, alcohol, and ethylene glycol, featuring cleaning, antifreeze, and anti-fog functions. The steps to add windshield washer fluid are: 1. Open the front hood; 2. Open the washer fluid filler cap; 3. Fill with washer fluid up to the marked level. The performance and characteristics of windshield washer fluid include: 1. Cleaning performance: Formulated with multiple surfactants and additives that provide wetting, penetration, and solubilization functions; 2. Antifreeze performance: Significantly lowers the freezing point of the liquid; 3. Anti-fog performance: Forms a monomolecular protective layer on the glass surface.
9
3
Share

What transmission is used in the new Mercedes-Benz B-Class?

The new Mercedes-Benz B-Class is equipped with a 7-speed dual-clutch transmission. The B-Class features three engine options: a low-power version of the 1.3-liter turbocharged engine, a high-power version of the 1.3-liter turbocharged engine, and a 2.0-liter turbocharged engine. The Mercedes-Benz B-Class is a compact sports tourer with dimensions of 4273mm in length, 1777mm in width, and 1593mm in height, with a wheelbase of 2778mm. In terms of interior design, the car's cabin shows no significant differences from previous Mercedes models. The dashboard layout still follows the traditional Mercedes design, except that the central display in the Fashion trim does not come with a navigation system. Instead, it features a simple color display providing functions such as audio, hands-free Bluetooth calling, and system settings.
5
2
Share

How to Remove the Maintenance Reminder on a Ford Vehicle?

Steps to remove the maintenance reminder on a Ford vehicle: 1. Turn the ignition key to the second position, hold down the trip reset button without releasing, rotate the key until the dashboard lights up, then release to turn off the maintenance light. There is a button on the dashboard used to adjust the mileage—press and hold this button for 2 to 3 seconds while idling; 2. Simultaneously press the brake and accelerator pedals, waiting for the maintenance light to flash for about 15 seconds; 3. Release the brake and accelerator pedals. The appearance of the maintenance reminder indicates that maintenance is due soon. After maintenance, the 4S store will remove this maintenance reminder symbol from the vehicle's computer. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing.
5
3
Share

How to Turn on the Low Beam Headlights on the Atenza?

Atenza's method of turning on the low beam headlights is to rotate the knob on the turn signal lever counterclockwise to the end, then pull the lever toward the steering wheel. Low beam headlights are designed for close-range illumination, with a large coverage area and short illumination distance, and the focus cannot be adjusted. The Atenza has a length, width, and height of 4870mm, 1840mm, and 1445mm respectively, a wheelbase of 2830mm, a minimum ground clearance of 162mm, and a fuel tank capacity of 56.2 liters. This car is equipped with a 2.0L naturally aspirated engine, with a maximum power of 116kW, a maximum power speed of 6400rpm, a maximum torque of 202Nm, and is paired with a 6-speed manual/automatic transmission.
13
0
Share

Can the transmission side cover be damaged while driving?

Vehicle driving will not damage the transmission side cover, but if the transmission side cover hits a road protrusion while driving, it may cause damage. The transmission, also known as the gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output shaft and input shaft. The transmission consists of a gear transmission mechanism and an operating mechanism, with some vehicles also having a power output mechanism. It can be categorized into stepped, continuously variable, and integrated transmissions, featuring functions such as enabling reverse driving, interrupting power transmission, and changing gear ratios. The transmission is a crucial component in vehicles, capable of altering the gear ratio and expanding the driving wheel's torque and rotational speed.
14
2
Share

What is the procedure for replacing the rear brake pads on the Atenza?

The procedure for replacing the rear brake pads on the Atenza is as follows: 1. Remove the wheel and take off the dust cover; 2. Remove the caliper fixing bolts and take off the brake caliper; 3. Remove one of the fixing bolts on the brake caliper, and use a flat-head screwdriver to apply force to the caliper, allowing the brake cylinder piston to retract automatically; 4. Take out the brake pads. Alternatively, you can use a piston adjustment tool to press back the brake cylinder piston, then remove and insert the new brake pads. The Atenza is a mid-size car produced by FAW Mazda, with dimensions of 4870 mm in length, 1840 mm in width, and 1445 mm in height, and a wheelbase of 2830 mm.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.