···
Log in / Register

What is the fuel tank capacity of the Xiali N5?

3 Answers
VanSarah
09/06/25 5:56am
The 2014 Xiali N5 1.0L manual standard model has a fuel tank capacity of 37L. It is equipped with a 1.0L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is MacPherson strut independent suspension, while the rear suspension features an independent double-wishbone MacPherson strut with lateral stabilizer. In the same vehicle class, the 2022 Vios 1.5L CVT Xing CARE edition has a fuel tank capacity of 42L, and the 2020 Huanchi 1.4L automatic comfort sunroof edition has a fuel tank capacity of 43L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers is measured from the tank bottom to the safe fill level, with additional space between the safe fill level and the tank opening. This space ensures that fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the calibrated tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
Was this review help?
5
1
Share
Polly
09/18/25 5:41am
I've been driving a Huali N5 for several years now, and as my daily commuting companion, it has a standard fuel tank capacity of 37 liters. A full tank can take me about 600 kilometers, which is quite economical for young people like me who commute in city traffic. One tank lasts me a whole week. I usually keep the fuel consumption around 6L/100km, so it's both cost-effective and worry-free. I recommend regularly checking the fuel tank cap's seal and not waiting until it's almost empty to refuel, as this is good for the engine's maintenance. My friend also drives this car, and we both think the tank size is just right—not too big or too small—avoiding frequent trips to the gas station.
Was this review help?
18
3
Share
Expand All
IsabelleDella
11/01/25 6:08am
As a car enthusiast, I'm quite interested in the fuel tank details of the Xiali N5, which has a standard capacity of 37 liters. The tank is positioned quite reasonably near the rear of the car, reducing the impact on the center of gravity. When filled up, the car maintains good balance. I usually fill it with 92-octane gasoline, and the range is about 500-600 km. However, if you add some fuel-saving accessories, like an air filter, the range might improve a bit. Remember not to exceed the tank's pressure limit, as it could lead to oil leaks. Compared to similar small cars, this tank size is moderate, making it suitable for beginners to practice with or for short trips.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What does trip mean in the car?

The trip in the car is an odometer, but it does not record the total mileage. Instead, it is used to record the mileage of each trip. The one on the left is the total mileage of the car. The car trip is very useful. It can be reset and used to measure the distance between two places. This is different from the total mileage. The car trip meter consists of two LCD digital display windows connected to the same signal source, which accumulate the current trip and the total trip respectively. The current trip usually has four digits for short-term counting and can be reset; the total trip has six digits and cannot be reset. The accumulated trip numbers of the electronic trip meter are stored in non-volatile memory, and the data can be preserved even without power.
18
5
Share

What is the typical fuel consumption of the Passat 2.0L?

The typical fuel consumption of the Passat 2.0L is 6.3 (L/100km). Below is an introduction to the Passat 2.0L: 1. Interior: The dual-tone interior design primarily utilizes leather, faux wood, and chrome, creating a modern aesthetic through the interplay of these three textures. In terms of materials, the new Passat has almost no exposed plastic modules, with the leather and faux wood textures being of good quality. 2. Powertrain: It offers three different power outputs across two displacements—a 1.4T high-power version and 2.0T versions with both high and low power outputs. The 1.4T high-power model delivers a maximum horsepower of 110 kW and a peak torque of 250 N·m. For the 2.0T low-power tuned version, the maximum power is 137 kW at 4100-6000 rpm, with peak torque reaching 320 N·m at 1500-4000 rpm. The high-power version of the 2.0T engine achieves a maximum power of 162 kW and a peak torque of 350 N·m at 4500-6250 rpm. The 2.0T models are upgraded with the latest DQ381 7-speed dual-clutch transmission. Thanks to this transmission upgrade, friction factors are reduced, and efficiency is improved, resulting in a maximum reduction of 0.5 L/100km in fuel consumption compared to older models. Additionally, both performance and smoothness have been enhanced.
17
2
Share

How to Check Mileage on a Mercedes-Benz?

Mercedes-Benz mileage can be viewed on the dashboard screen by switching to the odometer using the multifunction buttons on the steering wheel. The method is: first exit to the homepage, then select 'Trip' as the first option. By scrolling up and down, you can see instantaneous fuel consumption, average fuel consumption, total mileage, etc. Move to 'Total Mileage' to view it. Mercedes-Benz is a German automotive brand. The dimensions of the Mercedes-Benz C200 are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. The C200 features rear-wheel drive with front-engine layout, multi-link independent suspension at both front and rear, and a unibody construction.
6
2
Share

What is the range of the Qiantu K50 in kilometers?

The official range of the Qiantu K50, as provided by the Ministry of Industry and Information Technology, is 380 kilometers, but the actual range is usually less than this figure. The Qiantu K50 is a pure electric vehicle among domestic cars, with dimensions of 4634mm in length, 2069mm in width, and 1253mm in height, and a wheelbase of 2650mm. The Qiantu K50 is powered by two electric motors, one on the front axle and one on the rear axle, achieving four-wheel drive. The front motor has a maximum power of 160kW and a maximum torque of 340Nm, while the rear motor also has a maximum power of 160kW and a maximum torque of 340Nm. Both the front and rear suspensions of the car use double-wishbone independent suspension.
3
5
Share

What does the red exclamation mark on the vehicle dashboard indicate?

When a red exclamation mark appears on the vehicle dashboard, it indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system warning light, transmission fault indicator, and windshield wiper fault indicator. There are generally three types of exclamation mark warning lights on the car dashboard: 1. A triangle with an exclamation mark inside, which is a general fault indicator; 2. A circle with parentheses and an exclamation mark inside, which is a brake system warning light; 3. A horizontal line with parentheses below and an exclamation mark inside, which is a tire pressure monitoring warning light. This light illuminates when the air pressure in one of the vehicle's tires is too low.
13
1
Share

Do You Need to Press the Clutch When Reversing in a Manual Transmission Car?

When reversing in a manual transmission car, you need to press the clutch and use the half-clutch state to control the speed for safer reversing. The clutch is primarily used to connect or interrupt power transmission. It is necessary to press the clutch when shifting into reverse gear. After engaging the gear, you should slowly release the clutch to ensure smooth gear shifting. A manual transmission, or manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. Its working principle involves using the shift fork to change the transmission ratio of the meshing gears, which in turn modifies the driving torque to suit different driving conditions.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.