What is the fuel tank capacity of the Viano in liters?

3 Answers
EmmettFitz
07/29/25 11:31am
The fuel tank capacity of the Viano-2015 3.0L Partner Edition is 75L. It is equipped with a 3.0L naturally aspirated engine and a 5-speed automatic manual transmission (AT). The drivetrain is front-engine, rear-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a semi-trailing arm independent suspension. In the same class, the Mercedes-Benz V-Class-2021 V260 Pilot Edition has a fuel tank capacity of 70L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the automaker is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated fuel tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
16
1
Share
LaClayton
08/13/25 7:24pm
The Viano's fuel tank capacity is 90 liters, and as a long-distance travel enthusiast, I must emphasize how particularly practical this size is. Having driven the Viano for so long, I never worry about refueling on long trips—a full tank can cover 800 to 1,000 kilometers on the highway, which is a huge relief for family vacations or business travel. With an average fuel consumption of around 10 liters per 100 kilometers, a full tank is enough to cover most of the journey. I remember driving from Beijing to Harbin and only needing to refuel once along the way, saving so much time and effort. However, keep in mind that the large body size leads to higher fuel consumption, so it’s advisable to regularly check the fuel tank’s seal to prevent leaks or debris buildup. Maintaining good driving habits can also extend the tank’s lifespan. Overall, the 90-liter capacity is thoughtfully designed, adding significant value to this Mercedes MPV.
Was this review help?
6
4
Share
Expand All
KathrynRose
10/08/25 4:56am
The Viano's 90-liter fuel tank capacity is standard equipment, ranking mid-to-upper level among Mercedes-Benz models. As an automotive enthusiast, I enjoy studying different vehicle characteristics – the Viano's MPV positioning gives it a large fuel tank, making it ideal for passenger and cargo scenarios. Mercedes engineers emphasize safety and convenience, with the 90-liter capacity ensuring sufficient range for both urban commutes and long-distance trips without frequent gas station stops like smaller cars. Compared to competitors like the Honda Odyssey's approximately 70-liter tank, the Viano shows clear advantages, particularly in commercial applications where it reduces refueling downtime. Of course, daily fuel usage requires environmental awareness – avoiding full-throttle acceleration when fully loaded to prevent increased consumption, while route planning maximizes efficiency.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Which parts of the BMW X3 body use aluminum alloy?

BMW X3's hood, front wheel fenders on both sides, and front doors on both sides use aluminum alloy. Below is relevant introduction about BMW X3: 1. The exterior design of BMW X3 also adopts BMW's family style. 2. The interior of BMW X3 follows a technological theme while adding more luxury atmosphere compared to Q5L. The cabin uses extensive silver trim to create a technological feel, excelling in both design and atmosphere creation. 3. BMW X3 comes standard with 12.3-inch full LCD instrument panel and 10.25-inch central control display across all models. 4. BMW X3 offers three power options for its 2.0T engine: low power (25i), standard power (28i), and high power (30i). All models come with 8AT transmission and standard four-wheel drive system.
3
0
Share

What is the particulate filter in the Volkswagen Tayron?

Volkswagen Tayron is equipped with a particulate filter. The 2022 Volkswagen Tayron has a total of 5 models, all of which come with a particulate filter to meet the China VI emission standards. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipe. After passing through its densely arranged bag-type filter, the carbon particles are adsorbed onto the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon particles into harmless carbon dioxide that is then expelled. To check whether the Volkswagen Tayron has a particulate filter, you can use the following three methods: Check the and the to see if there is a particulate filter function. Additionally, you can carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look at the exhaust pipe behind the three-way catalytic converter to see if there is a cylindrical section. If there is, that is the particulate filter.
15
5
Share

What is the actual fuel consumption of the BMW 530?

The actual fuel consumption of the BMW 530 is 9.9L/100km. The 2020 BMW 530 is equipped with a 2.0T L4 turbocharged engine, model B48B20D. Body dimensions: The 2020 BMW 530 has a length of 5087mm, a width of 1868mm, a height of 1500mm, and a wheelbase of 3108mm. Power specifications: The engine has a maximum power output of 185kw, a maximum torque of 350 Nm, a maximum power speed range of 5200 to 6500 rpm, and a maximum torque speed range of 1450 to 4800 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a ZF 8-speed automatic transmission. The top speed is 250 km/h. Suspension: The BMW 530 uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
8
2
Share

What is the fuel tank capacity of the BMW 5 Series?

The fuel tank capacity of the BMW 5 Series is 70 liters. The size of the fuel tank measures a vehicle's ability to carry fuel, and the tank volume determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Below is a partial introduction to the BMW 5 Series: 1. Body dimensions: Taking the BMW 525i as an example, its body dimensions are 4841mm in length, 1846mm in width, and 1468mm in height, with a wheelbase of 2888mm, front track of 1558mm, and rear track of 1582mm. 2. Powertrain: The BMW 525i features a front-engine, rear-wheel-drive layout, with a top speed of 233 km/h, and is powered by an inline six-cylinder, four-valve engine.
8
1
Share

What Causes the Malfunction Indicator Light to Illuminate?

Here are the reasons why the malfunction indicator light may illuminate: 1. Sensor issues: When the coolant temperature, crankshaft position, air flow, intake air temperature, or oxygen sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data; 2. Maintenance problems: Irregular maintenance and poor driving habits can increase the operational burden on the engine; 3. Fuel quality issues: The fuel used in the car has specific octane ratings, and failure to use the required grade can cause engine wear; 4. Poor fuel mixture combustion: This can lead to engine carbon buildup or knocking issues, which are detected by the engine's oxygen sensor; 5. False alarms: These may occur due to minor collisions during driving, tampering with engine connectors, or temporary ECU signal interruptions.
17
3
Share

What is Full-Time Four-Wheel Drive?

Full-time four-wheel drive means that at all times, the vehicle is independently driven by all four wheels. In English, it is abbreviated as "AWD" (All-Wheel Drive) to distinguish it from 2WD (which includes FWD and RWD). Full-time four-wheel drive distributes driving force to all four tires through a flexibly connected central differential, and then via independent differentials on the front and rear axles. Unlike purely mechanical differential locks, the differential in full-time four-wheel drive can be either a viscous coupling or a multi-clutch type, but both allow for a speed difference between the front and rear wheels, as well as between the left and right wheels. Whether a vehicle has full-time four-wheel drive depends entirely on the construction of the transfer case. Below is relevant information: Disadvantages: It only starts transferring power to non-slipping tires after detecting slippage in a particular tire, which means the response can be slower. More importantly, these viscous or electronic differentials cannot completely lock the power distribution at 50:50 like a mechanical differential lock. Because of this, full-time four-wheel drive is often dismissed by hardcore off-road enthusiasts as "fake off-roading," unable to match the capabilities of part-time four-wheel drive in extreme conditions like climbing mountains or fording rivers. Advantages: Theoretically, it is the ideal driving method for vehicles, providing better tire grip, more effortless high-speed cornering, and easier handling, thereby enhancing both safety and performance. Since power is always distributed to all four wheels, when one wheel begins to slip, the system automatically intervenes to redistribute power to ensure optimal traction at all times. This system offers significant handling advantages on slippery surfaces. As a result, more and more SUVs and sedans adopt full-time four-wheel drive not just for off-roading but for the stability and active safety it provides, especially in high-performance cars. Section: Excellence and Safety
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.