What is the fuel tank capacity of the old Volkswagen Santana in liters?

1 Answers
MakaylaLynn
07/29/25 9:36am
The fuel tank capacity of the old Volkswagen Santana is 52.8 liters. This data is officially published, and owners who have purchased the old Santana can also check it on the vehicle's configuration sheet. The fuel grade for the old Santana is 92 octane, with a fuel consumption of 5.5-5.6L per 100 kilometers. A full tank can cover a distance of 942-960km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. It is advisable to refuel when the fuel gauge shows 2 segments remaining to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing from the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.
Was this review help?
6
4
Share
More Forum Discussions

What are the trunk dimensions of the Great Wall Haval H6?

Haval H6 trunk dimensions are 720mm, 1030mm, and 840mm respectively. Below is more information about the Haval H6: 1. Vehicle dimensions: The Haval H6 is a 5-door, 5-seat compact SUV with a body length, width, and height of 4615mm, 1860mm, and 1720mm respectively, a wheelbase of 2680mm, and a curb weight of 1675kg. 2. Suspension: The Haval H6 features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. 3. Powertrain: It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 210nm, paired with a 6-speed manual transmission.
14
1
Share

What are the disadvantages of a body-on-frame structure?

The following are the disadvantages of a body-on-frame structure: 1. The body-on-frame structure is relatively bulky, heavy, and tall, typically used in trucks, buses, and off-road vehicles. Some high-end sedans also use it because it offers better stability and safety. 2. The body and frame are rigidly connected, which can lead to less smooth driving on highways and may cause vibrations. 3. In dangerous situations (such as a rollover), the heavy chassis can pose a fatal threat to the relatively weaker body (a unibody structure does not encounter this issue as its body is integrated). Additional information: The advantage of a body-on-frame structure is that it has an independent frame, providing higher chassis strength and better resistance to bumps. Additionally, uneven forces on the four wheels are borne by the frame and not transmitted to the body. This is why SUVs and off-road vehicles often use this structure.
3
0
Share

How to Deal with Scratched Paint on a White Car?

The methods to deal with scratched paint on a white car are: 1. Use scratch wax to gently polish the scratched area, which can simply fix the paint issue. 2. Purchase a touch-up pen that matches the car's color and apply it to the scratch to cover the unsightly damage. 3. Use nail polish that is similar in color or transparent to fill and repair the scratched area. 4. Visit a professional paint shop for repair. If a small piece of paint is scratched off, first determine whether it is the original paint or just the surface layer. If only the surface paint is scratched, you can use a "nano scratch repair cloth"—minor scratches can be restored with a simple wipe. Whether the scratches are minor or deep, a touch-up pen can be used for repair.
17
4
Share

What is the actual fuel consumption of the Geely Jiaji 1.8T?

For the actual fuel consumption of the Geely Jiaji 1.8T, statistics show that the fuel consumption range is 8.98-11.82L/100km, with a measured combined fuel consumption of around 10.4L. It is not a fuel-efficient car, mainly due to its large displacement and the size of the MPV body, and the lack of automatic start-stop and 48V mild hybrid support. Such fuel consumption is reasonable. Below is an introduction to the Geely Jiaji: 1. The Geely Jiaji is equipped with two engines: a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. The 1.5-liter turbocharged engine is a three-cylinder engine with a maximum power of 130kW and a maximum torque of 255Nm, which can deliver maximum torque from 1500rpm up to 4000rpm and maximum power at 5500rpm. It is paired with a 6-speed manual transmission or a 7-speed dual-clutch transmission. 2. The 1.8-liter turbocharged engine has a maximum power of 135kW and a maximum torque of 300Nm. This engine can deliver maximum torque from 1750rpm up to 4000rpm and maximum power at 5500rpm. It is paired with a 6-speed automatic transmission.
15
5
Share

What is the best engine oil for Honda Fit?

Honda Fit is recommended to use the original Guangzhou Honda engine oil. The original engine oil is formulated according to the vehicle's performance requirements, and it is sufficient to replace it regularly as required by the manufacturer's maintenance manual. The following is an introduction about engine oil: 1. Engine oil can lubricate and reduce wear, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is known as the 'blood' of the car. 2. Engine oil consists of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil, giving it new properties. Additives are an important part of the lubricant. 3. High-quality engine oil, especially fully synthetic oil, not only protects the engine and reduces the frequency of oil changes but also saves on gasoline expenses.
18
0
Share

What is the difference between Audi RS5 and S5?

Audi RS5 and S5 are completely in different classes. One can be considered a sports car in terms of performance, while the other is just a family coupe. The following are the introductions of RS5 and S5: 1. The Audi S5 is equipped with a 3.0T V6 engine, producing 333 horsepower, which is the high-power version used in the Q7, accelerating from 0 to 100 km/h in 5.1 seconds. However, the Audi RS5, as the most powerful RS model from Audi, uses a 4.2 V8 engine, naturally aspirated to squeeze out 450 horsepower. 2. As the first shot to dominate the Chinese high-performance car market, it not only excels in performance but also inherits the nearly extinct naturally aspirated technology, accelerating from 0 to 100 km/h in 4.5 seconds, rivaling the BMW M3. 3. In terms of configuration, the Audi RS5 is significantly more cost-effective than the S5, featuring a super high-power engine, a set of variable suspension, and crazy brakes with ceramic brake discs.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.