What is the fuel tank capacity of the Volkswagen Jetta in liters?

1 Answers
DeMia
07/25/25 2:53am
The fuel tank capacity of the Jetta 2019 Dream Edition 1.5L Manual Fashion model is 55L. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension type is MacPherson independent suspension, and the rear suspension type is compound torsion beam non-independent suspension. In the same class, the fuel tank capacity of the Elantra 2021 1.5L CVT GLS Leading Edition is 47L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the automobile manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
Was this review help?
7
3
Share
More Forum Discussions

Is Car Coating Useful?

Car coating is extremely useful. Below is a detailed introduction about car coating: 1. Overview: Paint coating technology is the latest generation of paint protection technology in the world. It is generally recommended to perform a car paint coating every 1 year or so. 2. Chemical Definition: Only inorganic coatings are the coating layers that cover the surface of the car and will not be oxidized and disappear due to external factors such as ultraviolet rays and acid rain. Under normal use of the vehicle, a single application can protect the paint for up to 1 year, which is why it is called car coating. 3. Function: After car coating, the paint surface has stronger oxidation resistance, wear resistance, corrosion resistance, and high temperature resistance. The coating layer is more evenly and finely distributed, with higher hardness and longer-lasting brightness. It turns the paint into a continuous surface, increasing the overall paint density.
10
3
Share

BMW X6 Engine Abnormal Power Loss?

BMW X6 engine power loss can be attributed to carbon buildup issues, fuel system problems, intake system issues, and engine overheating. Carbon buildup issues include cylinder carbon deposits, throttle valve carbon deposits, spark plug carbon deposits, and intake carbon deposits, all of which are directly related to the engine's power output. Fuel system problems: Using incompatible fuel grades can lead to reduced engine power output and diminished performance. Alternatively, a blocked fuel tank vent can cause a lean air-fuel mixture, resulting in weak engine acceleration. Intake system issues: Insufficient air intake will cause an overly rich air-fuel mixture, leading to engine power loss. For vehicles equipped with turbochargers, a malfunction in the turbocharging system can also result in reduced engine power or sluggish performance. Engine overheating: Insufficient engine oil, low coolant levels, or malfunctioning engine cooling systems can increase engine load, leading to poor heat dissipation. Solutions for engine power loss: Promptly clean the engine to remove carbon deposits; replace the air filter or clean the catalytic converter; purge air from the fuel system and drain all fuel from the tank and fuel filter. Refill the tank with the correct fuel grade and quality in a 4:1 ratio, and use a hand pump and bleed screw to remove all air; seek professional repair services at a specialized workshop or 4S store. Avoid DIY repairs without proper knowledge to prevent further damage to the vehicle. Engine maintenance methods: Use high-quality engine oil; use qualified coolant; regularly clean radiator scale; periodically remove carbon deposits from the vehicle; replace the three filters on time; maintain reasonable engine RPM. The car engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental friendliness. The engine consists of the crankshaft-connecting rod mechanism and valve train; fuel supply system; cooling system; lubrication system; ignition system; and starting system.
20
0
Share

Why is Third Gear Considered the Universal Gear?

Typically, when driving in urban areas, the speed ranges from 40 to 60 kilometers per hour. At this speed, a manual transmission car can consistently use third gear, hence why it's referred to as the universal gear. Additionally, during driving, this gear can cover most speed ranges, allowing almost the entire journey to be completed in third gear. Sometimes, even at speeds up to 70 km/h, third gear can be used for short periods, avoiding the need for frequent gear changes. Essentially, third gear can handle almost all situations. The differences between manual and automatic transmissions are as follows: 1. Transmission: Manual transmission vehicles differ from automatics in that gear changes require manual intervention, whereas automatics can shift gears based on speed automatically. Specifically, each gear in a manual transmission corresponds to a certain speed range, and adhering to this is ideal. However, in daily driving, frequent gear changes may not be necessary, so many drivers opt to stay in a middle gear, which explains why third gear is considered universal. 2. Speed Ranges for Each Gear: Generally, first gear is used for speeds below 10 km/h, which is also the starting gear. When speeds range between 10 to 20 km/h, second gear is appropriate. For speeds between 20 to 40 km/h, third gear is recommended. Speeds from 40 to 60 km/h can be handled in fourth gear, and anything beyond that can use fifth gear. Hence, on highways, manual transmissions are typically shifted to fifth gear. On regular roads, where speeds fluctuate less drastically, many drivers prefer to stay in third gear to avoid the hassle of frequent shifting. 3. Impact of High RPM on the Engine: Continuously using third gear at higher speeds will cause the tachometer to rise. It's important to monitor whether the RPM enters the red zone, in which case upshifting is necessary. In practice, even at speeds above 60 km/h, the tachometer usually doesn't reach the red zone, so the impact on the engine is minimal. However, if unusual noises are heard, it's advisable to shift to a higher gear.
19
3
Share

What is the fuel consumption of the hybrid Honda CR-V?

Honda CR-V's fuel consumption per 100 kilometers is 6.4 liters. Methods to reduce fuel consumption are as follows: Strive to reduce vehicle weight: The relationship between vehicle weight and fuel consumption is directly proportional. It is said that for every 10% reduction in vehicle weight, fuel consumption will correspondingly decrease by several percentage points. Improve vehicle aerodynamics: The fuel consumption will significantly decrease with a lower drag coefficient. The relationship between these two is also directly proportional. Maximize engine thermal efficiency: Currently, the thermal efficiency of general gasoline engines (i.e., the proportion of fuel converted into useful work) reaches over 30%, while diesel engines have exceeded 40%. This is the main reason why diesel engines have lower fuel consumption than gasoline engines.
2
4
Share

Why is there hot air coming out when the car's air conditioning is not turned on?

The reason for the hot air is that the vehicle is in the external circulation mode. When the car's air conditioning system is set to external circulation, outside air enters the cabin with the airflow during driving, creating natural ventilation. Below are some common issues with car air conditioning: 1. The air conditioning is set to heating but the warm air is not hot: If the engine coolant temperature is normal (low engine coolant temperature will definitely result in no warm air), this could be due to issues like coolant circulation failure, damaged water pump impeller, or clogged air filter. 2. Different temperatures on both sides of the air conditioning: This might be caused by incorrect settings in the dual-zone air conditioning. 3. Warm air with a burnt smell: Possible causes include aging air conditioning wiring, excessively high air conditioning temperature settings, or blocked air vents.
5
0
Share

Is It Normal for Newly Replaced Headlight Assembly to Fog Up?

It is not normal, indicating poor sealing of the headlight, allowing air to enter the interior. Below is an extended introduction about automotive headlights: 1. Function: The role of automotive headlights is to provide illumination for nighttime driving. Automotive headlights are also referred to as front headlights or LED daytime running lights. As the 'eyes' of a car, they not only relate to the owner's external image but are also closely linked to safe driving at night or in adverse weather conditions. 2. Types: (1) By purpose: Automotive lights can be divided into two categories based on their purpose: illumination and auxiliary. Among them, only the front headlights and some fog lights equipped on certain vehicles serve an illumination function, while the rest are auxiliary lights. (2) By category: Currently, there are four types of automotive headlights. They are laser headlights, LED automotive headlights, xenon headlights, and halogen lights.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.