What is the fuel tank capacity of the Roewe i6?

3 Answers
CarmenMarie
08/28/25 2:26am
Roewe i6 has a fuel tank capacity of 45 liters, which is the officially announced data. The Roewe i6 uses 92-octane gasoline, with a fuel consumption of 5.8-5.9L per 100 kilometers. A full tank can cover a distance of 763-776km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
Was this review help?
3
4
Share
McMicah
09/09/25 7:50am
I have been driving the Roewe i6 for three years, and its fuel tank capacity is 45 liters. My daily commute is about 20 kilometers one way, with an average fuel consumption of around 7 liters per 100 kilometers. This means a full tank can last over 600 kilometers, making it convenient to refuel once a week. When fuel prices fluctuate, I choose to refuel at night or during low-price periods to save money. On weekends, I often take my family on highway trips, where the fuel consumption drops to just over 6 liters per 100 kilometers, extending the range even further. I recommend new owners regularly check the fuel tank cap and fuel pump seals to avoid leaks or contamination that could affect fuel efficiency. It's an economical and practical choice for family commuting.
Was this review help?
12
2
Share
Expand All
Hylla
10/23/25 8:42am
As an environmentalist, I highly value the fuel efficiency of my Roewe i6. The 45-liter fuel tank may not be large, but it's efficiently matched with a 1.5T engine, achieving around 7.5L/100km in city driving with a full-tank range of approximately 600km—30% more fuel-efficient than large SUVs, thus reducing carbon emissions. I've developed the habit of gentle acceleration and minimal braking, pushing fuel consumption down to 6.8L/100km. For daily commutes, one refuel per month suffices, saving money while cutting pollution. I recommend using public transport more often and utilizing apps to monitor fuel consumption trends for long-term environmental impact reduction.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Can temporary license plates be used outside the province?

Temporary license plates can be used outside the province. The following is a detailed introduction to temporary license plates: 1. Concept: A paper motor vehicle license plate that permits temporary road use of a motor vehicle, also known as a temporary driving license plate. It refers to a temporary vehicle driving certificate issued by the vehicle management department of the public security bureau before the new vehicle is officially registered. 2. Validity period: The validity period will be indicated on the temporary license plate, which can be 15, 30, or 90 days. The temporary license plate must be used within the validity period. If the formal license plate has not been obtained after the expiration of the validity period, it must be reapplied, but the number of applications cannot exceed three times. 3. Placement method: If there is one temporary license plate, it should be placed at the lower left or right corner of the front windshield, which does not affect the driver's line of sight. If there are two temporary license plates, one should be placed on the front windshield, and the other should be placed at the lower left corner of the rear windshield inside the car.
13
1
Share

What does the blue section in navigation mean?

Navigation's blue sections indicate areas without real-time traffic information. Below are relevant introductions about navigation: 1. Introduction: Navigation is a research field focusing on monitoring and controlling the movement of processes or vehicles from one place to another. All navigation technologies involve locating the navigator's position by comparing it with known locations or patterns. In a broader sense, navigation can refer to any skill or study involving determining position and direction. In this sense, navigation includes orienteering and pedestrian navigation. 2. Categories: The field of navigation includes four general categories: land navigation, marine navigation, aeronautical navigation, and space navigation. 3. Color meanings: Blue sections on navigation represent areas without real-time traffic information, red indicates severe congestion, yellow shows congestion, and green means smooth traffic flow.
15
0
Share

What is the reason for the rustling noise in the Festa steering wheel?

The reasons for the noise in the steering wheel are: 1. The sound from the rebound clip after the turn signal: It makes a noise when turning the steering wheel clockwise, and it makes three sounds per full rotation. The noise disappears when the turn signal is turned off. 2. The noise from the steering column dust cover: A lack of lubrication in the steering column dust cover can cause dry friction noise. Applying some lubricant inside the dust cover will eliminate the sound. More related information is as follows: 1. Introduction to the steering wheel: The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. 2. Function of the steering wheel: The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft.
15
2
Share

Does replacing front and rear windshields significantly devalue a car?

Replacing front and rear windshields does not significantly devalue a car. The impacts of replacing windshields: 1. Waste: New sun films need to be applied to the front and rear windshields, which costs money and time. 2. Risks: If the installation technique is inadequate, gaps in details may lead to increased noise during high-speed driving or abnormal sounds from the windshields when passing over bumpy roads. Precautions after replacing windshields: 1. Avoid washing the car: Do not wash the car for three days, and do not remove the fixed tapes on the windshields. 2. Develop good driving habits: Avoid sudden braking and high-speed driving on bumpy roads to prevent the impact from displacing the windshields. 3. Minimize window opening: Try to open windows less to prevent the windshields from being displaced by wind pressure.
20
4
Share

What are the repair methods for car scratches?

Here is a detailed introduction to car scratch repair methods: 1. Toothpaste: Toothpaste itself has a grinding function, equivalent to applying a layer of wax, thus achieving a good repair effect. However, toothpaste repair is only suitable for minor marks. 2. Touch-up paint pen: Using a touch-up paint pen can cover some small and shallow scratches, making the marks less noticeable. There is a certain gap compared to the original factory paint, with color differences, and the touch-up pen can only perform local touch-ups. 3. Car paint scratch repair agent: The repair agent has a grinding effect and can quickly repair the damaged part of the car paint, fixing minor scratches.
4
2
Share

What is the fuel consumption of the BAIC Huansu S6?

The average fuel consumption of the BAIC Huansu S6 is 7.5L/100km. Below is a detailed introduction to the BAIC Huansu: 1. Overview of BAIC Huansu: BAIC Huansu, as an independent passenger vehicle product brand under BAIC's Southwest Base, covers a range of passenger vehicles including SUVs, MPVs, CROSS, and sedans. The product development is based on the patented technology platform of Saab Automobile from Sweden, incorporating years of cooperation experience and technical accumulation from Beijing Benz and Beijing Hyundai. The product series includes MPVs, SUVs, and other multi-purpose passenger vehicles. 2. Constant-speed fuel consumption: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.