What is the fuel tank capacity of the sixth-generation Camry?

2 Answers
VonBradley
07/24/25 12:17am
The fuel tank capacity of the sixth-generation Camry is 60L. Below are the maintenance and cleaning methods for the car fuel tank. Maintenance methods for the car fuel tank: The maintenance of the fuel tank mainly involves combining it with the car's primary maintenance, draining accumulated water and sediment from the tank, and checking for leaks at fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, the ventilation holes should also be checked to ensure they are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel from spilling out while driving. Cleaning methods for the car fuel tank: The car fuel tank should generally be cleaned every three months. When cleaning the tank, rinse the interior with hot water, then dry it with compressed air to remove gasoline vapors inside. Soak the fuel tank in a 10% sodium hydroxide solution, then rinse the interior and exterior with running water. Alternatively, clean with a 5% boiling caustic soda solution followed by rinsing with hot water.
Was this review help?
12
4
Share
LeColin
08/10/25 8:01pm
I remember the sixth-generation Camry has a 70-liter fuel tank, which is quite generous for a mid-size sedan. It's especially worry-free for long-distance driving. Last year during a road trip, I drove nearly 700 kilometers on a full tank, and the dashboard warning light indicated I could still go another 70-80 kilometers. But for safety, I always refuel in advance. When refueling, pay attention to the fuel grade—just use 92 octane, don't waste money on 95. In city traffic, fuel consumption is higher, but the large tank becomes an advantage, saving you from frequent trips to the gas station to queue up.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

How to Remove the Verna Brake Light Switch?

The following are the steps to remove the Verna brake light switch: 1. Remove the cover plate: The brake light switch is located above the brake pedal, with a spring contact pressing against the brake pedal linkage. The cover plate is the base plate above the brake, clutch, and accelerator pedals, secured by three self-tapping screws and supported by two plastic clips inside. Metric hex keys are required to remove the self-tapping screws. 2. Disconnect the wiring: After removing the cover plate, the brake light switch can be seen above the brake pedal. The switch connector is a clip-type; gently squeeze the clips on both sides to disconnect it easily. 3. Remove the switch: This switch is a twist-lock type and cannot be pulled out by force. Hold the switch and twist it to the left to remove it smoothly.
19
5
Share

How to Set the Tire Pressure Display on the Levin?

Here are the steps to set the tire pressure display on the Levin: 1. Press and hold the MENU button for 3 seconds. After a beep sound, you will enter the setup function. 2. Press and hold the ADJ button for more than 3 seconds, and the low-pressure alarm value will cycle between 1.8 and 3.2. Release the button when the desired value flashes. 3. Press and hold the MENU button for 3 seconds. Upon hearing two beeps, the settings will be saved and you will exit the setup. Unit setting: Press and hold the MENU button for 3 seconds to enter the setup function after a beep sound. Press the ADJ button briefly to switch between BAR and PSI units.
2
3
Share

What level of vehicle is the SWM G05?

SWM G05 is a mid-size SUV. Here are the specific details about the SWM G05: 1. The SWM G05 is the second SUV product born under SWM's G platform, officially launched at the Chengdu Auto Show on September 5, 2019. 2. In terms of exterior design, it adopts the styling concept of the SWM G01, with more line designs on the body, especially the front grille design, which has a larger area. 3. In terms of body dimensions, the length, width, and height are 4750*1860*1780mm, with a wheelbase of 2750mm. 4. For the interior, it features a T-shaped instrument panel design, with a large touchscreen on the center console. 5. In terms of powertrain, it offers two engine options: a 2.0L naturally aspirated engine and a 1.5T turbocharged engine. The 2.0L engine delivers a maximum power of 105kW and a maximum torque of 190Nm, while the 1.5T engine produces a maximum power of 115kW and a maximum torque of 230Nm.
12
3
Share

How Many Cylinders Does the Geely Xingyue Engine Have?

Xingyue is equipped with two engines in total, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5T engine is a three-cylinder, while the 2.0T engine is a four-cylinder. Xingyue is a model under Geely, a compact sport SUV. Below is an introduction to these two engines: 1. The 1.5T engine, codenamed JLH-3G15TD, has a maximum power of 130kW and a maximum torque of 255 Nm. This engine features direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The 2.0-liter turbocharged engine, codenamed JLH-4G20TDB, has a maximum power of 175kW and a maximum torque of 350 Nm. This engine also features direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission.
9
0
Share

Which company is WM Motor?

WM Motor belongs to WM Motor Technology Group Co., Ltd. The company was formerly known as WM Motor Technology Co., Ltd. Its predecessor was a three-electric system R&D enterprise established by Du Ligang in 2012. WM Motor was officially founded in January 2015. WM Motor is an emerging new energy vehicle brand in China, founded by Freeman Shen, former Vice President of Geely Holding Group, Senior Vice President of Volvo Global, and Chairman of Volvo China. WM Motor aims to build a new energy vehicle enterprise and become a better mobility solution provider. 70% of the company's employees come from traditional automotive manufacturers, while 30% are from the internet industry. The predecessor of WM Motor was a three-electric system R&D enterprise, which established a professional R&D team in Germany and built its own manufacturing plant in Wenzhou, Zhejiang Province. Advantages of WM Motor's new energy vehicles: ample space; attractive exterior design that aligns with mainstream aesthetics; good configurations, including standard full LED lights, automatic air conditioning, and Michelin tires; the manufacturer continuously improves product experience. In addition to regular software upgrades, it has also implemented numerous minor hardware upgrades.
12
5
Share

How long after damage assessment must the car be repaired?

There is no regulation specifying how long after the damage assessment the car must be repaired. Once the damage assessment amount is determined, the insurance company will compensate according to the initially assessed amount regardless of when the repair is done. Here is more information: Time limit: There is a time limit for car damage assessment. After an accident, the insured should promptly notify the insurance company, which will then send someone to inspect and photograph the scene. If the insurance company does not assess the damage within 48 hours, the repair invoice provided by the car owner will be used as the basis. Repair promptly: After the vehicle damage assessment, it is advisable to repair the car as soon as possible to avoid secondary damage that may not be covered by insurance.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.