What is the fuel tank capacity of the Sylphy?

2 Answers
LaKai
07/25/25 6:11am
Currently, there are 11 available models of the Sylphy. The e-POWER version has a fuel tank capacity of 41L, the classic version has a capacity of 50L, and other versions have a capacity of 47L. This data is provided by the car manufacturer, and Sylphy owners can also check it on the vehicle's configuration sheet. The Sylphy uses 92-octane fuel. The e-POWER version has a fuel consumption of 3.9L per 100km, allowing a range of 1051km on a full tank. The classic version has a fuel consumption of 5.2 to 6.1L per 100km, with a range of 820 to 962km on a full tank. Other versions have a fuel consumption of 4.9 to 5.3L per 100km, offering a range of 887 to 959km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately displayed on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the manufacturer's specified fuel tank capacity is measured from the bottom of the tank to the safety limit, with additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount may exceed the calibrated capacity.
Was this review help?
10
0
Share
VonBraxton
08/10/25 6:04pm
My Nissan Sylphy has been running for almost three years now, and each time I refuel, it takes about 47 liters. Once before a highway trip, I deliberately filled it up, and when the fuel gauge light came on, I calculated that I had driven over 600 kilometers. With this capacity, I only need to refuel every two weeks for daily commuting, and it's more than enough for short weekend trips. The fuel tank design is quite clever, with the filler opening on the left rear side, allowing the fuel nozzle to go all the way in. I remember when I first picked up the car, the salesperson reminded me that there's a protective layer at the bottom of the new car's fuel tank, so not to fill it up completely the first time. Normally, I refuel when the yellow light comes on, and a little over 300 yuan is enough to fill it up. Once, a relative borrowed the car for a mountain trip, started with a full tank, and didn’t need to find a gas station the entire trip. When they returned, they praised how practical the fuel tank was.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

How to adjust the rear seats of the Buick GL8?

Buick GL8 rear seat adjustment method: There are buttons on the side of the rear seats that can be pressed to adjust the position. Press the front part to move the seat forward and the rear part to move it backward. The armrest of the rear seats can be adjusted by pulling it manually. The third-row seats of the Buick GL8 are completely fixed and can only be folded in a common 60/40 split. The Buick GL8 is an MPV model under SAIC-GM Buick, with a length, width, and height of 5238 mm, 1878 mm, and 1776 mm respectively, and a wheelbase of 3088 mm. In terms of suspension, the front suspension of the Buick GL8 is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
16
2
Share

How to Lift the Wiper Blades on the Volkswagen Lamando?

Steps to lift the wiper blades on the Volkswagen Lamando: 1. Press the brake pedal; 2. Press the one-touch start button; 3. The vehicle's power system will be activated; 4. Pull down the wiper control switch to engage the wipers; 5. At the moment the wipers start moving, press the one-touch start button again to turn off the vehicle's power, which will leave the wipers in an upright position on the windshield. The Lamando is a compact car introduced by Shanghai Volkswagen, with dimensions of 4599 mm in length, 1826 mm in width, and 1425 mm in height, and a wheelbase of 2656 mm. For the interior, the Volkswagen Lamando features 20 white ambient lights distributed in the front and rear footwells, inner door handles, armrests, storage compartments, and decorative strips on all four doors. The brightness can be adjusted via the MIB system to create a mysterious ambient effect.
9
0
Share

What does AC mean on a car's air conditioning?

AC on a car's air conditioning refers to the cooling switch. Pressing AC turns on the air conditioning. The functions of car air conditioning include: 1. Regulating the temperature, humidity, airflow, and cleanliness of the air inside the car; 2. Filtering the air inside the car, with a sterilizing effect; 3. Clearing fog from the windows. The principle of car air conditioning cooling is: Low-pressure, low-temperature refrigerant vapor in the cooling system is sucked in by the compressor and compressed into high-pressure, high-temperature superheated vapor, which is then discharged to the condenser. At the same time, the external fan draws in outside air that flows through the condenser, carrying away the heat released by the refrigerant, causing the high-pressure, high-temperature refrigerant vapor to condense into a high-pressure liquid. The high-pressure liquid then passes through a throttle to reduce pressure and temperature before flowing into the evaporator, where it evaporates at the corresponding pressure, absorbing surrounding heat. Simultaneously, the internal fan circulates air inside the car through the evaporator's fins for heat exchange, and the cooled air is then directed back into the car.
3
2
Share

How to Use the Cruise Control on the 10th Generation Accord Elite Edition?

The method to use the cruise control on the 10th Generation Accord Elite Edition: 1. Turn on the cruise control switch CRUISE, and the cruise control indicator light on the dashboard will illuminate. Drive to the desired speed and press the SET button to set the current speed, completing the setup; 2. If you want to adjust the speed, press the RES button to accelerate or the SET button to decelerate; 3. To deactivate the cruise control, you can press the brake pedal, press the CANCEL button, or press the ON/OFF switch. The 10th Generation Accord Elite Edition is a mid-size car under GAC Honda, with dimensions of 4893 mm in length, 1862 mm in width, and 1449 mm in height, and a wheelbase of 2830 mm. The 10th Generation Accord Elite Edition features front-engine, front-wheel-drive layout, with a front MacPherson independent suspension and a rear multi-link independent suspension.
6
2
Share

Why is the REST light not working in the Magotan?

The reasons why the REST light is not working in the Magotan: 1. The vehicle is not turned off, as the REST button can only be used after the vehicle is turned off; 2. If the button still does not light up after the vehicle is turned off, it indicates a problem, and it is recommended to promptly visit a 4S store or a professional auto repair shop for inspection. The function of the REST button is residual heat heating, which utilizes the residual heat of the engine to provide warm air inside the car after the engine is turned off, preventing a rapid drop in temperature. The heating duration is generally half an hour before automatically shutting off. The Magotan originates from the Future B6, which is closely related to the Passat B6. The vehicle's dimensions are 4865 mm in length, 1820 mm in width, and 1475 mm in height, with a wheelbase of 2812 mm. In terms of appearance, the Magotan's body and rear design showcase the designer's trend-following approach, with elegant and smooth side lines for a more dynamic look, and the rear light clusters are agile and harmonious.
8
4
Share

If I run a red light and get caught, how many days will it take to receive the notification?

After running a red light, the text message notification for the violation is usually received within 3 to 7 days, and at the latest within about 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive a text message notification within 5-10 minutes of being caught. But this notification does not mean a violation has been confirmed; it is merely a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another text message notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation text message immediately. There is a delay, and the length of this delay can vary. After an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and handed over to the relevant traffic police department staff for verification. If the violation is confirmed, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via text message to the owner. After receiving the violation text message, the vehicle owner must go to the traffic police department where the violation occurred to handle the matter within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation text message is received after 15 days, it is likely that no violation was recorded. Methods for checking traffic violations: Traffic violation checking refers to the process of querying motor vehicle violations of traffic management regulations through the internet or query terminals. Methods for checking vehicle violations include checking through vehicle violation websites, phone queries, text message queries, and mobile app queries. Website query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone query: To check for violations, you can call local 114 (area code + 114) or 12580 for confirmation. Violations can only be handled at the location where the violation occurred or at the traffic police department where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the location of the violation. Text message query: Open your phone's text message interface; enter "WZ" followed by your license plate number and color in the message content; then enter 1062650001 as the recipient and click send. Mobile app query: Open the Traffic Management 12123 app, select "violation query," and find any unhandled violations to clear them.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.