What is the fuel tank capacity of the Tiida in liters?

2 Answers
Scarlett
07/29/25 12:50am
The fuel tank capacity of the Tiida is 52 liters. The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can cover a distance of over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers typically has a fuel tank capacity of around 60 liters. The fuel tank capacity varies for different car models, and even among similar models from different brands. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4250mm in length, 1695mm in width, and 1535mm in height. In terms of interior design, the Tiida's cabin, much like its exterior, incorporates numerous curved designs, giving the overall interior a more fashionable appearance compared to the older model, with a clear and user-friendly layout.
Was this review help?
1
3
Share
McLevi
08/12/25 5:01am
I've just researched the fuel tank configuration of the Nissan Tiida. The standard capacity is typically 52 liters. This figure applies to most models such as the 1.6L and 1.8L engine variants, although some special editions may have slight variations around 50 liters, but the mainstream is 52 liters. The fuel tank size significantly impacts daily driving - a full tank can average 650-750 km in urban conditions, and may exceed 800 km on highways, depending on your driving habits and vehicle condition. I recommend not waiting until the fuel warning light comes on to refuel, as this could damage the fuel pump. Regular maintenance checks on the fuel cap's sealing are also important to prevent dust or moisture from affecting fuel quality. For long trips, planning gas stations in advance is very convenient.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

Should an automatic transmission car be started in P gear?

P gear and N gear can both be used to start the engine. P gear is the parking gear, while N gear is the neutral gear. Use P gear for long-term parking, and N gear for brief stops such as waiting at a traffic light. Relevant knowledge about starting an automatic transmission vehicle is as follows: 1. Starting an automatic transmission vehicle: Insert the key into the ignition switch, press the brake, and start the engine. 2. Prerequisites for starting in N gear: The vehicle can also be started in N gear, but there is a prerequisite: the key must be turned to the start position (without starting), the dashboard must display OK, press the brake, shift the gear lever from P gear to N gear, and then start the engine. Be sure not to release the handbrake. This method is generally used in repair shops.
9
3
Share

How to notify vehicle relocation with temporary license plates?

Temporary license plates cannot be used to notify the vehicle owner to move the car. Here is some relevant information about temporary license plates: 1. Introduction: Temporary license plates are paper-based motor vehicle license plates issued to allow temporary road use of vehicles, primarily referring to temporary vehicle movement permits issued by the vehicle management authorities for newly purchased vehicles before official registration. 2. Relevant regulations: New vehicles using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for official license plates. After expiration, penalties may include vehicle impoundment, fines, and point deductions. 3. Penalties: New vehicles using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for official license plates. After expiration, penalties may include vehicle impoundment, fines, and a 12-point deduction.
17
0
Share

Where are Roewe engines produced?

Roewe uses engines jointly developed by SAIC Motor and General Motors, which belong to the independent brand. The engine model used by Roewe is 20A4E, with a maximum horsepower of 234 hp, a maximum power of 172 KW, a maximum power speed of 5000-5500 rpm, and a maximum torque of 360 Nm. For the daily maintenance of Roewe engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass and still carry dirt back to the lubrication parts, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder generated by component wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
2
2
Share

Which car is the GTR?

GTR refers to the Nissan GT-R, a high-performance, high-power sports car produced by Nissan. Here is some relevant information about the GT-R: This car boasts extremely strong performance and has many fans in China. The Nissan GT-R originates from the Nissan lineup, starting with the GT-R35, it broke away from the Skyline series to become Nissan's ultimate performance flagship. The GT-R is equipped with a 3.8-liter twin-turbocharged V6 engine codenamed VR38DETT. This engine has a maximum power output of 408 kW, a maximum torque of 632 Nm, a maximum power rpm of 6800, and a maximum torque rpm ranging from 3300 to 5800. It is paired with a 6-speed dual-clutch transmission. The GT-R is a full-time four-wheel-drive model, featuring a multi-plate clutch-type center differential. It uses double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The rear axle is equipped with a limited-slip differential.
3
1
Share

Why does an automatic transmission car suddenly lose gear while driving?

If an automatic transmission car suddenly loses gear while driving, it may be due to the transmission skipping gears. Here are some points to pay attention to when driving an automatic transmission car: 1. Correct starting method: The correct way to start is to shift the gear to N (Neutral) before igniting and starting the car, thus avoiding passing through R (Reverse) gear. 2. Temporary stops: Most automatic transmission car owners will only press the brake pedal and keep the gear in D (Drive) when encountering a stop. However, it's important to note that this is correct for brief stops like waiting at a traffic light. For prolonged traffic jams, it's better to shift to N (Neutral) or P (Park) gear. This not only saves fuel but, more importantly, prevents the brake discs and transmission fluid temperature from rising due to prolonged braking, which can damage the vehicle. 3. Overtaking with an automatic transmission car: Unlike manual transmission cars, automatic transmission cars cannot manually shift gears when overtaking. Therefore, before overtaking, you can briefly release the throttle and then press it again to allow the transmission to automatically downshift and increase power output. Mastering the use of the throttle to control gear shifting is also essential for drivers.
4
3
Share

How long can the data from a dash cam be saved?

Generally, it can be saved for about 3 days to a week. Here is some related knowledge about dash cams: 1. How to turn off a dash cam: Normally, the dash cam will start running when the vehicle is started and will automatically shut down when the vehicle is parked and turned off. You can also press the power button to turn it off directly. 2. About parking monitoring: Dash cams with parking monitoring usually draw power directly from the ACC fuse box via a step-down cable. When the vehicle is parked and turned off, the dash cam will automatically shut down (more accurately, it enters a low-power sleep mode). However, once it detects a collision or movement in front of the vehicle, it will immediately activate the parking monitoring function and record the surrounding footage.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.