What is the fuel tank capacity of the Roewe RX5 Plus in liters?

3 Answers
VanKendra
08/29/25 7:40am
The 2021 Roewe RX5 Plus has a total of 5 models, all with a fuel tank capacity of 55L. All vehicles are equipped with a 1.5L turbocharged engine and feature front-engine, front-wheel-drive configuration. Among vehicles in the same class, the 2022 Changan CS75 has a fuel tank capacity of 58 liters, while the 2022 Boyue also has a fuel tank capacity of 58 liters. If owners want to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient. Methods to open the fuel tank: Mechanical key opening: This is commonly seen in some hardcore off-road vehicles. Nowadays, most family cars do not use mechanical keys for opening the fuel tank due to the relative complexity of the process. In-car switch method: The location of the in-car fuel tank switch varies among different car models. It may be found on the floor near the driver's seat, on the left front door panel, or on the center console, always marked with a fuel pump icon. However, it's important to note that using the in-car switch can easily lead to owners forgetting to turn off the engine before refueling. Therefore, owners should always remember to turn off the engine before refueling. Press-type opening method: The press-type fuel tank door is currently the most convenient option. Owners simply need to park the car, and the fuel attendant can press to open the tank for refueling. However, when not parked for refueling, owners should always engage the central locking system; otherwise, the fuel tank cap can be opened.
Was this review help?
4
0
Share
VonAlice
09/11/25 5:09am
I've been driving the Roewe RX5 Plus for almost a year now, and its 55-liter fuel tank is particularly practical for me. Since I frequently take long trips to the suburbs for fishing, a full tank gives me a range of nearly 600 kilometers, eliminating the hassle of frequent refueling. For daily commuting in the city, a single fill-up lasts me over two weeks, which is very convenient. As an SUV, the RX5 Plus offers ample space, with comfortable rear seating for the kids, and combined with this fuel tank capacity, family trips are completely stress-free. I've also noticed that the manufacturer recommends using 92-octane gasoline, advising against wasting money on higher-octane fuel unnecessarily. Overall, the design is quite thoughtful, making it a car worth considering for purchase.
Was this review help?
3
4
Share
Expand All
Tamara
10/25/25 6:01am
The fuel tank capacity of the Roewe RX5 Plus is typically 55 liters, which is considered above average among similar SUVs. Based on my research of vehicle specifications, this model is positioned for family use and commuting, with the tank size matching engine efficiency. Its combined fuel consumption is around 7-8L/100km, which is not particularly fuel-intensive. For those seeking better fuel economy, you can try gently pressing the accelerator or regularly maintaining the fuel injectors. However, compared to some compact models, the RX5 Plus offers significant range advantages, making it suitable for frequent highway drivers. Don't forget to check the fuel tank's sealing, as older vehicles are prone to sedimentation issues. Regularly adding fuel system cleaners can help extend its lifespan.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What type of engine oil should be used for the Changan Oshan X5?

Changan Oshan X7 uses engine oil with the specification 5W-30. The X7 utilizes original manufacturer-branded engine oil. For subsequent maintenance and oil changes, you may choose from brands such as Shell, Mobil, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle. The latter number represents the oil's kinematic viscosity at 100°C. A higher value indicates better ability to maintain viscosity under high temperatures, which can also be interpreted as better lubrication performance in high-temperature conditions. The method for changing the engine oil in the Changan Oshan X7 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the dipstick to check that the engine oil level is within the standard range.
16
3
Share

Where is the diagnostic port of the Peugeot 3008 located?

The OBD diagnostic interface of the Peugeot 3008 is located in the fuse box area below the left side of the steering wheel. Simply pull the cover panel outward to access it. The OBD interface is the black and green socket. OBD stands for On-Board-Diagnostic, which translates to "On-Board Diagnostic System" in Chinese. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If any condition that may cause excessive emissions is detected, it will immediately issue a warning. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. At the same time, the OBD system stores the fault information in memory, which can be read in the form of fault codes through standard diagnostic tools and interfaces. Based on the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault. The Peugeot 3008 has body dimensions of 4435mm in length, 1840mm in width, and 1652mm in height, with a wheelbase of 2613mm. It is equipped with a 1.6-liter turbocharged engine, delivering a maximum horsepower of 167ps. This engine provides greater output power and torque while further improving fuel economy and reducing exhaust emissions. The Peugeot 3008 comes with a 6-speed automatic transmission, a top speed of 205 km/h, a front MacPherson strut independent suspension, and a rear torsion beam non-independent suspension. The tire specifications are 225/50R17. System Structure: Scanner: The OBD-II regulation specifies fault codes, numerous engine management sensor signals, computer commands, etc., which can be read through a universal scanning tool. Oscilloscope: Oscilloscopes come in both desktop and handheld versions. Using an analog oscilloscope to check ignition system faults has been practiced for decades, but it is entirely different from modern laboratory oscilloscopes. Traditional analog oscilloscopes require the displayed signal to be a repeating periodic signal, whereas laboratory oscilloscopes display the signal in real-time. Due to the high sampling frequency, every important detail of the signal is displayed, allowing any signal that could cause a fault to be identified while the engine is running. Interface: The OBD-II program is designed to avoid confusion between systems, requiring the use of a standard 16-pin diagnostic interface, specific coding, and component descriptions in the manufacturer's documentation to achieve uniformity and standardization. Every vehicle is equipped with a standard-shaped and sized 16-pin diagnostic interface, with each pin's signal allocation identical and located in the same position, installed below the dashboard, somewhere between the left side of the dashboard and 300mm to the right of the vehicle's centerline. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, etc. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze emission-related faults. When an emission fault occurs, the ECU records the fault information and related codes, and issues a warning through the malfunction indicator lamp to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.
18
5
Share

How to Repair a Diesel Engine Radiator Leak?

If the freshwater pump monitoring hole also shows signs of leakage, the freshwater pump should be removed from the engine body, disassembled, and the water seal replaced. For repairing the upper and lower water chambers of the radiator, after identifying the leaking area, clean the affected part thoroughly and then repair it with soldering.
5
3
Share

What to Do When the Left Reverse Parking is Too Close to the Left Side?

Turn the steering wheel one full turn plus 90 degrees to the left when there is still some distance to the parking line in the left rearview mirror. Predict whether the car body will cross the line; if you continue reversing in the current direction and the distance between the car body and the corner of the parking space is too narrow, turn the steering wheel back half a turn to widen the distance.
20
3
Share

What to Do When the Car Dashboard Water Temperature Reaches C?

When noticing the car's water temperature enters the warning zone, if the vehicle is driving at low speed, this usually indicates a cooling system issue. Find a safe location that doesn't obstruct others. While driving at high speed, if you notice the car's water temperature entering the warning zone, don't turn off the engine immediately after pulling over. Instead, let the engine idle for a while.
14
1
Share

What to Do When There Are White Particles on the Car Body Surface That Can't Be Wiped Off?

Spray and scrub vigorously at the same time. These small particles are very fine, and they may appear shiny if not noticed carefully, but you can feel them when touched or examined closely. Use clay to remove the white particles. If the issue persists for a while, you can use BOTNY sand wax to polish the paint surface.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.