What is the fuel tank capacity of the old Cruze in liters?

2 Answers
LeAustin
07/24/25 3:58am
The 2016 old Cruze has a total of 7 models, with fuel tank capacities of 47 liters and 52 liters. The vehicles are equipped with a 1.4T turbocharged engine and a 1.5L naturally aspirated engine. All models come with a 5-speed manual transmission (MT), 6-speed automatic transmission (AT), and 7-speed dry dual-clutch transmission (DCT). In the same class, the 2022 Civic has a fuel tank capacity of 47 liters, the 2021 Xingrui has a 50-liter fuel tank, and the 2021 Corolla also has a 50-liter fuel tank. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates that the fuel is running low, and when it is near F, it means the fuel level is sufficient.
Was this review help?
10
3
Share
Presley
08/10/25 11:31pm
I remember the fuel tank capacity of the older Chevrolet Cruze was about 60 liters, roughly the same for models from around 2009 to 2015. I used to drive a 2010 Cruze, and a full tank would get me over 450 kilometers for daily commutes. On highways, it was even more fuel-efficient, easily surpassing 600 kilometers. When refueling, I made it a habit not to wait until the fuel light came on—that’s too hard on the fuel pump. It’s better to fill up when the level drops below a quarter to prevent overheating the pump due to low fuel. In city driving, fuel consumption required a bit more attention, especially with the AC on in summer, but overall, the design was quite reliable. For maintenance, I regularly checked the fuel cap seal to keep out contaminants or air. With an older car, I also cleaned out fuel tank sediment every two years to avoid clogs—small steps that helped keep the car running longer and safer. Before long trips, I always filled up the tank to avoid searching for gas stations mid-journey and to explore more places worry-free.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

How to Repair Scratched BMW Wheel Hubs?

Repair process for scratched BMW wheel hubs: 1. First, inspect the damage. If the inner part of the hub is not affected, use paint thinner to clean the area around the scratch and remove dirt. 2. For deep scratches where dirt is hard to remove, use a toothpick to clean it thoroughly. 3. Apply masking tape around the scratched area to prevent accidentally painting unaffected parts. 4. Prepare the brush tip and apply touch-up paint. Since the paint will shrink slightly as it dries, it's best to apply it slightly raised. 5. Wait for about a week until it's completely dry, then use waterproof paper dipped in soapy water to smooth the surface.
17
1
Share

What does 20550r17 mean on a tire?

20550r17 indicates the size of the tire. Here is what the numbers and letters represent: 1. The first number, 205: Refers to the tire width of 205mm. 2. The second number, 50: Represents the aspect ratio (the ratio of the tire's section height to its section width), where 50 means the section height is 50% of the width. 3. The middle letter, r: Stands for Radial-tire, indicating it is a radial tire. Most family cars on the market currently use this type of tire. Some luxury cars or sports cars might have ZR marked, indicating it is a high-speed tire with better performance. 4. The last number, 17: The number following the letter denotes the rim diameter, where 17 means the rim is 17 inches.
19
1
Share

What is the difference between manual transmission and automatic transmission?

The differences between automatic transmission and manual transmission in cars are as follows: 1. Different in nature: Automatic transmission does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Manual transmission is a gear-shifting device used to alter the engine's speed and torque transmitted to the drive wheels. 2. Different characteristics: Manual transmission allows the car to obtain varying traction and speed under different conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also enabling the engine to operate within a more favorable range. The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. 3. Different components: Manual transmission consists of gear transmission mechanisms, gearbox housing, and control mechanisms. Automatic transmission uses planetary gear mechanisms for shifting and can automatically change gears based on the degree of throttle pedal pressure and changes in vehicle speed.
11
4
Share

Why do the turn signals stay on when the headlights are turned on?

When the turn signals remain illuminated while the headlights are on, it is due to a fault in the car's lighting switch circuit or poor contact in the switch. It is necessary to promptly inspect the car's lighting circuit issues, and normal functionality can be restored after repairs. Here is an introduction to car headlights and turn signals: 1. Car headlights: Also known as car front lights or car LED daytime running lights, they serve as the "eyes" of the car and are closely related to safe driving at night or under poor weather conditions. 2. Turn signals: Turn signals can alert pedestrians and other road users that the car needs to change lanes or make a turn. Therefore, turn signals serve to inform surrounding road participants of the vehicle's intention to turn, and they are divided into left and right turn signals.
2
1
Share

How to Install the Beidou Printer Paper for Trucks?

The installation method for the Beidou printer paper in trucks is as follows: 1. First, use professional tools to remove the original steering wheel. 2. After removing the steering wheel, use a screwdriver to loosen the screws and take off the upper and lower plastic covers. Replace them with the new multifunctional steering wheel. 3. After installing the steering wheel, reconnect the electronic wiring to the corresponding positions. Once in place, tighten the fixing screws on both sides. 4. Pair the new components to ensure the newly installed parts function properly. 5. Use the 'Vehicle Diagnosis and Maintenance Information System' to clear any fault codes in the vehicle, ensuring successful pairing and performing a self-check on the vehicle's computer.
7
0
Share

How often should the oil filter be replaced?

Oil filters should be replaced every 5,000 kilometers. Detailed instructions for oil filter replacement are as follows: 1. Drive the car into the maintenance bay and use a lift to raise the vehicle to a height of 160-170 cm. 2. Use a dedicated oil filter wrench to remove the oil filter by turning it counterclockwise. 3. Take out the new oil filter from the packaging and inspect the threads and rubber seals on the new filter. 4. Install the oil filter, secure it, and then tighten the oil filter clockwise using a dedicated tool. 5. After installation, add engine oil to the specified level, run the engine for at least 3 minutes, and check for any oil leaks.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.