What is the fuel tank capacity of the Peugeot 307 in liters?

2 Answers
EthanRose
09/08/25 7:28am
The fuel tank capacity of the Peugeot 307 is 60 liters. Nominal capacity: The fuel tank capacity varies for each vehicle model. However, most automobile manufacturers follow a general principle that a full tank of fuel typically supports a driving range of approximately 600 kilometers, and not less than 500 kilometers. The nominal capacity is usually smaller than the actual refueling volume because manufacturers reserve some space in the nominal capacity to allow for fuel expansion when temperatures rise, preventing overflow from the tank. Fuel tank capacity (L): The size of the fuel tank capacity measures a vehicle's ability to carry fuel. A larger fuel tank capacity means more fuel can be stored, resulting in longer and stronger driving range, allowing the vehicle to travel farther and reducing the frequency of refueling. A larger fuel tank also enables the vehicle to reach more distant gas stations in areas where stations are not densely located, avoiding the risk of running out of fuel and being stranded.
Was this review help?
19
4
Share
McJaxon
09/20/25 5:56am
I've been driving a Peugeot 307 for several years, and I remember clearly that its fuel tank capacity is 60 liters. When fully fueled, it can run about 450 kilometers in the city, and up to 550 kilometers on the highway, depending on road conditions and driving habits. I usually pay attention not to overfill the tank to prevent fuel leakage or burdening the fuel pump, especially when refueling a hot car in summer. Once, I overfilled it and fuel leaked everywhere, so I learned my lesson and always stop at the safety line now. As an experienced driver, I suggest planning refueling stops before long trips, making the 60-liter tank neither a burden on range nor difficult to manage. Overall, the fuel tank design of this car is very reasonable, suitable for daily commuting and weekend outings. Remember to regularly check the fuel tank cap seal to prevent rainwater from seeping in.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What Documents Are Required for Point Deduction?

To deduct points, you need to bring your original resident ID card and the original vehicle registration certificate. According to the new regulations on driver's license point deduction effective from March 1, 2018, you must submit your personal identity proof and the original driver's license, along with the original resident ID card and vehicle registration certificate of the vehicle owner to whom the license is bound. The calculation method for the driver's license point accumulation cycle is as follows: 1. The cycle starts from the day the driver's license is first issued, with each cycle lasting 12 months. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," Article 65, the accumulation cycle for traffic safety violations (i.e., the point cycle) is 12 months, with a full score of 12 points, calculated from the date the driver's license is first issued; 2. Based on the severity of the traffic safety violation, the points deducted at one time can be: 12 points, 6 points, 3 points, 2 points, or 1 point; 3. Article 66 states that for a motor vehicle driver's traffic safety violations, penalties and point deductions are executed simultaneously. If a motor vehicle driver commits more than one violation at a time, the points should be calculated separately and accumulated.
4
3
Share

Can I Register a Car in Another City?

There are no regional restrictions for registering a new car; it can be registered in another city. According to relevant national regulations, as long as the vehicle has a legitimate invoice, certificate of conformity, has paid the purchase tax and compulsory traffic insurance, and the purchase channel is legal and compliant with all national standards, the vehicle can be registered. Below are the relevant details: 1. Required documents: Motor vehicle certificate of conformity; car purchase invoice; compulsory traffic insurance certificate; vehicle purchase tax certificate; ID card; residence permit. 2. Steps for registering a new car in another city: (1) Prepare all the necessary documents for registering the new car (especially ensure you have a residence permit for the registration location—wait until you obtain the residence permit before purchasing the car); (2) Apply for a temporary license plate for the new car. Note: If the registration requires cross-province travel, you must apply for a cross-province license plate; (3) Purchase insurance for the new car. Since driving a new car involves accident risks, to minimize your risk and potential losses, wait until the insurance takes effect before traveling to another city for registration; (4) Once the insurance is active, bring all the documents and drive the new car to the registration location. First, pay the vehicle purchase tax there, then take the tax payment receipt and other documents to the vehicle management office to complete the registration process.
11
1
Share

What does dual-clutch transmission mean?

Dual-clutch transmission (DCT) operates with two sets of clutches working simultaneously, where one set manages the odd-numbered gears and the other controls the even-numbered gears. Commonly abbreviated as DCT due to its dual-clutch design, many people simply refer to it as a dual-clutch transmission. The clutch, positioned between the engine and the transmission, acts as a 'switch' for power transfer from the engine to the transmission. It is a transmission mechanism capable of both transmitting and cutting off power, primarily ensuring smooth vehicle starts, reducing impact loads on transmission gears during gear shifts, and preventing overload in the drivetrain. In conventional vehicles, gear shifts are achieved through the engagement and disengagement of the clutch, which temporarily interrupts power transmission during the transition.
12
2
Share

What Causes a Gasoline Engine to Shut Down When Overheated?

Gasoline engine shutdown due to overheating may be caused by excessively small valve clearance. The maintenance methods for automobile engines are as follows: 1. Use lubricating oil of appropriate quality grade: For gasoline engines, SD-SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, CB-CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. 2. Regularly change the oil and filter: The quality of any grade of lubricating oil will change during use. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level (generally up to the upper limit of the oil dipstick). 3. Maintain good crankcase ventilation: Most gasoline engines are now equipped with a PCV valve (Positive Crankcase Ventilation), but pollutants from blow-by gases can deposit around the PCV valve, potentially clogging it. Therefore, it is necessary to regularly clean the pollutants around the PCV valve. 4. Regularly clean the crankcase: During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Therefore, the crankcase should be cleaned regularly to maintain cleanliness inside the engine.
1
0
Share

Can People with Complete Color Weakness Obtain a Driver's License?

People with complete color weakness can obtain a driver's license. The following precautions should be noted when taking the driver's license test: 1. Ensure ventilation: Open the car doors to let air circulate before getting in. During lunch breaks, training cars parked in the open can become extremely hot and stuffy. About 10 minutes before training, all doors should be opened to let the heat escape and allow air to flow freely. 2. Choose the right time: Select suitable times for driving practice. In summer, days are longer and nights shorter. Although the days are long, they can be unbearably hot. The recommended best times for practice are from 08:00 to 12:00 in the morning and from 17:00 to 21:00 in the evening (closing around 21:00). Firstly, the temperature is not as scorching as at noon, making it more bearable for learners. Secondly, working professionals may not have time during the day but can make use of the ample time in the evening. Lastly, practicing at night helps familiarize learners with using car lights, making it easier to handle the night driving test later. 3. Take breaks every 30 minutes: It's essential to prevent heatstroke during summer driving practice. The most important aspects are lowering body temperature and ensuring you remain alert while learning. Therefore, take a break in a shaded rest area every 30 minutes of practice. If you feel unwell during practice, inform the instructor immediately.
8
2
Share

How to Open the Engine Oil Tank Cap?

The method to open the engine oil tank cap is: rotate it 90 or 180 degrees clockwise or counterclockwise to open. Engine oil is referred to as the blood of the engine, and it plays a crucial role in the engine by lubricating, cleaning, sealing, and dissipating heat. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The main functions of engine oil are to reduce friction and wear on moving parts, remove sludge (one of the functions of dispersants) and varnish (detergents) from the engine, neutralize acids produced from fuel and lubricant oxidation (detergents), improve the sealing of piston rings, and cool the engine by carrying away heat from moving parts.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.