What is the fuel tank capacity of the Prado in liters?

Why is the car's one-button start not working?

Here are the reasons why the car's one-button start sometimes does not respond: 1. Check if the key is nearby, as the one-button start relies on key sensing. The car cannot start if the key is not present. 2. Verify if there was an operational error. If you only press the button without stepping on the brake, the car will power on, but the engine will not start. Another scenario is not holding the button long enough or not pressing it all the way down. 3. The gear is not in the P (Park) position. "Sensing issues": 1. Frequently placing the car key near electronic devices such as mobile phones, computers, or TVs may interfere with the low-intensity radio waves in the key. Alternatively, strong radio waves from nearby sources like TV towers, airports, or power plants can cause the one-button start to "fail." 2. The car key battery is low: If the remote control distance shortens or the sensing becomes less responsive, it indicates the car key battery is running low. In this state, the one-button start function will not work properly, and the battery should be replaced as soon as possible. 3. Car malfunction: In extreme cases such as fuel system issues, dead battery, or short circuits in electronic components, contact the 4S store staff directly.

5

4

Share

Is a Four-Wheel Alignment Necessary After Changing Tires?

Generally, a four-wheel alignment is required after changing tires. The functions of four-wheel alignment for vehicles: 1. Significant benefits for tires: After a four-wheel alignment adjustment, the tires can maintain the optimal angle with the vehicle body, ensuring both improved grip and comfort. 2. Enhanced handling: After a four-wheel alignment adjustment, driving control can be correspondingly ensured. In emergency situations, sufficient tire grip allows the vehicle to follow the driver's intended path as closely as possible. 3. Fuel savings: After a four-wheel alignment adjustment, the vehicle can travel along the correct path, reducing wind resistance to some extent and consequently lowering fuel consumption. 4. Ensured driving safety: During a four-wheel alignment adjustment, the condition of the vehicle's suspension system and other components is also checked. This inspection can determine whether the tires have any adverse effects on the chassis system.

19

4

Share

Can You Still Drive After the Car Overheats?

When the engine temperature is too high, you must stop the car immediately for inspection and must not continue driving. Otherwise, it can easily damage the engine, even requiring major repairs. To determine if the car is overheating, check three things: 1. The temperature gauge. 2. The temperature warning light. 3. Whether there is steam coming out. The temperature warning light should be given special attention because it is more noticeable and easier to see—it will light up first before the car overheats. Common reasons for overheating include: 1. Insufficient coolant. This should be checked first and is basically the only thing you can inspect yourself. If you are on the highway or in a remote area without coolant, you can temporarily use water as a substitute. 2. A dirty radiator. The radiator has many pores formed by cooling fins, which can easily accumulate debris, sludge, and other deposits, reducing airflow and cooling efficiency.

13

2

Share

Is Crystal Coating Harmful to Car Paint?

For a new car, crystal coating does not cause damage to the paint surface; however, for a car that has been used for some time, crystal coating can potentially harm the car paint. For a new car, crystal coating only requires deep cleaning of the paint surface, followed by mirror restoration, degreasing treatment, and then applying the crystal coating directly. Since the paint surface of a new car has fewer contaminants and almost no scratches, the process is relatively quick. For a car that has been used for some time, the paint surface must first undergo polishing, followed by mirror restoration, degreasing, and finally, the crystal coating application. Due to various environmental factors causing different degrees of damage to the vehicle, it is essential to remove any contaminants or scratches from the paint surface beforehand to ensure it is smooth, allowing the crystal coating to achieve the best results. Benefits of Crystal Coating: Scratch Resistance: The high hardness of diamond crystals prevents most minor scratches and possesses elastic recovery capabilities. Corrosion Resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint surface from the external environment, effectively preventing oxidation and acid rain corrosion. No Cracking: Diamond crystals are resistant to UV rays, extreme temperatures, and strong temperature variations, preventing cracking or peeling. Easy Cleaning: The robust fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect, making it easier to clean and maintain. Anti-Static: Diamond crystals contain anti-static agents, reducing dust adhesion to the paint surface. Enhanced Shine: The crystal structure of diamond crystals, similar to that of diamonds, increases light refraction, resulting in a brighter and more translucent paint surface.

9

4

Share

Where are the accelerator and brake located in an automatic transmission car?

In an automatic transmission car, both the brake and accelerator are located under the foot. The accelerator is on the far right, and the brake is immediately to its left, both controlled by the right foot. More detailed information is as follows: 1. When a person presses the brake or accelerator, the body needs support to maintain balance. When the right foot presses the pedal, the left foot can stabilize the body on the floor. If both feet are placed on the brake and accelerator separately, both feet are in a semi-suspended state without a stable point of force, which can easily lead to instability when pressing the accelerator or brake. 2. In an emergency, if both feet are placed on the brake and accelerator, there is a high chance of making a wrong judgment, such as mistaking the accelerator for the brake. Assigning control of both the brake and accelerator to one foot significantly reduces this possibility and also lowers the vehicle's lateral slip coefficient when braking while pressing the accelerator. 3. If the brake in an automatic transmission car were placed where the clutch is in a manual transmission car, with the right foot pressing the accelerator and the left foot pressing the brake, the safety coefficient might improve.

17

3

Share

Where is the engine number of FAW Besturn B90 located?

The engine number of FAW Besturn B90 is located on the top of the engine in the engine compartment. It is a continuous combination of numbers and letters. To find it, you need to open the vehicle's engine hood. The specific steps are as follows: 1. Open the driver's door. 2. Pull the hood release lever located on the left side of the driver's leg area. 3. Lift the engine hood upwards. 4. Use the support rod to secure the hood in place, ensuring it is firmly supported to avoid any hazards. 5. The engine number is located on the top of the engine. Note: Do not open the engine hood in windy weather as strong winds may cause the hood to flip excessively. Always open the engine compartment when the engine is turned off to avoid injuries from moving parts such as the pulley.

18

3

Share

What is the fuel tank capacity of the Prado in liters?

Why is the car's one-button start not working?

Is a Four-Wheel Alignment Necessary After Changing Tires?

Can You Still Drive After the Car Overheats?

Is Crystal Coating Harmful to Car Paint?

Where are the accelerator and brake located in an automatic transmission car?

Where is the engine number of FAW Besturn B90 located?

Has the Cadillac ATS-L been discontinued?

What are the symptoms of a faulty fan clutch?

How to Read the Gauge on an Automotive Air Conditioning Pressure Meter?

What does TRIP-A mean on a car?