What is the fuel tank capacity of the Trumpchi GS3 in liters?

2 Answers
CollinDella
07/29/25 8:18am
Trumpchi GS3's fuel tank capacity is 50 liters. This data is officially released, and owners who have purchased the Trumpchi GS3 can also check it on the vehicle's configuration sheet. The Trumpchi GS3 uses 92-octane fuel, with a fuel consumption of 5.9-6.5L per 100 kilometers. A full tank can cover a distance of 769-847km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The dashboard fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
Was this review help?
17
5
Share
DiSophia
08/12/25 11:28am
I've been driving the GAC GS3 for over three years now. The car has a 45-liter fuel tank, and a full tank can last for over 500 kilometers. For my daily commute, I basically don't need to refuel for a week. As an experienced driver, I find this capacity very practical for a compact SUV, especially when driving on highways—it gives me peace of mind. The daily driving fuel consumption is around 7 liters. Although the tank isn't very large, its design is reasonable, helping to avoid fuel sedimentation issues. I recommend filling up to about 80% capacity each time to protect the fuel pump. For those who frequently take long trips, checking the fuel tank cap seal for tightness adds an extra layer of safety.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to Replace the Battery in a Mercedes-Benz R350 Key?

To replace the battery in a Mercedes-Benz R350 key, follow these steps: 1. Remove the mechanical key from the smart key, then locate a small hole. 2. Use the mechanical key to gently pry open the hole, which will release the back cover of the smart key. Once opened, you can see the battery. Remove the old battery and install the new one, ensuring the positive side of the battery faces the metal contact strip. The Mercedes-Benz R350 is a business vehicle with dimensions of 5157mm in length, 1922mm in width, and 1661mm in height, with a wheelbase of 3215mm. It is powered by an M272KE35 engine, delivering a maximum power of 200KW and a maximum torque of 350NM. The vehicle is available in three colors: champagne gold, silver gray, and black.
3
1
Share

What are the reasons for the parking air conditioner not cooling?

The reason for the parking air conditioner not cooling is that the air conditioner radiator is too dirty. The following is the relevant introduction about car air conditioner maintenance: 1. Turn off the air conditioner when the engine is under high load: When the engine is under high load, the air conditioner should be temporarily turned off. Otherwise, if the engine overheats, it will not only affect the driving of the car but also the use of the air conditioner. 2. Keep the air conditioner clean: As time goes by, the owner should regularly replace the air filter element to maintain the normal operation of the internal parts of the air conditioner. At the same time, do not stack items near the air intake to avoid blocking the air intake, which will hinder the air circulation of the air conditioning system.
5
1
Share

Symptoms of a Faulty Idle Motor?

The manifestations of a damaged idle motor are as follows: 1. Irregular idle speed. One of the most common symptoms associated with a problematic air control valve is irregular idle speed. The idle air control valve is programmed to regulate and maintain the engine's idle speed at a constant rate. If the valve malfunctions or has any issues, it may cause the idle speed to fluctuate. This can result in abnormally high or low idle speeds, or in some cases, repeatedly rising and falling idle speeds. 2. Engine stalling. Another more severe symptom of idle control valve issues is engine stalling. If the idle control valve fails completely, it may leave the vehicle without an air source to maintain proper idling. This can cause the engine to stall while running, and in some cases, may prevent the engine from idling at all, causing it to stall immediately after starting.
10
0
Share

What brand is the Dodge Journey engine?

Dodge Journey engine is dohcdvvt and pentastar brand, the engine is a machine that can convert form into mechanical energy. Taking the 2016 two-wheel drive travel version of the Dodge Journey as an example, its body length, width and height are: 4910mm, 1878mm, 1751mm, the wheelbase is 2890mm, the fuel tank capacity is 78l, and the body weight is 1831kg. The 2016 two-wheel drive travel version of the Dodge Journey has a front suspension of McPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 2.4t naturally aspirated engine, with a maximum horsepower of 170ps, a maximum power of 125kw, a maximum torque of 220nm, and is matched with a 6-speed manual and automatic transmission.
18
5
Share

Is Brake Fluid the Same as Power Steering Fluid?

Brake fluid and power steering fluid are not the same. Brake fluid, also known as hydraulic brake fluid, is a functional liquid in the vehicle's braking system that transmits pressure to enable the braking action on the wheel's braking system. Brake fluid does not undergo chemical reactions, is unaffected by high temperatures, and does not corrode, soften, or expand metal and rubber components. The consequences of not changing brake fluid for an extended period include reduced braking force, the formation of vapor lock in the brake lines affecting braking, corrosion of the brake lines, damage to internal valves in the anti-lock braking hydraulic assembly, and wear of the rubber cups and pistons in the brake master cylinder, leading to contamination of the brake fluid.
7
1
Share

How many minutes does it take for the car's water temperature to rise?

It takes about ten minutes for the car's water temperature to rise. The reasons for high water temperature in a car include: 1. Impurities or foreign objects blocking the radiator, leading to poor water circulation and causing the temperature to rise; 2. Leakage in the radiator resulting in water shortage and high temperature. The normal water temperature of an engine should be maintained between 85 to 95 degrees Celsius. Excessive water temperature can cause poor engine heat dissipation, expansion of parts leading to reduced clearance between components, and on the other hand, high temperature reduces the viscosity of engine oil, leading to increased wear of parts. When the temperature gauge needle approaches the red zone or the temperature warning light comes on, it is necessary to pull over, turn off the engine, and check.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.