What is the fuel tank capacity of the Wuling mini truck?

How to Open the Trunk of an Audi A5?

The trunk of an Audi A5 can be opened by pressing the trunk release button on the remote key, or by pulling the unlock button inside the driver's side door, which will unlock and pop open the trunk. Of course, it can also be opened using the switch on the trunk handle. When the vehicle is locked, pressing the trunk release button on the remote key can unlock the trunk separately. If the trunk is closed again, it will automatically lock. There are several ways to open a car trunk: 1. Mechanical Key: Insert the key into the tailgate lock to open or close the trunk. This is the most basic mechanical method, harking back to the era when car trunks first appeared and were operated solely with mechanical keys. Nowadays, this method is considered too cumbersome and has largely been phased out. 2. Remote Key Direct Opening: Using the remote key to open the car trunk is the most straightforward and simplest method. It's quite easy to use—just take out the remote key and press the trunk release button to open it. 3. Pressing the Unlock Button: Some car models may not have a dedicated trunk release button on the remote key. In such cases, simply pressing the unlock button will also release the trunk lock. 4. Smart Key + Trunk Switch: Another method involves models equipped with a smart key. As long as the remote key is within a certain range (usually about 1 meter), pressing the switch on the trunk will directly open it.

14

0

Share

What is the acceptable approach angle for an SUV?

The approach angle of an SUV is generally greater than 20°. For example, the Audi Q5L has an approach angle of 23°. The ground clearance, approach angle, and departure angle are three parameters that affect a vehicle's off-road capability. The larger these parameters are, the better the vehicle's off-road performance. Specific explanations are as follows: 1. Ground clearance: The distance between the lowest protruding part of the vehicle's chassis and the horizontal ground when the vehicle is fully loaded (with the maximum allowable load mass). The minimum ground clearance reflects the vehicle's ability to pass over obstacles or uneven terrain without collision. 2. Approach angle: When the vehicle is fully loaded and stationary, the angle between the tangent line drawn from the frontmost protruding point of the vehicle to the front wheels and the ground. This is the maximum angle between the horizontal plane and the plane tangent to the outer edge of the front wheel tires (static load). Any rigid component fixed to the vehicle in front of the front axle must not be below this plane. The larger the approach angle, the better the vehicle's ability to pass over obstacles. 3. Departure angle: When the vehicle is fully loaded and stationary, the angle between the tangent line drawn from the rearmost protruding point of the vehicle to the rear wheels and the road surface. This is the maximum angle between the horizontal plane and the plane tangent to the outer edge of the rearmost wheel tires (static load). Any rigid component fixed to the vehicle behind the rearmost wheels must not be below this plane. It indicates the vehicle's ability to leave obstacles (such as small hills, ditches, etc.) without collision. The larger the departure angle, the better the vehicle's off-road capability.

9

1

Share

When does a manual transmission car require a major maintenance at tens of thousands of kilometers?

A manual transmission car requires a major maintenance at 60,000 kilometers. Major and minor maintenance are alternated: Major maintenance is based on minor maintenance, and these two types of maintenance are alternated. The time interval varies depending on the car brand and the vehicle's condition. Generally, it is recommended to perform a "minor maintenance" every 5,000 kilometers. During "minor maintenance," the oil filter and engine oil are replaced. It is advisable to choose an authorized 4S shop for maintenance, as although the price may be higher, the quality is guaranteed. Major maintenance items: First, check the tire wear and replace if necessary. If the water temperature is normal, the brakes are functioning properly, the antifreeze is not cloudy, there is no need for replacement. If the idle is stable, there is no shaking, high gear shifts are smooth, fuel consumption has not significantly increased recently, low gear shifts when the car is warm show no noticeable hesitation, there is no significant loss of power, then there is no need to clean the throttle or replace the spark plugs. If gear shifts are smooth without any stiffness, the transmission oil can be considered for replacement after 80,000 kilometers. Additionally, routine maintenance includes engine oil, oil filter, air filter, and checking the engine and transmission for any oil leaks or seepage.

15

1

Share

What is the original tire model of the Cadillac XTS?

There are two types of tires for the Cadillac XTS, which are 235/50R18 and 245/45R19. The first number 235 indicates the tire width is 235MM, 50 means the aspect ratio of the tire section is 50%, that is, the section height is 50% of the width, the letter R represents radial tire, and 18 indicates the rim diameter is 18 inches. The Cadillac XTS can reach a top speed of 218km/h. It accelerates from 0 to 100km/h in 8.1 seconds and has a fuel consumption of 7.9L per 100km. In addition to the model, the tire also has the following common data marked on it: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification that matches the tire. It is convenient for practical use, such as 'Standard rim 5.00F'.

13

2

Share

What are the differences between Audi S7 and RS7?

Appearance, power, and drive system are the differences between the Audi RS7 and Audi S7. The S7 is developed based on the Audi A7, which is the first generation of this model series. The Audi RS7 is a new model in the Audi RS series designed by designer Adriano Mudri. The specific differences between the Audi RS7 and S7 are as follows: Appearance: The Audi S7 has a more noticeable sporty exterior design. However, as the highest-performance model in this series, the Audi RS7 uses a sport package, highlighting its sporty performance with prominent RS badges. Its side body and rear design are similar to the Audi R8, while the car doors adopt Lamborghini's classic scissor door design. The rear lines are more rounded, featuring a dual-exit exhaust system, giving it a more sporty potential. The taillight strips and the raised rear spoiler are highlights, with tire specifications of 255/35R21 and body dimensions of 4979*1908*1413mm. The Audi RS7 features a simpler dual single-barrel exhaust system, giving it a supercar feel. It also adopts a full-width taillight strip design, in line with Audi's reputation as the "Light Factory." The tire specifications are 275/35R21, and the body dimensions are 5009*1950*1422mm. Power: The Audi S7 is equipped with a DKM twin-turbocharged engine, paired with a 7-speed dual-clutch transmission, with a displacement of 2.8L and a fuel grade of 95. The DKM twin-turbocharged engine has a maximum output power of 331 kW and a maximum torque of 600 Nm, with a 0-100 km/h acceleration time of 4.6 seconds and an NEDC combined fuel consumption of 9.1L/100km. The Audi RS7 is equipped with a DJP twin-turbocharged engine, paired with an 8-speed automatic transmission, with a displacement of 4.0L and a fuel grade of 98. The DJP twin-turbocharged engine has a maximum output power of 411 kW and a maximum torque of 800 Nm, with a 0-100 km/h acceleration time of 3.7 seconds and an NEDC combined fuel consumption of 11.7L/100km. Drive System: The main difference lies in the four-wheel-drive system. The Audi S7's center differential is a crown gear differential, while the Audi RS7's center differential is a Torsen-based quattro system.

17

2

Share

What is the tire size of the Nissan Tiida?

The Nissan Tiida has two types of tire sizes: front and rear tire size 195/60R16 and front and rear tire size 205/50R17. The data 205 represents the tire's section width of 205mm; 50 represents the tire's aspect ratio; R stands for radial tire; 17 indicates the rim diameter of 17 inches. The data 195 represents the tire's section width of 195mm; 60 represents the tire's aspect ratio; R stands for radial tire; 16 indicates the rim diameter of 16 inches. The middle letters or symbols have special meanings: "X" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "—" indicates a low-pressure tire. The Nissan Tiida uses tires from three brands: Chaoyang tires, Dunlop tires, and Bridgestone tires. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".

20

1

Share

What is the fuel tank capacity of the Wuling mini truck?

How to Open the Trunk of an Audi A5?

What is the acceptable approach angle for an SUV?

When does a manual transmission car require a major maintenance at tens of thousands of kilometers?

What is the original tire model of the Cadillac XTS?

What are the differences between Audi S7 and RS7?

What is the tire size of the Nissan Tiida?

What Causes the Creaking Sound When Pressing the Front of the Car?

What Causes No Airflow in the First and Second Gears of a Car's Air Conditioning?

What's the matter if the car's starter motor doesn't respond?

Encore 1.4T Fuel Consumption