What is the fuel tank capacity of the Volkswagen Lavida XR?

1 Answers
Lucian
07/29/25 11:02pm
The fuel tank capacity of the Lavida XR 2017 1.6L Manual Fashion Edition is 55L. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. In the same class, the Octavia 2021 1.5L Manual Comfort Edition has a fuel tank capacity of 51L, while the Golf Sportsvan 2020 200TSI Automatic Curiosity Pure Edition has a fuel tank capacity of 50L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
4
1
Share
More Forum Discussions

What Causes Water Leakage Under the Car When the Air Conditioning is On?

Here are the specific reasons for water leakage under the car when the air conditioning is on: 1. Evaporator drainage: Because the car's air conditioning system is equipped with an evaporator inside the dashboard, when the air conditioning is turned on (A/C button ON), the surface temperature of the evaporator becomes very low. The moisture in the hot air inside the car will condense on the surface of the evaporator's heat-absorbing fins, and the water droplets are collected by the plastic housing of the evaporator and discharged out of the car through a pipe. 2. Compressor condensation formation: Sometimes, the exterior of the compressor (low-pressure area) installed in the engine compartment can condense moisture from the air, causing it to drip onto the ground. 3. Lack of insulation foam wrapping: If the low-pressure pipes are not wrapped with insulation foam, the surface of the pipes can easily condense moisture from the air, and water droplets often gather and drip from the lowest point of the pipes.
15
4
Share

Can the test location for Subject 4 be changed?

In principle, Subject 4 cannot be taken at a different test center; you must take the exam at the location where you registered. Below are the precautions for the Subject 4 exam: 1. Verify information: After sitting down, first verify the examinee information. If it does not match your details, check if it is your assigned seat. If not, find your correct seat. If the seat is correct but the information is wrong, report it immediately. 2. Follow test center rules: During the Subject 4 exam, adhere to test center discipline. If you make loud noises during the waiting period, you will be expelled and disqualified from taking the exam that day. 3. Follow instructions: Obey the staff's arrangements. If you have questions, raise your hand and ask the examiner—don't be afraid. 4. Adjust the camera position: Adjust the camera to focus on the upper third of your face and chest. If your face is not within the monitoring range, your score will be invalidated.
5
1
Share

How Often Should the Clutch Plates in an AT Automatic Transmission Be Replaced?

Generally, it is recommended to replace them every 100,000 kilometers. Below is an introduction to clutch-related information: 1. Whether replacement is needed: It varies from person to person, mainly depending on driving habits. It can also be said that if the car still performs very powerfully, the clutch plates may not need replacement. Of course, sometimes an experienced mechanic is needed to make this judgment, or the driver can also determine based on their daily driving experience. 2. Precautions: When driving normally, do not rest your foot on the clutch pedal. Avoid using the half-clutch technique while driving. In special circumstances where half-clutch is necessary, minimize the duration to prevent burning out the clutch friction plates. Due to advancements in automotive manufacturing technology, the double-clutching technique is generally no longer used in passenger cars or some models with synchronized transmissions. However, in special situations, such as when quickly downshifting on a downhill or in muddy, icy, or snowy conditions, it may still be necessary.
6
3
Share

Is Car Film Applied on the Inside or Outside?

Car film is applied on the inside. Applying it on the inner side avoids exposure to wind and rain, ensuring the film is not subject to significant external interference during use. Since the film is adhesive and not exposed to weathering, it adheres more firmly and remains unaffected during use. If applied on the outside, it could be damaged by windshield wipers or soaked by rainwater, leading to bubbling of the window film. Benefits of car film: It blocks ultraviolet rays, reduces heat, and prevents injuries caused by sudden glass shattering. Additionally, due to the one-way transparency feature of solar film, it helps protect personal privacy. Moreover, it can reduce air conditioning energy consumption, enhance aesthetics, and to some extent, improve fuel efficiency. Precautions for applying film: Avoid washing the car within three days after applying the film to prevent moisture from causing the film to peel off. After the film is applied, do not roll down the side windows for 24 hours in summer and 48-72 hours in winter.
7
4
Share

Can You Make a U-Turn at a Highway Entrance?

You cannot make a U-turn at the entrance to a highway because U-turns are prohibited on highways. However, if you have not yet entered the highway and there is a designated U-turn point, you may make a U-turn without incurring penalties or fines. Prohibited behaviors on highways: Reversing, driving in the opposite direction, making a U-turn across the central divider, or stopping within a lane; overtaking on ramps, acceleration lanes, or deceleration lanes; straddling or driving on lane markings or shoulders; driving or parking in the emergency lane unless in an emergency; test driving or learning to drive a motor vehicle. Other highway regulations: When entering a highway from a ramp, vehicles must turn on the left turn signal and merge into the lane without obstructing the normal flow of traffic already on the highway. When exiting a highway, vehicles must turn on the right turn signal, enter the deceleration lane, reduce speed, and then exit.
9
0
Share

Is it possible to shift gears without depressing the clutch?

It is possible to shift gears without depressing the clutch, but safety precautions must be observed. Below is detailed information about automotive clutches: 1. Overview: Vehicle safety is primarily categorized into active safety and passive safety. Active safety refers to the ability to control the vehicle as freely as possible. Whether braking or accelerating in a straight line or steering left and right, operations should be as smooth as possible to avoid deviating from the intended path and without compromising the driver's visibility or comfort. 2. Additional Information: Automotive safety technology covers an increasingly broad and detailed range, evolving towards integration, intelligence, systematization, and comprehensive involvement. Strictly controlling speed during nighttime driving is a fundamental measure to ensure safety.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.