What is the fuel tank capacity of the Polo Jinqing in liters?

2 Answers
StKylie
07/29/25 1:12am
The fuel tank capacity of the Polo Jinqing is 45 liters. It was jointly developed by the Shanghai Volkswagen development team and the Wolfsburg team in Germany. In terms of body dimensions, the Polo Jinqing measures 4176mm in length, 1650mm in width, and 1465mm in height, with a wheelbase of 2465mm. The Polo Jinqing is equipped with a 1.4L engine that can reach a top speed of 172 km/h, while the 1.6L version can achieve a top speed of 188 km/h. The Polo Jinqing features excellent chassis tuning, ensuring smooth driving performance. It provides comfort and safety even on uneven road surfaces, with strong tire grip during high-speed cornering, delivering a comfortable and smooth driving experience.
Was this review help?
16
3
Share
RachelMarie
08/12/25 5:20am
The fuel tank capacity of the Polo GTI is quite practical, with an original design of 45 liters. This capacity is just right for a compact hatchback. For daily commuting, a full tank can run about 500 kilometers. It's recommended not to wait until the fuel gauge light comes on to refuel, as the fuel pump dissipates heat better when submerged in fuel for a long time. A friend of mine fills up to the gun twice before a highway trip, rounding up to about 46-47 liters, but this isn't very friendly to the carbon canister in the fuel tank. If you're on a long trip with few gas stations along the way, it's more reassuring to keep two bottles of additive in the car.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What Causes Motorcycle Vibration?

Motorcycle vibration can be caused by the following reasons: 1. Poor engagement of the rear clutch. When the engine speed increases, the shoe should properly grip the clutch bell. If this bothers you, simply replace the rear drive plate at a repair shop. 2. A loose belt in a scooter-type motorcycle may cause weak starting power and body vibration. Try replacing the belt, and while doing so, check if the centrifugal transmission is worn out. 3. Engine vibration may occur due to loose engine mounting screws or a broken frame. Inspect the engine mounting screws, front sprocket, sprocket seat, wheel bearings, and sprocket cushioning areas. 4. Excessive wear or dust accumulation in the drive belt pulley. Remove it to clean the dust, check if the pulley shoes are heavily worn or if the return springs are broken. Lightly sand the shoe surfaces with a flat file and reassemble for testing.
18
2
Share

What type of gasoline should be used for the Q3?

Audi Q3 uses 92-octane gasoline. Below is relevant information: Introduction to 92-octane gasoline: 92-octane gasoline has an octane rating of 92 and a heptane rating of 8, making it suitable for mid-range vehicles (with relatively low compression ratios). On December 18, 2013, the General Administration of Quality Supervision, Inspection and Quarantine and the Standardization Administration of China jointly issued the fifth-phase national standard for automotive gasoline. Introduction to the Audi Q3: The interior inherits Audi's consistent style with a reasonable layout; it is well-equipped with a strong sense of technology; the digital dashboard is clearly indicated; the materials are of good quality, and the craftsmanship is relatively refined; the interior color schemes are diverse, offering a wide range of choices.
5
3
Share

What is the issue when all dashboard lights are on?

All indicator lights being on indicates a system power deficiency. Pay attention to checking the battery power. Below are relevant explanations: 1. The instrument panel, a rigid flat plate or structural component used for installing instruments and related devices. It can be categorized by type into screen-type instrument panels, frame-type instrument panels, channel-type instrument panels, and cabinet-type instrument panels. 2. When the vehicle performs a self-check, this indicator light will illuminate, and it will automatically turn off after starting the car. If the indicator light remains on after the car is started, it is alerting you to a problem with the battery, suggesting it should be inspected or replaced. 3. The fuel indicator light signals insufficient fuel. When this light is on, it means the fuel is nearly depleted. Generally, from the time this light comes on until the fuel is completely exhausted, the vehicle can still travel approximately 50 kilometers.
7
0
Share

What is the normal power generation output of a car?

Car alternator normal power generation output is between 12.6 volts and 14.5 volts. Here are the specific details: 1. Concept: Car battery, also called storage battery, is a type of battery that works by converting chemical energy into electrical energy. The battery referred to here is a lead-acid battery, which is mainly composed of lead and its oxides, with sulfuric acid solution as the electrolyte. 2. Working principle: It uses lead plates filled with spongy lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22~28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead at the negative electrode undergoes oxidation reaction and is oxidized to lead sulfate; lead dioxide at the positive electrode undergoes reduction reaction and is reduced to lead sulfate.
11
0
Share

What are the functions of an AC contactor?

The functions of an AC contactor are: as an actuating element, it is used to connect and disconnect circuits, or frequently control the operation of equipment such as electric motors. The following is relevant information: An AC contactor can be considered as an intermediate control element, with the advantage of frequently connecting and disconnecting circuits, generally using small current or voltage to control large current or voltage. When working in conjunction with a thermal relay, it can provide certain overload protection for load equipment. The working principle of an AC contactor: 1. When the coil is energized, the static iron core generates electromagnetic attraction, which pulls in the moving iron core. Since the contact system is linked with the moving iron core, the moving iron core drives three moving contact pieces to operate simultaneously, closing the contacts and thereby connecting the power supply. 2. When the coil is de-energized, the attraction disappears, and the moving iron core linkage part separates due to the reaction force of the spring, causing the main contacts to open and cutting off the power supply.
2
4
Share

Can You Still Drive When the Car Indicates Low Coolant?

It is recommended not to continue driving. Although the car can still operate with insufficient coolant, it won't go far. Prolonged driving will cause the engine temperature to rise increasingly higher, and without coolant for cooling, it is easy to experience overheating. In severe cases, it may even cause engine damage. Relevant information is as follows: 1. If you find that your car's engine coolant is insufficient, you can refill it yourself. You need to purchase the same brand and model of coolant as the original. If different, you must drain the original coolant completely before adding the new one. Different brands and models of coolant may have different formula compositions. If mixed, various chemical components may react, affecting the antifreeze's performance. 2. Do not use water as a direct substitute for coolant. Water boils easily, producing large amounts of steam, which severely impacts cooling effectiveness. Additionally, water has a high freezing point, making it prone to freezing. Water contains impurities and ions, which over time can form scale, leading to blockages.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.