What is the fuel tank capacity of the Wuling Rongguang Extended Version?

1 Answers
VanGenevieve
07/30/25 4:16am
2021 Wuling Rongguang Extended Version has a total of 9 models, all with a fuel tank capacity of 45 liters. The entire lineup is equipped with the L3C engine, a 5-speed manual transmission (MT), and features a mid-engine, rear-wheel-drive configuration. In the same vehicle class, the Wuling Hongguang-2021-1.5L-S Basic Type LAR has a fuel tank capacity of 50 liters, while the Dongfeng Xiaokang C36-2019-1.5L Basic Type II National VI-DK15 has a fuel tank capacity of 55 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
16
5
Share
More Forum Discussions

What does DIAG mean in diesel vehicles?

DIAG in diesel vehicles refers to the self-diagnosis function of the engine's electronic control system. Below is additional information: 1. DIAG: DIAG is the ECU computer diagnostic switch. When the engine fault light and SVS light on the dashboard illuminate, this switch can be used for the ECU to diagnose fault codes, making it easier to locate and repair faults. Regular use of this button can correct system data that has been lost over time in the electronic control system, ensuring its proper operation. 2. ECU: The ECU (Electronic Control Unit), also known as the vehicle computer or onboard computer, is a specialized microcomputer controller for automobiles. It is also referred to as a dedicated automotive microcontroller, composed of a microprocessor (CPU), memory (ROM, RAM), input/output interfaces (I/O), analog-to-digital converters (A/D), as well as shaping, driving, and other large-scale integrated circuits.
10
0
Share

Can I drive my car to the inspection if it has passed the inspection deadline?

If your car has passed the inspection deadline, you cannot drive it to the inspection. You must arrange for a tow truck to transport it to the inspection site, as driving the vehicle yourself for inspection is not allowed. It is crucial to complete the vehicle annual inspection procedures within the specified timeframe. If the inspection is overdue for three years, the car will be deregistered and forcibly scrapped. Driving a scrapped vehicle will result in a penalty of 12 points deducted from your driver's license. The annual inspection includes the following items: 1. Emission test: This is the first step of the inspection, primarily checking if the emissions meet the standards. 2. Violation check: Verifying if the owner has any outstanding traffic violations. 3. Exterior inspection: Checking if the car's lights, suspension, sunroof, tires, and other exterior components remain unchanged. 4. On-road test: Inspecting the car's braking system, control system, lights, chassis, and other components.
4
3
Share

Does it matter if the brake fluid hasn't been changed for seven years?

Brake fluid replacement must strictly follow the maintenance manual requirements and should not be overdue. Prolonged use beyond the recommended period will affect the performance of the brake fluid and may compromise the safety of the braking system. Here's how to determine when to replace brake fluid: 1. Moisture content: The replacement cycle varies by vehicle model, so always refer to the maintenance manual. A moisture content of 1% is normal, while 3% generally suggests replacement is needed, and 5% requires immediate replacement. 2. Color: Qualified brake fluid is slightly yellow. If the brake fluid becomes cloudy or black, it must be replaced.
9
3
Share

Why Can't the Key Be Pulled Out of the Buick Excelle?

The main reason why the key cannot be pulled out of the Buick Excelle is that the spring inside the button on the gear shift lever has not reset, preventing the key from being removed. Below are the relevant explanations: 1. The key cannot be turned after insertion: The primary reason the key cannot be turned is that the steering wheel was not returned to its original position during the last parking, causing the steering wheel to lock abnormally. If this happens, gently turn the key with your right hand while slightly shaking the steering wheel left and right with your left hand, and the key can then be turned. 2. The key cannot be pulled out after turning off the engine: This phenomenon often occurs in automatic transmission vehicles. The reason is that the automatic transmission's P (Park) position has not fully engaged. Sometimes it may appear to be in place, but it hasn't triggered the electronic sensor, or there might be obstacles like coins in the gear slot preventing it from fully engaging.
17
1
Share

What is the 6-digit default password for car navigation?

The 6-digit default password for car navigation is: 000000, 123456, or 888888. Here is some additional information: 1. Car navigation: Car navigation uses the onboard GPS (Global Positioning System) in conjunction with electronic maps to conveniently and accurately inform the driver of the shortest or fastest route to the destination, making it a great assistant for drivers. 2. Precautions: Do not use chemical reagents or cleaning agents to clean the navigation device, as this may damage the machine's surface and corrode the paint; to prevent electric shock, avoid plugging or unplugging the power with wet hands, and ensure the power plug is fully inserted into the socket; do not charge the GPS in excessively cold or hot environments, as this may impair the battery's performance.
20
2
Share

How to Clean the Car Chassis?

Car chassis cleaning method is as follows: 1. Lift the car to working height, rinse the chassis with high-pressure water jets, and repeatedly flush curved areas, edges, and fender parts to ensure no mud or grease adheres. 2. For particularly thick grease stains, use degreaser and a scraper to carefully clean until the chassis reveals its original color. If rust is present, use sandpaper to remove it. 3. Dry and wipe the car chassis clean, then evenly spray rust-proofing agent to form a long-lasting protective film. Allow it to air dry naturally after completion.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.