What is the fuel tank capacity of the Rolls-Royce Phantom in liters?

How long does it take to get a license plate for a motorcycle?

Motorcycle license plates are generally issued on the same day, but there are also cases where, if the number of new vehicle registrations is too high on that day and the plates cannot be produced, you will have to collect the license plate at the time specified by the traffic police. Below is an introduction to the relevant knowledge about motorcycle customs documents: 1. Definition: The shipping order is a document issued by the shipping company that accepts the shipper's application for shipment, commanding the captain to load the goods onto the ship. It serves as the basis for loading and is also the document used by the cargo owner to complete export customs declaration procedures, also known as the customs document. 2. Time to receive the customs document: The customs document for imported vehicles typically takes about 10 working days. From the start of customs declaration to the issuance of the customs document, it takes approximately 10 working days for imported vehicles. When purchasing parallel imported vehicles, it is essential to confirm that the customs document, inspection certificate, conformity certificate, and other relevant vehicle documents are complete before proceeding with the purchase transaction.

2

1

Share

Which Toyota model is referred to as the 'Little Overlord'?

It refers to the Toyota Fortuner. Below is relevant information about the Fortuner: 1. Vehicle appearance and configuration: The color scheme of dark upper and light lower sections paired with silver trim has always been Toyota's signature interior style, which the Fortuner's interior fully demonstrates. In terms of entertainment features, the Fortuner performs well, with the central control screen integrating multiple functions to provide passengers with a relatively diverse range of options. However, in terms of safety features, the Fortuner does not perform as well, only equipped with front airbags. 2. Interior space arrangement: The Fortuner's passenger space performance is good, with ample headroom and legroom in both the front and rear rows. However, the third-row seats are very impractical, as the excessively small legroom makes it very uncomfortable for adults to sit there. The Fortuner's front row has abundant storage space, and the cup holders near the air vents are thoughtfully placed. However, the storage space for rear passengers is disappointingly limited.

15

5

Share

What Does Tire Specification Indicate?

The tire specification indicates the tire's width, aspect ratio, type, and applicable size. Taking 225/60R17 as an example, 225 represents the tire section width of 225mm, 60 is the aspect ratio, meaning the tire sidewall height is 60% of the tire section width, R denotes that the tire is a radial tire, and 17 indicates that the tire is suitable for 17-inch rims. Below is an introduction to radial tires: 1. The crown part of a radial tire is reinforced with steel belts, allowing it to withstand greater internal pressure stress. It features characteristics such as less deformation of the tread, better ground grip, and stability, making it more suitable for high-speed driving. Nowadays, passenger cars commonly use radial tires. 2. Tires can be classified into approximately 8 types based on vehicle categories. Namely: PC — Passenger Car Tires; LT — Light Truck Tires; TB — Truck and Bus Tires; AG — Agricultural Vehicle Tires; OTR — Off-the-Road Tires; ID — Industrial Vehicle Tires; AC — Aircraft Tires; MC — Motorcycle Tires.

16

4

Share

What is the speed range for 3rd gear in a manual transmission?

The speed range for 3rd gear in a manual transmission corresponds to 25~90 kph. The higher the car's power, the higher the maximum speed for each gear. Below is more information about the gear ranges: 1. Speed ranges for each gear: 1st gear speed is 0~30 kph, 2nd gear 10~50 kph, 3rd gear 25~90 kph, 4th gear 35~120 kph, and 5th gear 45 kph and above. 2. Economical driving: If we want to drive economically, it is essential to upshift promptly when the engine speed reaches 2000 rpm. 3. Better power driving: If we want better power while driving, delaying the shift is the best option, but we should also consider the ride comfort inside the car. The engine speed should not be too high; generally, shifting between 2500 rpm~3000 rpm yields better results.

10

1

Share

Should You Start the Engine or Swipe the ID Card First in Subject Two?

In Subject Two, you should swipe your ID card first, and then begin the test after the voice prompt. Below is a relevant introduction to the content of the Subject Two test: 1. Large vehicles: Large buses, tractors, city buses, medium-sized buses, and large trucks are tested on pile parking, hill start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, narrow gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. 2. Small vehicles: Small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and low-speed trucks are tested on reverse parking, hill start and stop (canceled from June 1, 2021), parallel parking, curve driving, and right-angle turning;

4

Share

Which gear should an automatic transmission car be in when parked with the air conditioning on?

When parking an automatic transmission car with the air conditioning on, it is best to shift to P (Park) gear. P gear is the parking gear. N (Neutral) gear is the neutral position, which can be used for short periods. Below is relevant information about automatic transmission gears: 1. Explanation: Automatic transmission cars have four main universal gears, namely P gear, R gear, N gear, and D gear. P gear is the parking brake, allowing the braking system to bear most of the force before finally shifting into P gear. R gear is the reverse gear, used when backing up. N gear is neutral, suitable for short-term parking, while D gear is the drive gear for normal driving. 2. Precautions: In reality, there is little difference between P and N gears, except that when shifted into P gear, a locking mechanism engages the transmission gear, preventing the wheels from turning, whereas N gear lacks this function. If the parking brake is not properly engaged in N gear, the wheels can rotate freely. However, it is particularly important to emphasize that even when shifted into P gear, the parking brake should still be properly engaged, and P gear should not be used as a substitute for the parking brake.

14

4

Share

What is the fuel tank capacity of the Rolls-Royce Phantom in liters?

How long does it take to get a license plate for a motorcycle?

Which Toyota model is referred to as the 'Little Overlord'?

What Does Tire Specification Indicate?

What is the speed range for 3rd gear in a manual transmission?

Should You Start the Engine or Swipe the ID Card First in Subject Two?

Which gear should an automatic transmission car be in when parked with the air conditioning on?

Does prolonged immersion of tires in water have any effects?

What Causes Abnormal Engine Noises When the Engine Oil Burns Out?

Why is the windshield washer fluid not spraying when the reservoir is full?

Can I Still Drive When the Car Reminds Me to Change the Oil?