What is the fuel tank capacity of the Peugeot 508 in liters?

2 Answers
Luis
09/09/25 3:28am
The fuel tank capacity of the Peugeot 508 is 70 liters. Below is a related introduction to the Peugeot 508: Exterior: When introduced to China, to better suit Chinese consumers' pursuit of comfort and preference for larger vehicles, the body and wheelbase were lengthened, significantly improving rear passenger space. These models have also achieved good sales. Features: One characteristic of the Dongfeng Peugeot 508 is its rich configuration, especially evident in the two higher-end models. These higher-end models are equipped with features such as an electric sunroof, cruise control system, four-zone automatic air conditioning, a wide-screen multimedia navigation system, Info-Drive system integrated control knob, Bluetooth hands-free phone, and an 8-speaker system.
Was this review help?
8
5
Share
RichardAnn
09/20/25 8:17am
As a seasoned Peugeot 508 owner for five years, I'm deeply impressed by its 58-liter fuel tank capacity. It performs exceptionally well on long-distance trips, with a full tank easily covering around 650 kilometers, completely eliminating the hassle of frequent refueling stops. I've compared it with my friend's Toyota Camry's 60-liter tank, and found the 508's design more compact yet practical. A full tank lasts me a whole week for urban commuting, while on highways I recommend keeping at least a quarter tank to protect the fuel pump system and extend its service life. I always opt for premium 95-octane gasoline from reputable brands to maintain optimal engine performance. During maintenance, don't forget to check the fuel cap's seal to prevent impurities from entering – these small details ensure a more worry-free driving experience.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Does the FAW-Volkswagen Tacqua have a particulate filter?

Volkswagen Tacqua meets the China VI emission standard. It is equipped with a particulate filter. A particulate filter is a ceramic filter installed in the diesel engine emission system, which can capture particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine exhaust particulate trap through a dedicated pipeline. After passing through the densely arranged bag-type filters inside, the carbon smoke particles are adsorbed on the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, burning off the carbon smoke particles adsorbed on it and turning them into harmless carbon dioxide. To check whether the FAW-Volkswagen Tacqua is equipped with a particulate filter, you can use the following three methods: Check the "Owner's Maintenance Manual" and "Owner's User Manual" to see if there is a particulate filter function. In addition, you can carefully check the fault codes in the manual to see if there is a "particulate filter" fault light indicator; Check the label above the oil filler cap. If the oil cap clearly indicates 0W-20 grade oil, it means it is equipped with a particulate filter; Check whether there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If there is, that is the particulate filter.
5
0
Share

What is the reason for all the windows of the Brilliance Junjie malfunctioning?

Brilliance Junjie windows all malfunctioning is mostly due to program disconnection, and restoring the initial program can solve the problem. Here are the recovery measures: 1. Initialize the windows: Turn on the ignition switch, pull the switch up and hold it, after the glass rises to the top, continue to hold for more than 3 seconds, release the switch and immediately press and hold it again to lower the glass to the bottom and wait for more than 3 seconds, then repeat the rising action once more. The initialization program is completed, and the window lifting function is restored; 2. Remove dirt: Wrap chopsticks with wet wipes and insert them into the glass guide slot. Adjust the number of towel layers wrapped around the chopsticks according to the width of the guide slot to ensure moderate thickness. Use force to move up and down inside the guide slot for cleaning, and continuously remove the towel for cleaning until no dirt comes out; 3. Apply lubricant or replace the rubber strip: Most cases of windows not lifting are caused by mechanical jamming. After cleaning the guide rail, applying some lubricating oil will suffice. If the malfunction is caused by aging or deformation of the glass rubber strip, then a new sealing strip needs to be replaced. If the sealing strip is too dirty, simply clean it. Spray some dashboard wax on the glass sealing strip, or apply talcum powder (to lubricate), and it will take effect.
20
4
Share

Can leak sealant be used for minor car AC leaks?

Leak sealant should not be used for minor car AC leaks. Here are relevant explanations about using sealants for AC micro-leaks: 1. Reason: There is no so-called "leak sealant" that works for vapor compression refrigeration system pipelines. Since the refrigerant in these pipelines is in a flowing state with constantly changing pressure and temperature values, conventional leak sealants cannot provide effective sealing. 2. Precautions: When refrigerant leaks occur in vapor compression refrigeration systems, they should be repaired by brazing. Products like "leak sealants" or "leak repair agents" must not be used.
18
0
Share

What to Do If the Vehicle Identification Plate Is Damaged?

Carry the relevant documents to the vehicle's 4S store for a replacement. Below is relevant information about the vehicle identification plate: 1. Function: The production time can be determined by consulting the user or checking the vehicle identification plate, as the production time of the vehicle is always indicated on the plate located in the driver's compartment. 2. Location: The vehicle must be equipped with a product identification plate, placed in an easily observable position at the front of the vehicle. For buses, the plate is located above the front passenger door inside the vehicle. 3. Significance: Check the production plate to confirm information such as the vehicle's displacement and production date, and also check for any signs of tampering or scratches on the plate, as many vehicles have their production plates installed in places that are not easily bumped.
17
2
Share

What to Do When Car AC Makes Loud Buzzing Noise with Weak Airflow at Maximum Setting?

Adjust the fan speed setting, check the air outlet mode, and inspect whether the air vents or ducts are blocked. Below is relevant information about car air conditioning systems: 1. AC Composition: Modern air conditioning systems consist of refrigeration systems, heating systems, ventilation and air purification devices, and control systems. 2. Working Principle: Automatic AC functions include automatic adjustment of interior temperature and humidity, automatic control of air recirculation and supply modes, as well as operation mode and air exchange volume control. The electronic control unit will automatically operate the AC system based on settings made by the driver or passengers via buttons on the AC display control panel, and timely adjust air supply temperature and speed according to signals from various sensors to maintain optimal in-vehicle air conditions.
9
1
Share

How to Force Open a Motorcycle Fuel Tank Lock?

Use a flat-head screwdriver to forcefully insert and damage the lock core, then slowly twist it in the unlocking direction. Afterward, you can use a flat-head screwdriver to pry open the two locking tongues on either side. Below is relevant information about fuel tank locks: 1. Composition: The lock body and locking mechanism of an automobile fuel tank cap lock are entirely enclosed within the fuel tank body, ensuring high safety and reliability. The fuel tank cap lock mainly consists of components such as the lock body, lock core, dust cover, torsion spring, spring plate, and transmission bar. 2. Principle: When the fuel tank needs to be opened, use the key to counterclockwise flip open the dust cover and insert it into the lock core, then turn it clockwise by 135°. The eccentric pin shaft at the head of the lock core drives the transmission bar to move, causing the transmission bar to retract and no longer be obstructed by the positioning block on the fuel tank. The fuel tank cap can then be pulled upward to open. When the fuel tank needs to be locked, align the three elastic claw plates on the fuel tank cap with the three notches on the fuel tank core tube, press down by hand, and rotate clockwise until resistance is encountered. Then, turn the key counterclockwise by 135°, inserting the transmission bar into the positioning block between the fuel tank cores to block the rotation of the fuel tank cap, achieving the locking effect. After removing the key, the dust cover automatically returns under the action of the torsion spring.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.