What is the fuel tank capacity of the Roewe RX3?

1 Answers
DiMadeline
07/29/25 7:39pm
The fuel tank capacity of the Roewe RX3 is 48 liters. Its fuel consumption is approximately 7 liters per 100 kilometers, allowing a full tank to cover roughly 680 kilometers. Here are some details about the Roewe RX3: 1. The Roewe RX3 is a compact SUV produced by SAIC Motor, with body dimensions of 4408*1804*1651mm and a wheelbase of 2625mm. 2. Its price range is between 89,800 yuan and 135,800 yuan. The new vehicle is equipped with a 1.6L naturally aspirated engine and a 1.3T turbocharged engine. 3. The maximum power outputs are 92KW (125Ps) and 120KW (163Ps) respectively. The transmission options include an Aisin 6AT (for the 1.3T), manual (for the 1.6L), and CVT (for the 1.6L) gearbox.
Was this review help?
13
1
Share
More Forum Discussions

Is Mileage or Age More Important for Used Cars?

Age is important, but it is not the absolute determining factor. The age of a vehicle corresponds to its overall aging condition, while the mileage reflects the actual wear and tear. Below is an introduction to the impact of mileage and age on a car: 1. Impact of Age on a Car: As a car gets older, it naturally becomes more worn and may develop various usage-related issues, leading to significant wear. Therefore, to some extent, age plays a crucial role in determining the price of a used car. 2. Impact of Mileage on a Car: The mileage of a car indicates its wear and usage intensity. For most people, the annual mileage of a vehicle should be around 20,000 to 30,000 kilometers. If the mileage exceeds this range significantly, it suggests the car has been used frequently, and the engine and other components may have suffered severe wear. Purchasing such a used car could result in various problems arising shortly after acquisition.
7
2
Share

How long after applying car window tint can you roll down the windows?

You should wait 7 days after applying car window tint before rolling down the windows. After tint installation, the glass becomes tighter, and rolling down windows during this period may cause the edges of the tint film to peel or lift, potentially damaging the film. After tint application, it's recommended to park the car in a sunny location to ensure proper evaporation of moisture from the film, which helps maintain the tint's effectiveness. The newly applied window film hasn't fully adhered yet, and prolonged water exposure can reduce its adhesive properties, potentially causing the film to detach. Therefore, avoid water contact or rain exposure for the first 3 days after installation. If there are stains on the tint film, never use sharp objects to scrape or harsh chemical solvents to clean. Instead, gently wipe with a clean damp towel, sponge, or soft cloth.
15
5
Share

What vehicles can be driven with an E-class license?

An E-class license allows you to drive ordinary two-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h. Additional relevant information is as follows: 1. D-class and E-class licenses are motorcycle driving licenses, where the D-class license is for three-wheeled motorcycles. A D-class license permits driving E-class and F-class motorcycle models, while an E-class license permits driving F-class motorcycle models. 2. China's driving license categories include: A-class, B-class, C-class, D-class, E-class, F-class, M-class, N-class, and P-class. Among these, A-class and C-class are further divided into three subcategories each, and B-class is divided into two subcategories. Specifically, C1 is for manual transmission small vehicles, C2 is for automatic transmission small vehicles, and C4 covers small trucks, three-wheeled motorcycles, four-wheel agricultural transport vehicles, and three-wheel agricultural transport vehicles, among other permitted vehicle types.
8
5
Share

How to Repair Paint Cracks?

Paint cracks can be repaired by: 1. Polishing and waxing for minor cracks; 2. For more severe cracks, the entire area of the paint film needs to be sanded down until a smooth surface is exposed, followed by repainting. Paint cracks are usually very fine at the early stage but will gradually penetrate the paint until reaching the color coat layer. By the time they become visible to the naked eye, the damage is already quite severe. Prolonged exposure to sunlight is the main cause of shortened paint lifespan. Ultraviolet rays from the sun eventually lead to oxidation of the car's coating. If water droplets remain on the car body while it is exposed to sunlight, the oxidation process accelerates significantly. For minor oxidation, wax can be used to remove it. However, once oxidation becomes severe, grinding and polishing are necessary.
2
0
Share

What is the normal temperature displayed for car coolant?

Car coolant temperature displaying 90 degrees Celsius is normal. For proper operation, a car engine needs to reach a certain temperature - neither too high nor too low, as both extremes are detrimental to normal engine operation and performance. The temperature shown on the car's coolant gauge indicates the temperature of the coolant. To ensure the engine operates within the normal temperature range, vehicles are equipped with an engine coolant temperature sensor, typically displayed separately on the coolant gauge. If the antifreeze temperature becomes too high, an alarm will be triggered. After starting the car, the antifreeze temperature rises rapidly, causing the needle on the coolant gauge to reach the middle position. Once equilibrium is achieved at this point, the temperature stabilizes and won't rise further. This explains why warming up the engine is necessary after the car has been parked for some time before driving.
6
3
Share

What is the appropriate RPM after starting a car?

Generally, the engine RPM can reach 1200-1500 immediately after startup. In cold weather, the engine RPM may be even higher because a lower RPM could cause the vehicle to stall, and a slightly higher RPM helps warm up the engine faster. However, during a cold start, the RPM should not be too high either, as the lubricating oil cannot reach the upper parts of the engine. To minimize wear, keeping the RPM below 2000 is advisable. Here are some relevant details about car startup RPM: 1. RPM too high: If the RPM is excessively high, it can lead to greater engine wear, reducing its lifespan, and also increase fuel consumption. 2. RPM too low: If the RPM is too low, the fuel may not burn completely in the cylinders, leading to carbon buildup in the engine, which can cause significant damage over time.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.