What is the fuel tank capacity of the Toyota Land Cruiser?

What are the fuel consumption figures for the Haval H9 and Highlander?

The Haval H9 has a fuel consumption of approximately 10.5 liters per 100 kilometers, while the Highlander consumes about 11.3 liters per 100 kilometers. Here are some additional details: 1. Both the Haval H9 and Highlander are equipped with a 2.0-liter turbocharged engine. The Highlander's 2.0-liter turbocharged engine produces 220 horsepower and 350 Nm of maximum torque. This engine features hybrid injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission. The Haval H9's 2.0-liter turbocharged engine delivers 224 horsepower and 385 Nm of maximum torque. This engine utilizes direct fuel injection technology and features an aluminum alloy cylinder head with a cast iron block. It is paired with an 8-speed automatic transmission. 2. The Highlander is classified as a midsize SUV, while the Haval H9 is categorized as a full-size SUV.

18

5

Share

How to Remove Windshield Scratches?

Here are methods for removing scratches from car windshields: 1. Clean the glass: Use a clean cloth to thoroughly clean the glass, ensuring there are no debris or impurities, and let the glass dry in a suitable environment. 2. Wet a microfiber cloth: Under warm running water, take a clean, lint-free cloth (at least not rough material, preferably smooth and non-shedding). Wring the cloth tightly until no excess water drips. (Any debris on the cloth, including dust or lint, can rub against the glass and cause uneven wear or more scratches.) 3. Apply toothpaste to the cloth: Squeeze an appropriate amount of toothpaste onto the cloth according to the size of the scratch, adding more if needed. (It's best to use white non-gel toothpaste, especially those containing baking soda as an ingredient, which are most effective for removing scratches.)

16

3

Share

What is a Car Platform

An automobile platform can be understood as an original "template" for vehicles. This template includes fundamental components of a car such as the chassis, body structure, electrical systems, and even production processes. In the early stages of the platform concept, vehicles sharing the same platform indeed had strictly interchangeable chassis components. However, with advancements in automotive technology, the concept of car platforms has evolved. Additional information: 1. Geely BMA Modular Architecture: The BMA platform is a new modular platform independently developed by Geely. Unlike the CMA platform co-developed by Geely & Volvo, which is allocated according to vehicle class, the BMA platform, standing for B-segment Modular Architecture, is designed for A-segment vehicles, suitable for A0 to A+ classes. Currently, several models such as the Geely ICON, Haoyue, Binrui, and Binyue are built on this platform. 2. Toyota TNGA Architecture: The full name of Toyota TNGA is Toyota New Global Architecture. Strictly speaking, TNGA is a comprehensive value platform covering the entire automotive industry chain, including R&D, design, production, and procurement. Its primary function is to optimize and integrate resources within Toyota and its cooperative suppliers across corporate systems, R&D systems, production systems, and parts systems. 3. Volkswagen MQB Platform: The Volkswagen MQB platform, fully known as Modular Querbaukasten, or "Modular Transverse Matrix," is arguably the most important and widely used car platform within the Volkswagen Group. It currently encompasses numerous models under brands such as Volkswagen, Skoda, and Audi.

8

2

Share

What is the normal tire pressure for light trucks

Light trucks typically have a front tire pressure of around 9 and a rear tire pressure of around 11. Below is relevant information about tire pressure: 1. Over-inflation: Affects tire friction and adhesion, weakening braking performance; causes vehicle vibration, reducing comfort; accelerates wear on the central part of the tire, shortening its lifespan; increases the load on the vehicle while driving; reduces puncture resistance, making it easier for sharp objects like nails to penetrate the tire, leading to blowouts. 2. Under-inflation: Increases friction with the road surface, raising fuel consumption; makes the steering wheel heavier and prone to veering; increases tire movement, causing abnormal heat buildup; accelerates tire wear, shortening its lifespan; softens the tire, reducing its strength and potentially causing blowouts; leads to sidewall cracking, promoting rubber aging and accelerating shoulder wear.

20

1

Share

Can I replace just one tire?

If the tread wear on the car tire is still relatively light, it is acceptable to replace just one tire, as the wear on tires on the same axle is usually similar. However, it is essential to ensure that the tread pattern, structure, brand, and specifications of the tires on the same axle are identical. Additional information: 1. If the tread wear is severe, and the tire has traveled tens of thousands of kilometers but does not yet require replacement, except for one problematic tire, replacing just one tire can significantly impact driving safety. This may cause the vehicle to pull to one side or even lose control. 2. When tire wear is severe, a new tire will have greater friction and grip compared to the old one. If only one tire is replaced, the difference in grip between the new and old tires can cause the vehicle to pull to one side or even lose control. Additionally, the vehicle may experience uneven height, leading to bumpiness or pulling issues at higher speeds. Therefore, in such cases, it is best to replace a pair of tires. 3. The placement of new tires on a vehicle is also crucial. Generally, new tires should be installed on the drive wheels. For front-wheel-drive vehicles, new tires should be placed on the front wheels, while for rear-wheel-drive vehicles, they should be placed on the rear wheels. For front-wheel-drive vehicles, the front wheels serve as both steering and drive wheels, requiring strong grip during emergency braking. Thus, new tires should be installed on the front wheels of front-wheel-drive vehicles.

10

3

Share

Can the BMW 3 Series Paddle Shifters Be Installed Later?

BMW 3 Series paddle shifters can be installed later, but it requires professional technicians at a 4S dealership for installation. Here is some additional information: 1. Paddle shifters are gear-shifting devices installed for semi-automatic clutches in cars. Their function is to allow gear shifting without stepping on the clutch, achieved by pulling the paddle shifters. 2. As a quick gear-shifting device, paddle shifters can significantly enhance driving operability. Paddle shifters are usually located on the left and right inner arcs of the steering wheel, with both paddles serving the same function. Using paddle shifters, drivers can complete gear shifting operations without taking their hands off the steering wheel.

18

1

Share

What is the fuel tank capacity of the Toyota Land Cruiser?

What are the fuel consumption figures for the Haval H9 and Highlander?

How to Remove Windshield Scratches?

What is a Car Platform

What is the normal tire pressure for light trucks

Can I replace just one tire?

Can the BMW 3 Series Paddle Shifters Be Installed Later?

How Many Days Are Highways Free During Mid-Autumn Festival?

Do I need to be present in person for license plate registration at a 4S dealership?

What Causes the Noise in the Car Dashboard?

How to Use ETC on Highways?