What is the fuel tank capacity of the Touran?

1 Answers
June
07/29/25 10:45pm
The Touran has a total of 6 models, all with a fuel tank capacity of 60 liters. The vehicle's engine features turbocharged intake, front-wheel drive, and is classified as a compact MPV. Among vehicles in the same class, the Buick GL6 2021 323T Light Hybrid Connected Elite model has a fuel tank capacity of 45 liters, while the JAC Refine M5 2021 2.0T Diesel Manual National VI version has a fuel tank capacity of 70 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates that the fuel is nearly depleted, while being close to 'F' means the fuel level is sufficient.
Was this review help?
5
0
Share
More Forum Discussions

How to Connect Bluetooth for Music Playback in 12th Generation Crown?

Enable Bluetooth in your phone settings, ensuring the phone's Bluetooth is turned on. Activate the car's Bluetooth system, then search for your phone via the car's Bluetooth. Once detected, connect to your phone, and your phone will prompt for pairing confirmation. After successful pairing, you can enjoy phone connectivity features such as playing music through your phone and using the car's Bluetooth for making and receiving calls.
4
0
Share

What is the method for jump-starting a car battery?

First, locate the batteries of both vehicles and ensure the rescue vehicle is turned off. Connect the positive terminals of both vehicle batteries with jumper cables. After connecting, attach one end to the negative terminal of the rescue vehicle's battery and the other end to the engine block of the vehicle being rescued. After confirming the jumper cables are properly connected, start the rescue vehicle first, then start the vehicle being rescued. Once the rescued vehicle starts successfully, the jumper cables can be removed.
13
0
Share

How to Repair a Fender Dent?

After disassembly, use a specialized hook to pry out the dent, then tap it back into place with a rubber mallet, using light to check for levelness. However, edges and reinforced areas cannot be treated this way. Alternatively, use a machine to suction out the dented portion, then tap it back with a rubber mallet. This method can also effectively repair reinforced areas.
13
0
Share

How to Replace the Battery in a BAIC Weiwang M50F Key

Press and hold the black button on the widest part of the key, then apply downward force to remove the bright silver decorative cover. Use a small flathead screwdriver or your fingernail to apply downward force and remove the bright silver decorative covers on both sides of the key. Insert an appropriately sized flathead screwdriver into the recessed hole near the metal keyring attachment point, then apply lateral force to pry open the key cover. Once opened, you'll see the key battery - simply replace the old battery.
15
1
Share

How to Auto-Fold the Rearview Mirrors on BMW X2?

On the BMW X2's central control, select "Vehicle" and press the left button on the MMI. After entering this interface, choose "Vehicle Settings". Then select "Central Locking", check the "Fold Mirrors" option, and the rearview mirrors will automatically fold when you lock the car.
1
3
Share

How to Use ETC for the First Time?

Newly installed ETC cannot be used immediately; the ETC device must be successfully activated before normal use. ETC Activation Method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If inserting and removing twice without the electronic tag attached shows "Tag Invalid," this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually a download QR code is provided on the electronic tag), and enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.