What is the fuel tank capacity of the Volkswagen Teramont 380?

1 Answers
Marilyn
07/30/25 5:48am
The Volkswagen Teramont 380 currently has 3 available models, all with a fuel tank capacity of 70 liters. The vehicle is equipped with a 2.0-liter turbocharged engine and a 7-speed wet dual-clutch transmission (DCT) across all variants, with all models featuring front-engine, four-wheel drive. Among vehicles in the same class, the Audi Q3 2022 model has a fuel tank capacity of 60 liters, the Ford Explorer 2020 model has a 73-liter tank, and the BMW X1 2022 model has a 61-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, with additional space remaining from the safe fill level to the tank opening. This space is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel volume may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel.
Was this review help?
6
4
Share
More Forum Discussions

How to eliminate noise in Tiguan?

Methods to eliminate noise in Tiguan are as follows: 1. To reduce engine noise, attach sound-absorbing materials under the hood. 2. To reduce wind noise, install sealing strips or perform door sound insulation. 3. To reduce tire noise, replace with comfort-oriented tires. Details are as follows: 1. Engine noise is generated and transmitted into the cabin through the front fenders, hood, firewall, and exhaust pipe as the engine speed varies. Therefore, vibration damping and sealing these areas can effectively control and reduce engine compartment noise. 2. Wind noise occurs during vehicle movement due to friction between rapidly flowing air and the car body. It enters the cabin through door gaps, so only by enhancing the vehicle's tightness and sound insulation can it be reduced. 3. Tire noise generally consists of three components: air noise from airflow in tire tread gaps and surrounding air disturbance, vibration noise from the tire body and tread patterns (particularly noticeable as road noise and uneven surface noise), and amplified resonance noise formed by friction/impact between tread and ground (especially on bumpy roads) combined with vibrations from components like fenders and mudguards.
14
3
Share

How to Adjust the Headlight Height of Audi A5?

Audi A5 headlight height adjustment method is as follows: 1. Open the hood of the Audi A5. 2. In the engine compartment, look at the rear of the headlight, there is a hexagon screw from top to bottom to adjust the height of the light. 3. Then open the low beam cover, there is a flat black plastic adjustment screw near the fender to adjust the left and right angle. Relevant information is as follows: 1. Low beam and high beam are called car headlights. As long as the light switch is turned to the low beam position, the low beam can be lit. 2. The use of high beam is generally by pushing forward or inward. Pushing forward will keep the high beam on. Pushing inward once will make the high and low beams flash. 3. When using high beam, if you encounter a car meeting, you must turn off the high beam and wait until the meeting is over before turning on the high beam. This is to avoid your high beam dazzling the other driver's vision and causing an accident.
17
5
Share

What are the models in the Toyota series?

Toyota series models are as follows: 1. FAW Toyota: Crown, Reiz, Land Cruiser, Prado, Corolla, Corolla EX, Vios, Coaster, RAV4. 2. GAC Toyota: Camry, Yaris, Highlander. 3. International models: Camry, Avalon, Hilux, Hiace, Previa, Prius, Land Cruiser. 4. Lexus China Edition: LS series, ES series, IS series, RX series, GS series, LX series. Additional information: Toyota Motor Corporation, abbreviated as TOYOTA, is a Japanese automotive manufacturer headquartered in Toyota City, Aichi Prefecture and Bunkyo, Tokyo, Japan. As part of the Mitsui zaibatsu, Toyota sold 9.73 million vehicles in 2012 and projected production of 10.1 million vehicles in 2013, becoming the first automaker to achieve annual production exceeding 10 million units. Toyota is also the parent company of Lexus and Subaru brands, and the largest shareholder of Fuji Heavy Industries.
3
4
Share

What are the dimensions of the Haval H5?

Haval H5 dimensions: The length, width, and height are 4645x1800x1785mm respectively, with a wheelbase of 2700mm and a minimum ground clearance of 225mm. Below is a related introduction to the Haval H5: 1. Body dimensions: The length, width, and height of this vehicle are 4645*1800*1775mm, with a wheelbase of 2700mm. 2. The Haval H5 is a compact SUV launched by Haval Motors. As a compact SUV, this car performs excellently in terms of space. 3. The new model features a more sporty appearance, with an extended wheelbase that enhances the interior space. The front face adopts a new hexagonal grille in the family style, decorated with horizontal chrome accents. The headlights on both sides of the front face also feature a new wing-shaped design, integrated with LED daytime running lights, giving the front face a higher recognition. 4. Side view: The side of this car features a three-dimensional waistline that extends from the front fender to the rear, visually elongating the body. The extended wheelbase also provides a more comfortable space.
9
3
Share

Does the new Bora have front and rear anti-collision beams?

The new Bora does not have a rear anti-collision steel beam. Here is more information about the new Bora: 1. The anti-collision steel beam is mainly designed to protect the vehicle's frame in the event of a low-speed collision, preventing damage to the vehicle's frame, as damage to the body frame can make the car almost impossible to repair. The anti-collision steel beam provides a protective buffer for the car. The new generation Bora, on one hand, adopts the MQB platform, which gives the car a larger body size, making it look more spacious and grand. On the other hand, the redesigned headlight clusters and body lines make the character of the new generation Bora more straightforward. The front face and rear end have a more pronounced sense of layering, creating a flat visual effect, and the waistline design is sharp and dynamic. 2. The interior design of the new generation Bora swaps the positions of the air vents and the central control screen, making the division of functional areas clearer. It maintains a homey style, still familiar, but the multi-layered decorative panels significantly enhance the interior quality. Although the dashboard and decorative panels mostly use plastic materials, the fine craftsmanship still delivers a good visual effect.
1
0
Share

What Causes the Engine RPM Needle to Fluctuate Up and Down?

Engine RPM needle fluctuating up and down can be caused by issues such as charging circuit faults, throttle body problems, PCV valve malfunctions, and engine carbon buildup. Charging circuit fault: Charging circuit issues may result from alternator failure, battery voltage sensor malfunction, or loose battery terminal connections. During vehicle operation, the alternator needs to charge the battery. When the battery fails to charge or receives insufficient charge, the engine ECU increases engine RPM to enable the alternator to charge the battery, causing the tachometer needle to fluctuate during driving. Throttle body fault: Throttle body problems may involve throttle position sensor failure or throttle control motor malfunction. The throttle position sensor detects the throttle opening to control fuel injection volume, while the throttle control motor adjusts the throttle angle according to pedal position. When these components fail, engine air intake changes, resulting in tachometer fluctuations during driving. PCV valve malfunction: The PCV (Positive Crankcase Ventilation) valve recirculates blow-by gases from the cylinders back into the intake manifold for combustion. The charcoal canister purge valve directs fuel vapor from the fuel tank to the intake manifold. When these valves malfunction, the actual fuel mixture entering the cylinders deviates from ECU settings, causing RPM fluctuations. Engine carbon buildup: Carbon deposits in the throttle body and combustion chambers significantly affect air-fuel mixture combustion. Throttle body carbon buildup restricts air intake, while combustion chamber deposits interfere with fuel injection and ignition, potentially causing pre-ignition or detonation. These conditions lead to unstable engine RPM.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.