What is the fuel tank capacity of the Sylphy in liters?

2 Answers
LaThomas
07/25/25 1:16pm
The fuel tank capacity of the Sylphy is 52 liters. The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can allow the car to travel over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers typically has a fuel tank capacity of around 60 liters. The fuel tank capacity determines the driving range; for two cars with identical engines, the one with the larger fuel tank can travel farther. The Sylphy is a strategic model launched by Nissan, with dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, and a maximum torque of 153Nm. The Sylphy features innovative design and advanced technology, with an S-curve dynamic exterior that exudes stylish and sophisticated aesthetics. Its 2700mm ultra-long wheelbase creates spacious rear legroom, ensuring a comfortable and effortless ride.
Was this review help?
14
1
Share
DelLila
08/11/25 8:40pm
I've talked to many Sylphy owners, and the fuel tank capacity is usually 50 liters, which is the standard configuration and quite practical for daily commuting. When you fill up the tank, you can drive approximately 600-700 kilometers, depending on road conditions and driving habits, such as being more fuel-efficient on highways. I recommend refueling during early morning or late evening hours when gas stations are less crowded, the fuel is fresher, and you can avoid long queues. Additionally, regularly check if the fuel cap is tightly sealed to prevent evaporation loss, which can save you some fuel costs. The Sylphy's fuel system is designed for high efficiency, and with good refueling habits, it can extend the engine's lifespan, making it both economical and practical.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What are the effects of water entering the brake system?

The impact of water entering the brake system is that it can cause brake lag, leading to vehicle deviation during braking and potential accidents. Below is an introduction about brakes: Introduction: As the name suggests, it is a mechanical braking device that can slow down the vehicle, also known as a decelerator. Function: The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake lever linkage to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc to slow down or stop the vehicle. Category: The manual brake in a car is located next to the gear shift and is connected to the brake lever. Common types also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc-mounted caliper brakes to slow down.
12
5
Share

What is the reason for the occasional feeling of a loose brake pedal?

Occasionally feeling a loose brake pedal accompanied by a decrease in braking force indicates a malfunction in the brake system. Below is relevant information about brakes: Introduction: As the name suggests, it is a mechanical braking device that slows down the vehicle, also known as a decelerator. Structure: The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, which then clamp the brake disc. Function: To slow down or stop the vehicle. The manual brake in a car is located beside the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc caliper brakes to decelerate.
20
3
Share

What is the material of brake discs?

The material of brake discs adopts the domestic gray cast iron 250 standard, abbreviated as HT250, which is equivalent to the American G3000 standard. The requirements for the three main chemical elements are: C: 3.1~3.4, Si: 1.9~2.3, Mn: 0.6~0.9. More details are as follows: Mechanical performance requirements: tensile strength >=206MPa, bending strength >=1000MPa, deflection >=5.1mm, hardness should be between 187~241HBS. Alternative names: In English, brake discs are usually referred to as BRAKE-DISC or BRAKE-ROTORS, while brake drums are called BRAKE-DRUM. Additionally, in southern China, brake discs are also known as brake discs or brake rotors. In fact, they all refer to the same thing.
7
0
Share

Have There Been Any Accidents Involving Brake Caliper Covers?

Currently, there have been no reported accidents of this nature. Caliper covers can impede heat dissipation from the brake calipers and may pose risks of detachment or even fracture. Below is additional information regarding vehicle installation of caliper covers: Reasons: Automobile brake caliper covers can affect heat dissipation from brake discs, potentially altering normal braking distances and raising safety concerns. Overview: Brake calipers are clamping devices designed to decelerate, stop, or maintain the stationary state of moving wheels, typically employed exclusively in disc brake systems. Working Principle: A vehicle's disc brake system consists of a brake fluid pump, a brake disc connected to the wheel, and the caliper assembly mounted on the disc. During braking, high-pressure brake fluid drives pistons within the caliper, forcing brake pads against the disc to generate braking force.
2
1
Share

What Causes Brake Caliper Noise?

Brake caliper noise may be caused by loosening or corrosion of the caliper guide pins, which can be resolved by replacement and lubrication with grease. It could also be the sound of the brake pads hitting the caliper. Additionally, if there are foreign objects between the caliper and brake disc, noise may occur. It's best to have a professional diagnose the specific cause at a repair shop. Below is an expanded explanation: Brake Caliper Concept: The brake system consists of a master cylinder and brake calipers. Simply put, the master cylinder stores brake fluid and has inlet and outlet ports. When the brake pedal is pressed, brake fluid flows from the master cylinder through pipes to the calipers. When the calipers receive pressure, they push the brake pads to friction against the brake drum, achieving braking. Symptoms of a Faulty Brake Caliper: 1. Oil leakage at the connection between the caliper and oil pipe, and a soft feeling when pressing the brake pedal; 2. The steering wheel noticeably pulls to one side after pressing the brake pedal, likely due to uneven brake pad wear or caliper malfunction; 3. After pressing the brake pedal, the pedal does not rise and lacks resistance, commonly referred to as the brake not returning to position.
6
2
Share

Can You Continue Driving with Overheated Brake Discs?

You should not continue driving with overheated brake discs. Here are the relevant explanations: Friction: The working principle of brakes mainly comes from friction, which converts the kinetic energy of the moving vehicle into frictional heat energy by utilizing the friction between the brake pads and the brake disc (drum), as well as between the tires and the ground, to bring the vehicle to a stop. Therefore, if you notice any abnormal conditions with the brake pads, they must be addressed immediately. Thickness: Under normal driving conditions, the brake pads should be inspected every 5,000 kilometers. Not only should the remaining thickness be checked, but also the wear condition of the pads, whether the wear on both sides is even, and whether the retraction is smooth, etc. Any abnormal conditions must be dealt with immediately.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.