What is the fuel tank capacity of the Volkswagen Sagitar?

1 Answers
LaSamuel
07/29/25 8:58pm
Volkswagen Sagitar fuel tank capacity: The fuel tank capacity of the new generation Volkswagen Sagitar is 50L, while the older model has a capacity of 55L. The size of the fuel tank directly determines the vehicle's driving range. In Volkswagen cars, the fuel tank is generally located at the right rear of the vehicle. The opening method is quite unique—there is no internal switch to open the fuel tank cover. Simply press the rear end of the fuel tank cover to open it. The Volkswagen Sagitar measures 4544mm in length, 1760mm in width, and 1461mm in height, with a wheelbase of 2578mm. The new Sagitar series is equipped with three types of engines: 1.4TSI, 1.8TSI, and a 1.6L naturally aspirated engine. The 1.6L naturally aspirated 4-cylinder engine is very mature in technology, featuring 4 valves per cylinder, which improves intake and exhaust compared to the previous generation's 2 valves per cylinder. This enhances both low-speed torque and high-speed power.
Was this review help?
4
3
Share
More Forum Discussions

What happens if engine oil is changed late?

Delayed oil change can lead to: 1. Deposited impurities corroding internal engine components; 2. Increased sludge formation, making it difficult for the oil pump to maintain pressure and potentially causing engine failure; 3. Oil degradation and ineffectiveness, reducing its lubrication and protection capabilities and accelerating component wear; 4. Oil thinning, losing its sealing properties and leading to gas leakage; 5. Reduced cooling performance. Engine oil, also known as motor lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, and shock absorption. It consists of base oil and additives, with the base oil being the primary component that determines the fundamental properties of the lubricant.
4
2
Share

Where is the water temperature gauge on the Geely Emgrand?

Geely Emgrand water temperature gauge is located on the dashboard. When the needle is in the white zone, it indicates normal temperature, while reaching the red zone means the water temperature is too high. The dimensions of the Geely Emgrand are: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm and a fuel tank capacity of 50 liters. The Geely Emgrand is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109hp and a maximum power output of 80kW at 6000rpm, with peak torque achieved at 4400rpm. It is paired with a 5-speed manual transmission.
20
2
Share

What does ESC in cars refer to?

Automotive ESC is a new type of active safety system in vehicles, fully known as Electronic Stability Control, which belongs to the driving assistance system of a car. The automotive ESC system is a further extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS). It mainly controls the longitudinal and lateral stability of the vehicle to ensure that the vehicle moves according to the driver's intentions. At the same time, the system works in coordination with the engine ECU. When the drive wheels slip, by comparing the speed of each wheel, the electronic system determines whether the drive wheels are slipping and immediately reduces the throttle intake automatically, lowers the engine speed to reduce power output, and applies braking to the slipping drive wheels. ESC can be turned off in special road conditions or when the vehicle is stuck in mud, which helps the car get out of trouble as soon as possible. However, the ESC system should not be turned off during normal driving, as it may lead to loss of control and other phenomena, which are not conducive to safe driving.
13
2
Share

What are the functions of the clutch?

The functions of the clutch are: 1. Ensure smooth starting of the vehicle; 2. During vehicle operation, when using different transmission gears to adapt to constantly changing driving conditions, the clutch can temporarily separate the engine from the transmission, preventing the meshed force-transmitting gears in the transmission from being difficult to disengage due to unrelieved load and high pressure between the meshing tooth surfaces. The clutch is a device that transmits the vehicle engine power to the axle in an on-off manner, installed between the engine and the transmission, and is the assembly component in the vehicle drivetrain that directly connects with the engine. The clutch is located within the flywheel housing between the engine and the transmission, and the clutch assembly is secured to the rear plane of the flywheel with screws.
11
3
Share

What Causes the Squeaking Noise When Braking at Low Speeds?

Low-speed brake squeaking can be caused by: 1. Excessive wear of the brake disc and brake pads; 2. Improper installation of the brake pads; 3. Foreign objects on the brake pads or brake disc; 4. Poor caliper reset leading to prolonged friction between the disc and pads. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, or other transportation tools and machinery. Solutions for low-speed brake squeaking include: 1. Applying butter or specialized lubricant to the connection between the brake pads and the brake caliper; 2. Regularly inspecting and replacing the brake disc and brake pads; 3. Reinstalling the brake pads.
12
3
Share

Does the Peugeot 5008 Have Independent Suspension?

The front suspension of the Peugeot 5008 is an independent suspension, while the rear suspension is not. The Peugeot 5008 is a mid-sized SUV under the Peugeot brand. This vehicle features a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. The suspension connects the car body to the wheels, and without it, the car cannot operate normally. The structure and tuning of the suspension significantly impact the car's handling and comfort. The MacPherson suspension is the most common type of independent suspension. It has a relatively simple structure and a compact size, occupying minimal space. The MacPherson suspension consists of only an L-shaped control arm, which does not take up engine compartment space. Therefore, most front-transverse engine cars use the MacPherson suspension. The torsion beam suspension is a simple-structured non-independent suspension. It also occupies less space. Using a torsion beam suspension at the rear can expand the rear seating space and trunk space, which is particularly important for family-oriented SUV models.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.