What is the fuel tank capacity of the Vezel in liters?

Which has a longer wheelbase, the Avalon or the Camry?

The Avalon has a longer wheelbase than the Camry. The Avalon's wheelbase is 2870 mm, while the Camry's wheelbase is 2825 mm. The Avalon is a mid-size sedan under Toyota. Taking the 2021 Toyota Avalon Luxury Edition as an example, its body dimensions are: length 4975 mm, width 1850 mm, and height 1450 mm. The 2021 Toyota Avalon Luxury Edition is equipped with a 2.5L naturally aspirated engine, with a maximum power of 154 kW and a maximum power speed of 6600 rpm. The Camry is a mid-size sedan under GAC Toyota. Taking the 2019 Camry Facelift 2.0E Elite Edition as an example, its body dimensions are: length 4885 mm, width 1840 mm, and height 1455 mm. The 2019 Camry Facelift 2.0E Elite Edition is equipped with a 2.0L naturally aspirated inline 4-cylinder engine, with a maximum power of 131 kW and a maximum power speed of 6600 rpm.

12

5

Share

What is the tire model of the Sylphy?

The tire models for the Sylphy are 195/60R16, 205/50R17, and 185/65R15. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. The Sylphy is a compact car. Taking the 2021 Sylphy as an example, its body structure is a 4-door, 5-seater sedan with body dimensions of 4631 mm in length, 1760 mm in width, and 1503 mm in height, with a wheelbase of 2700 mm. The 2021 Sylphy is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 155 N·m, paired with a 5-speed manual transmission.

6

0

Share

Can 0w30 engine oil be used in summer?

0w30 engine oil can be used in summer. The smaller the number before W, the better the fluidity of the lubricating oil at low temperatures, making it easier to start the car; the larger the number after W, the better the viscosity of the oil in high-temperature environments and the higher the strength of the oil film formed. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. The steps for changing engine oil are: 1. Lift the car, remove the protective plate, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the oil drain plug after draining, and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate, lower the car, and use a funnel to add engine oil to the standard position at the oil filler port.

6

3

Share

What are the reasons for the ABS warning light to intermittently turn on and off?

ABS warning light can indicate various conditions, each with different causes and solutions, as detailed below: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Inspect wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently turns on but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). Condition 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body wiring connector; ABS control unit malfunction. Solution: Loosen and retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR control unit. Condition 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, often found on the label near the fuel tank cap. Condition 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage down fully, then release the brake pedal to complete self-setting; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

3

2

Share

What are the body dimensions of the ninth-generation Honda Accord?

The body dimensions of the ninth-generation Honda Accord are: length 4930 mm, width 1845 mm, height 1470 mm, with a wheelbase of 2775 mm. The ninth-generation Honda Accord has a fuel tank capacity of 65 liters, a trunk capacity of 512 liters, and a curb weight of 1495 kilograms. The ninth-generation Honda Accord is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, with a maximum power of 114 kW at 6500 rpm, a maximum torque of 190 Nm at 4300 rpm. It uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.

11

3

Share

What are the methods to enhance car remote key signals?

Methods to enhance car remote key signals include: 1. Increasing the antenna length; 2. Boosting the transmission power. The functions of a car remote key are: 1. Long-pressing the lock button after turning off the engine can close the windows; 2. Pressing the horn button on the key can alert the owner to the vehicle's location; 3. Long-pressing the trunk unlock button can automatically open it; 4. Pressing the unlock button once opens only the driver's door, while pressing it twice opens all doors. Maintenance methods for car remote keys are: 1. Avoid frequently placing them with metal objects; 2. Do not store spare keys in the car door; 3. Prevent smart keys from dropping or colliding; 4. Avoid placing keys near electronic devices.

12

4

Share

What is the fuel tank capacity of the Vezel in liters?

Which has a longer wheelbase, the Avalon or the Camry?

What is the tire model of the Sylphy?

Can 0w30 engine oil be used in summer?

What are the reasons for the ABS warning light to intermittently turn on and off?

What are the body dimensions of the ninth-generation Honda Accord?

What are the methods to enhance car remote key signals?

What are the Mercedes-Benz Big G and Little G?

How many liters of transmission oil should be added to the BMW X1?

Where is the cabin air filter located in the BMW X3?

What car has a snake-like logo?