What is the fuel tank capacity of the Vision X1?

2 Answers
MarianaDella
07/24/25 7:02am
The fuel tank capacity of the Vision X1 is 35 liters, which is the officially announced data. Owners who have purchased the Vision X1 can also check this information on the vehicle's configuration sheet. The Vision X1 uses 92-octane fuel, with a fuel consumption of 5.1 to 5.9L per 100 kilometers. A full tank can cover a distance of 593 to 686 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
17
5
Share
MacAbigail
08/11/25 2:46am
The standard fuel tank capacity of the Vision X1 is 33 liters. This is quite reasonable for a compact SUV, which I also paid attention to when purchasing the car. The fuel tank size is designed to match the chassis layout, as a larger one would encroach on rear passenger space. Although it can't compare with the 40-plus liter tanks of mid-size cars, combined with its 5.1L/100km fuel consumption, a full tank can last over 600 kilometers on long trips. It's advisable not to frequently wait until the fuel warning light comes on before refueling, as the fuel pump relies on gasoline for cooling, and maintaining too low a level can shorten its lifespan.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Where is the VIN number of Wuling Hongguang?

Wuling Hongguang's VIN number is located in the engine compartment, on the passenger side, and it is also recorded on the vehicle's registration certificate. The VIN is a combination of 17 letters and digits, which ensures that no two vehicles of the same model will have the same number within 30 years. It contains information about the vehicle's manufacturer, year of production, model, body type and code, engine code, and assembly location. The Wuling Hongguang is a compact multi-purpose business vehicle produced by SAIC-GM-Wuling. The dimensions of this vehicle are 4305mm in length, 1680mm in width, and 1770mm in height, with a wheelbase of 2720mm.
15
4
Share

What are the length, width, and height of the Geely Jiaji?

The length, width, and height of the Geely Jiaji are 4706mm, 1909mm, and 1690mm respectively, with a wheelbase of 2805mm. The Geely Jiaji is Geely's first MPV model, positioned as a high-end premium family MPV, designed for young families, marking a new product line for Geely. The front of the Jiaji features the brand's signature cosmic ripple upper grille and floating headlight design, with star-chain-inspired lattice detailing inside. A V-shaped chrome trim extends into the headlights, complemented by a four-line LED daytime running light setup, giving the overall design a very refined look. The side profile showcases sharp character lines paired with a lower skirt line, exuding a strong sense of dynamism.
12
2
Share

How often should a vehicle be started if it is not used for a long time?

If a vehicle is not used for a long time, it should be started once a week. If idling without driving, it is recommended to idle for ten minutes and then rev the engine for two minutes. When a vehicle is not used for a long time, protective measures should be taken to avoid difficulties in starting the car. For long-term parking, it is advisable to directly disconnect the negative terminal of the battery to reduce power consumption. Protective measures for vehicles not used for a long time: 1. Park the vehicle on a flat surface to avoid tire compression and wear of internal oils, which may cause imbalance and malfunction; 2. If parked for an extended period, remove the vehicle battery to prevent prolonged discharge; 3. If necessary, park the vehicle in a garage to prevent damage to the paint surface.
20
5
Share

Is Soundproofing Necessary for Cars?

Soundproofing is not mandatory for cars. Automotive soundproofing can be categorized into partial and full-vehicle soundproofing. Some vehicles already have decent sound insulation, or only certain areas lack proper insulation. In such cases, full-vehicle soundproofing isn't necessary—targeted soundproofing in specific areas can yield significant improvements. Car noises are classified into low, medium, and high frequencies, and not all noises can be effectively blocked. For instance, engine noise and sheet metal vibrations, which fall under medium-to-high frequencies, can be mitigated with soundproofing. However, noises like tire roar, especially exhaust pipe sounds, which belong to medium-to-low frequencies, are often challenging to block.
14
0
Share

Does uneven tire pressure among four tires affect driving?

Uneven tire pressure among four tires does affect driving. Different tire pressures result in varying rolling resistances for each tire. Particularly, if the tire pressures on both sides of the same axle are unequal, it can easily cause the vehicle to pull to one side while driving. Additionally, it may lead to heavier steering and reduced driving stability. The normal tire pressure range is between 2.2 and 2.5. Excessive tire pressure concentrates the vehicle's weight on the center of the tread, causing rapid wear in that area. Conversely, insufficient tire pressure can lead to uneven contact area, increased wear, higher rolling resistance, and increased fuel consumption. Therefore, maintaining proper tire pressure is crucial for driving safety, tire lifespan, and optimal performance.
17
4
Share

How Often Should a New Car Be Inspected?

New cars have different inspection requirements depending on the vehicle type. For ordinary family cars, new vehicles must undergo an inspection every two years, while passenger transport vehicles must be inspected annually within the first five years. Vehicle inspection is a mandatory test for all motor vehicles that have obtained official license plates and registration certificates. It is similar to an annual safety check-up based on the technical safety requirements for motor vehicle operation. The purpose is to promptly eliminate potential safety hazards, encourage and enhance vehicle maintenance, and reduce the occurrence of traffic accidents. The inspection primarily focuses on the vehicle's safety, including a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.