What is the fuel tank capacity of the Tiguan?

1 Answers
OAustin
07/29/25 6:37pm
The fuel tank capacity of the Tiguan is 63L, and the recommended gasoline specification is 92-octane or higher unleaded gasoline. The fuel tank capacity refers to the size of the tank, which measures a vehicle's ability to carry fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the one with the larger fuel tank can travel farther. The Tiguan's side profile maintains the consistent stability of German cars, while the rear design, like the side, gives a classic and timeless first impression. The taillights complement the headlights, showcasing a unified front and rear style. In terms of other configurations, the large-size tires are particularly eye-catching, ensuring a perfect combination of off-road and on-road performance. The Tiguan's dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm.
Was this review help?
5
1
Share
More Forum Discussions

What is the distance between parallel parking and the yellow line?

Parallel parking should maintain a distance of 20cm from the yellow line. Here are the precautions for parallel parking: 1. Adjust distance: Properly adjust the distance between the vehicle body and the edge of the parking space, as well as the distance between the vehicle body and the parking space, avoiding being too close to the parking space. 2. Align properly: Ensure accurate alignment when steering. 3. Entering/exiting the space: Activate the left turn signal when entering the parking space, and avoid running over the corner of the parking space when exiting. 4. During operation: Do not stop midway, roll back, stall, or cross lines during the entire process. 5. Use turn signals: Remember to activate the turn signal when exiting from parallel parking. Points are deducted for turn signal usage, 30cm margin, and line crossing issues.
7
5
Share

Why Does the Noise Increase After Installing New Shock Absorbers?

1. Suspension system noise: Although this falls under the category of normal aging, different users may experience significantly different results. A large part of the noise is caused by wear and tear of the wheel hub bearings or a reduction in the damping capacity of the shock absorber fluid. There are also many cases where the shock absorber fluid has completely leaked out. Since the vehicle's shock absorption performance relies on both the shock absorber fluid and the springs, the loss of the fluid's effectiveness can significantly increase noise. 2. Engine and accessory noise: This is due to the normal wear and tear of internal engine components over time. If there have been previous abnormal incidents, such as unnoticed oil leaks or coolant leaks, the noise from such engines will be more pronounced, with the level of noise varying depending on the severity of the incident. 3. Exhaust pipe noise: This is part of normal aging. For exhaust pipes that are around 10 years old or have traveled approximately 200,000 kilometers, frequent exposure to acidic and alkaline mixtures like mud and water at the bottom of the vehicle body may lead to rust-induced leaks, thereby increasing noise at the rear of the vehicle.
19
3
Share

What is the reason for the appearance of a small yellow wrench on the CRV?

When the wrench light appears on the CRV's dashboard, it indicates that the vehicle has reached its scheduled maintenance date. The owner can go to a professional 4S shop to have it cleared. By connecting a specialized computer to the OBD interface, the wrench light can be easily cleared. Some vehicle models' maintenance lights cannot be cleared manually, so it is necessary to visit a professional repair shop for clearance. Relevant information about car maintenance is as follows: 1. Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Maintenance scope: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas.
12
1
Share

What is the minimum ground clearance of the Buick GL8?

The minimum ground clearance of the Buick GL8 is 143 millimeters. The minimum ground clearance of the Buick GL8 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance of the Buick GL8 improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The first-generation GL8 was launched in 2000, with the Chevrolet Venture as its prototype. It was also sold under the Pontiac brand. This vehicle is characterized as a typical American large car—rugged in quality but affordable and spacious. The Buick GL8's dimensions are 5219 mm in length, 1878 mm in width, and 1799 mm in height, with a wheelbase of 3088 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Buick GL8 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Buick GL8's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the driving conditions. For urban areas with well-paved roads, vehicles with lower ground clearance are preferable for enhanced stability and comfort. For long-distance travel or driving in areas with poor road conditions, vehicles with higher ground clearance are recommended to avoid chassis scraping or damage, considering the vehicle's off-road performance.
18
1
Share

Will Parking on a Small Slope for One Day Damage the Car?

If it is short-term or occasional, the impact is minimal. However, prolonged parking under such conditions can cause significant damage to the vehicle and even pose safety hazards. When parking on a slope, extra caution is required during starting and stopping to prevent rolling. More relevant details are as follows: 1. Impact on the suspension: When parking on a slope, the side facing downhill bears greater pressure on the suspension. Over time, this can lead to uneven aging and varying stiffness between the front and rear suspensions, affecting ride comfort. 2. Risk of rolling when parking on a slope for extended periods: If parked on a slope for too long, the handbrake may age and fail at any time. If the driver is not attentive, a rolling accident could indeed occur. Therefore, it is advisable to avoid parking on slopes whenever possible to prevent overuse of the handbrake.
10
5
Share

Is Parallel Parking Required to Be Perfectly Parallel?

Parallel parking does not strictly require the vehicle to be perfectly parallel to the curb. Below are the specific deduction criteria for parallel parking: 1. Fail: The vehicle exceeds the line after stopping in the parking space; the vehicle is not parked within the designated area; the test is not completed within the specified time. 2. Deduct 5 points: Stopping midway; the vehicle is not properly aligned after parking. 3. Deduct 10 points: The tires touch the lane boundary line while driving; failure to turn on the left turn signal when starting; failure to turn on the right turn signal when reversing; the vehicle body touches the boundary line of the parking space while driving. 4. Deduct 20 points: Failing to park the vehicle in one attempt; hitting or scraping the parking poles.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.