What is the fuel tank capacity of the Xiali N5 in liters?

2 Answers
DelSteven
07/24/25 2:29am
The fuel tank capacity of the Xiali N5 is 37 liters, as officially announced. The Xiali N5 uses 92-octane gasoline, with a fuel consumption of 5.6-5.8L per 100 kilometers. A full tank can cover a distance of 637-660km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
16
4
Share
SanMiranda
08/10/25 10:07pm
I have over a decade of driving experience. The Xiali N5 has a 37-liter fuel tank, which is quite reasonable for urban commuting. I remember when I drove it, a full tank could last around 500-600 kilometers, with the engine averaging 5-6 liters per 100 kilometers—both economical and hassle-free. For daily commuting, a full tank could last a week, avoiding the inconvenience of frequent refueling. The fuel tank design is practical, located under the chassis, making it easy to check for cracks or leaks. I recommend regularly cleaning the inside of the tank to prevent debris buildup from affecting the fuel pump's lifespan. Before long-distance driving, always check the fuel level to avoid running out mid-journey and causing inconvenience.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How often should the Kuga's air filter be replaced?

The Kuga's air filter should be replaced every 25,000 kilometers or 18 months. If the vehicle is used in areas with severe haze, it is recommended to replace it as needed, possibly earlier. A high-quality air filter can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. The Kuga is a compact SUV launched by Ford, with body dimensions of 4524mm in length, 1838mm in width, and 1701mm in height, and a wheelbase of 2690mm. In terms of exterior design, the Kuga features robust lines and adopts the family-style hexagonal grille design on the front face.
10
4
Share

What colors are available for the Changan CS15?

Changan CS15 comes in the following colors: Snowfield White, Flashy Orange-Yellow, Flash Pearl Black, Vibrant Red, and Flash Deep Sea Blue. Taking the 2021 Changan CS15 as an example, its body dimensions are: length 4135mm, width 1740mm, height 1630mm, wheelbase 2520mm, minimum ground clearance 150mm, and curb weight 1210kg. The 2021 Changan CS15 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 107PS, maximum torque of 145Nm, and maximum power of 78.5kW, paired with a 5-speed manual transmission.
4
3
Share

What is the Optimal Economical RPM for Diesel Engines?

Diesel engines typically have an economical RPM range of: 1500-2000r/min. Below are relevant details about diesel engine RPM:1. Maximum No-Load RPM: This refers to the highest RPM a diesel engine can achieve at full throttle without any load. It's generally 5%-10% higher than the rated RPM. The engine should not operate at this speed for more than 1-2 minutes.2. RPM Varies by Application: The operating RPM of diesel engines differs according to their specific applications, even for engines of the same model. Automotive diesel engines have the highest RPM, usually operating at the rated (or specified) RPM - which is the maximum RPM at which the engine can run under full load.
9
3
Share

How many cans of refrigerant are needed when replacing the compressor on a Baojun 730?

When replacing the compressor on a Baojun 730, approximately 4 to 5 cans of refrigerant are required. High-pressure side liquid refrigerant charging: This method is suitable for charging after leak detection and vacuuming. Note that the compressor must not be turned on during this process, the engine should be off, and the refrigerant can must be inverted. Low-pressure side charging: This involves charging with gas, which is characterized by a slower filling speed and is typically used for refrigerant replenishment. Automotive refrigerant, commonly referred to as Freon, is the substance used in car air conditioning systems. It continuously circulates within the refrigeration system and achieves cooling through changes in its own state.
1
1
Share

What is the wading depth standard for electric vehicles?

Electric vehicles have a wading depth standard that should not exceed 30 centimeters. Below are specific details about vehicle wading standards: 1. Vehicle Type: Different vehicle types have varying wading depth standards. Sedans have a wading depth of 20-30 centimeters, SUVs 30-60 centimeters, and hardcore off-road vehicles can reach 70-100 centimeters. 2. Issues After Wading: Deformation and damage to the crankshaft connecting rod mechanism. When a mixture of water and air enters the engine through the intake, since gases are compressible but liquids are not, the connecting rod may deform under the influence of water. If the driver attempts to start the vehicle at this point, the immense reactive force can cause the bent connecting rod to rub against the cylinder block, resulting in irreversible damage to the cylinder block.
2
2
Share

What engine is used in the BAIC Zhida X3?

BAIC Zhida X3 is equipped with a 1.5L naturally aspirated engine and a 1.5T turbocharged engine, which are the A151E engines jointly developed by Mercedes-Benz, Mitsubishi, and BAIC. The 1.5L engine has a maximum power of 85 kW and a peak torque of 146 Nm, meeting the National V emission standard. The 1.5T engine delivers a maximum power of 110 kW and a peak torque of 210 Nm, complying with the National VI emission standard. The BAIC Zhida X3 is the third model of BAIC's 2.0 AI era. In terms of body dimensions, the BAIC Zhida X3 measures 4325mm in length, 1830mm in width, and 1640mm in height.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.