What is the fuel tank capacity of the Peugeot 508 in liters?

2 Answers
StCharles
09/03/25 5:08am
The Peugeot 508 has a fuel tank capacity of 70 liters. Below is a related introduction to the Peugeot 508: Introduction: The Peugeot 508 is the mass-produced version of the concept car C5 by Peugeot, which was exhibited at the 2010 Beijing Auto Show. It shares the same platform as the Citroen C5, which has already been introduced to the domestic market. Concept: Before introducing the 508, Dongfeng Peugeot conducted research on the Chinese market, taking into account the higher demand for rear seat space among Chinese consumers. Therefore, when the Dongfeng Peugeot 508 was introduced, it followed the example of other European models by lengthening the body and wheelbase to ensure a more spacious rear seating area, meeting the needs of Chinese consumers.
Was this review help?
18
4
Share
OLillian
09/15/25 6:40am
I've been driving the Peugeot 508 for several years, and its fuel tank capacity is approximately 60 liters. For city driving with short daily commutes and higher fuel consumption, this capacity allows me to go for about four to five days. On the highway, the range can reach around 600 kilometers, so I don't have to worry about frequently looking for gas stations during long trips. I always choose to fill up the tank when refueling, which saves both time and money. There are slight variations in tank capacity across different model years; for example, the diesel version might be a few liters smaller, but overall, it's quite convenient to use. In terms of design, the fuel tank is well-positioned, not affecting trunk space or the driving experience. For maintenance, I regularly check the fuel gauge to ensure accuracy and avoid any unexpected issues on the road. Overall, I find 60 liters to be a good balance, sufficient for household use and hassle-free.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Where to Insert the Music USB Drive in a Subaru Forester?

The Forester comes in many models, and the location of the USB-AUX interface varies by configuration. Generally, it is located below the center armrest, where the USB-AUX car charger port is also situated. Relevant details are as follows: 1. Body dimensions: The Subaru Forester measures 4560mm in length, 1780mm in width, and 1700mm in height, with a wheelbase of 2615mm. 2. Powertrain: The Subaru Forester is equipped with a 2.0-liter naturally aspirated engine in a horizontally opposed configuration. The pure gasoline version produces a maximum horsepower of 156 HP, while the mild hybrid version delivers a maximum horsepower of 145 HP.
18
2
Share

What Causes Car Steering Wheel Shaking?

Car steering wheel shaking can be caused by: 1. Issues with the rubber bushings of the steering wheel transmission device; 2. Loose bolts securing the steering wheel transmission device; 3. Problems with engine idling or the steering gear; 4. Shock absorber malfunction; 5. Frame deformation; 6. Excessive backlash in the drive gear; 7. Overheated brake discs or brake pads. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver on the steering wheel edge into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and installation clips or screw holes corresponding to the driver's airbag (DAB).
4
1
Share

How many liters of engine oil does the BMW 730 require?

BMW 730 requires 6.5 liters of engine oil. Generally, car engines have an oil dipstick. When adding oil, it should be filled between the maximum (upper limit) and minimum (lower limit) marks. Engine oil is the lubricant used by the engine, composed of base oil and additives. It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber, earning it the reputation as the 'blood' of the car. The BMW 730 has dimensions of 5273mm in length, 1902mm in width, and 1498mm in height, with a wheelbase of 3210mm. The engine in this car delivers a maximum horsepower of 265Ps, a maximum power of 195kW, and a maximum torque of 400Nm.
4
3
Share

What is the fuel consumption of the old Teana 2.3?

The average fuel consumption of the old Teana 2.3 is 9.9 liters per 100 kilometers. Here is some related information about fuel consumption: 1. Habits and road conditions: Fuel consumption is greatly related to driving habits and road conditions. Avoid heavy acceleration, and gradual acceleration when starting is the most fuel-efficient. To save fuel, avoid pressing the accelerator heavily when starting, as heavy acceleration consumes 2 to 3 times more fuel than normal acceleration. 2. Braking: Maintaining a safe distance and avoiding frequent braking saves more fuel. If you don't keep a safe distance, you will often need to brake on the road. When braking, the gear of an automatic transmission car will drop, and the car will have to shift up from a lower gear again. Starting from a standstill or in a low gear requires the engine to consume more fuel.
16
3
Share

What is the function of installing a shark fin on a car?

Installing a shark fin on a car can enhance signal reception. Functional shark fin antennas need to be connected to the car's internal wiring and can integrate various powerful automotive electronic functions such as FM, GPS, and GSM, replacing and surpassing the traditional rod antennas. Decorative shark fin antennas can release static electricity and enhance signal reception. The installation steps for a shark fin antenna are as follows: 1. Wrap the shark fin antenna with 3M tape around the edge, ensuring it is as flat as possible; 2. Remove the light on the rear seat of the car and take off the antenna base; 3. Determine and mark the correct position for the shark fin antenna; 4. Apply glue around the inner edge of the installation position, then peel off the tape on the shark fin antenna and align it to the marked position for attachment; 5. After installation, secure the shark fin with tape and remove the tape after 24 hours.
17
3
Share

How many air filters does the BYD S7 have?

The BYD S7 has one air filter located behind the glove compartment, as well as an engine air filter situated on the right side of the engine. The steps to remove the BYD S7 air filter are as follows: 1. Unscrew the two plastic screws on both sides of the glove compartment; 2. Remove the damping buckle on the right side of the glove compartment and detach the plastic panel; 3. After removing the plastic panel, you will see a blue wire and a white wire—disconnect the plugs of these two wires to remove the air filter. The BYD S7 measures 4835mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2730mm. The vehicle's engine delivers a maximum horsepower of 154Ps, a maximum power of 113kW, and a maximum torque of 240Nm.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.