What is the fuel tank capacity of the Volvo XC60 in liters?

Can 92 and 95 gasoline be mixed?

92 gasoline and 95 gasoline cannot be mixed because their isooctane content is different. 92 gasoline is suitable for engines with low compression ratios, while 95 gasoline is suitable for engines with high compression ratios. If 92 gasoline is added to a car that should use 95 gasoline, abnormal combustion may occur, leading to knocking. Knocking not only damages the combustion chamber but also directly affects the normal operation of the engine, and in severe cases, may cause engine damage. If 95 gasoline is added to a car that should use 92 gasoline, although it will not damage the engine, 95 gasoline is more expensive than 92 gasoline, resulting in waste. The difference between 92, 95, and 98 gasoline: Standard gasoline is composed of isooctane and n-heptane. Isooctane has good anti-knock properties, and its octane number is defined as 100; n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, so its octane number is defined as 0. If the gasoline is labeled as 92, it means that this gasoline has the same anti-knock properties as standard gasoline containing 92% isooctane and 8% n-heptane. The same principle applies to 95 and 98 gasoline. What to do if the wrong gasoline is added: If gasoline with a higher octane number than specified is added, for example, adding 95 gasoline when 92 is specified, simply switch back to 92 gasoline after the current fuel is consumed. If gasoline with a lower octane number than specified is added, for example, adding 92 gasoline when 95 is specified, you can add a high anti-knock fuel additive. Of course, you can also directly drain the fuel and refill with 95 gasoline. To find out which gasoline your car requires, you can check the car's user manual or the fuel label on the fuel tank cap.

15

2

Share

What transmission is used in the BJ80?

All models of the BJ80 use a 6AT transmission, which offers good reliability and durability. AT transmissions can also withstand high torque. The AT transmission is also known as a torque converter transmission, and it is connected to the engine via a torque converter. There are three common types of automatic transmissions: dual-clutch transmission (DCT), AT transmission, and CVT transmission. The CVT transmission has good reliability and durability, but it cannot withstand high torque. The dimensions of the BJ80 are 4765 mm in length, 1955 mm in width, and 2005 mm in height, with a wheelbase of 2800 mm.

19

0

Share

How many cylinders does the BJ80 engine have?

The BJ80 engine is an inline four-cylinder. The BJ80 uses a 2.3-liter turbocharged engine. The 2.3-liter turbocharged engine of the BJ80 has a maximum power of 170 kilowatts and a maximum torque of 345 Newton meters. This engine is paired with a 6-speed automatic transmission. The turbocharger consists of two parts: one is the exhaust turbine, and the other is the intake turbine. The exhaust turbine is connected to the engine's exhaust manifold, while the intake turbine is connected to the intake pipe. When the engine reaches a certain speed, the exhaust turbine rotates, and the intake turbine also rotates. The dimensions of the BJ80 are 4765 mm in length, 1955 mm in width, and 2005 mm in height, with a wheelbase of 2800 mm.

4

Share

Where is the cabin air filter of the BJ80 located?

The cabin air filter of the BJ80 is located behind the glove compartment on the passenger side. To replace the cabin air filter, you need to remove the glove compartment. The cabin air filter is an important component of the car's air conditioning system, and this part also needs to be replaced regularly. If the cabin air filter is not replaced for a long time, it will affect the performance of the car's air conditioning and the health of the passengers. When using the car, it is necessary to replace the cabin air filter on time. Generally, cars require the cabin air filter to be replaced every 10,000 kilometers. The body dimensions of the BJ80 are 4765 mm in length, 1955 mm in width, and 2005 mm in height, with a wheelbase of 2800 mm.

1

Share

What is the fuel consumption of the Lincoln Nautilus?

There are a total of 6 models of the Lincoln Nautilus currently on sale. Among them, the 2021 2.0T Front-Wheel Drive Premium model, equipped with a 245 horsepower engine, has an NEDC fuel consumption of 8.1L per 100 kilometers. The 2021 2.0T All-Wheel Drive Reserve, California Coast Limited Edition, and Reserve Plus models, also equipped with a 245 horsepower engine, have an NEDC fuel consumption of 8.7L per 100 kilometers. The 2021 2.7T All-Wheel Drive Presidential and Black Label models, equipped with a 322 horsepower engine, have an NEDC fuel consumption of 9.6L per 100 kilometers. Many factors affect fuel consumption, but the decisive factor is the powertrain configuration. The Lincoln Nautilus is equipped with two high-performance engines: a 2.0T four-cylinder turbocharged engine and a 2.7T six-cylinder twin-turbocharged engine, delivering strong performance. The transmission is matched with either an 8-speed automatic or an 8-speed automatic manual transmission. The engine start-stop function of the Nautilus also significantly contributes to fuel economy. The battery has sufficient capacity to keep the engine in a stopped state during prolonged stops at traffic lights. The fuel tank capacity of the Lincoln Nautilus is 70L. The distance each model can travel on a full tank of fuel is as follows: 2021 2.0T Front-Wheel Drive Premium model: 70/8.1*100 = 864km. 2021 2.0T All-Wheel Drive Reserve, California Coast Limited Edition, and Reserve Plus models: 70/8.7*100 = 804km. 2021 2.7T All-Wheel Drive Presidential and Black Label models: 70/9.6*100 = 729km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel because larger displacements typically produce more power, requiring more gasoline to burn. Heavier cars also consume more fuel due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine control unit may use higher RPMs to warm up the engine, further increasing fuel consumption.

18

1

Share

What are the body dimensions of the ix35?

ix35 body dimensions: length 4435 mm, width 1850 mm, height 1680 mm, wheelbase 2640 mm. The ix35 offers two powertrain options: a 1.4T turbocharged engine and a 2.0L naturally aspirated engine. The 1.4T engine delivers a maximum power of 103 kW and a maximum torque of 242 Nm, while the 2.0L engine produces a maximum power of 118 kW and a maximum torque of 193 Nm. All ix35 models come standard with a rear spoiler, halogen headlights, and a full-size spare tire. The panoramic sunroof is only available on the Premium version, and manual transmission models do not have a sunroof.

7

3

Share

What is the fuel tank capacity of the Volvo XC60 in liters?

Can 92 and 95 gasoline be mixed?

What transmission is used in the BJ80?

How many cylinders does the BJ80 engine have?

Where is the cabin air filter of the BJ80 located?

What is the fuel consumption of the Lincoln Nautilus?

What are the body dimensions of the ix35?

How many liters of oil should be added to a BMW X1?

Does BMW have a spare tire?

How many liters of transmission oil does the Elantra require?

What is the ground clearance of the BJ80?