What is the fuel tank capacity of the Nissan Qashqai in liters?

1 Answers
Mabel
07/30/25 2:28am
The fuel tank capacity of the Nissan Qashqai is 57 liters, as officially announced. Owners who have purchased the Qashqai can also check this information on the vehicle's configuration sheet. The Qashqai requires 92-octane fuel, with a fuel consumption of 6.2 to 6.4L per 100 kilometers. A full tank can provide a driving range of approximately 891 to 919 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, leaving some space between the safe limit and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
15
2
Share
More Forum Discussions

How to Inspect a New Vehicle with Six-Year Exemption from Inspection?

For new vehicles exempt from inspection for six years, the inspection process is as follows: After handling any traffic violations, bring your ID card, vehicle license, and valid compulsory traffic insurance policy to the local vehicle management office. Fill out the Application Form for Motor Vehicle Inspection Mark, submit the documents to the annual inspection issuance window for verification, and upon approval, collect the annual inspection compliance mark. The six-year exemption means that eligible vehicles can directly apply for the inspection mark from the traffic police department without undergoing on-site inspection at an inspection agency. Vehicle annual inspection refers to a mandatory test for all vehicles with official license plates and vehicle licenses, equivalent to an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation.
14
1
Share

What kind of oil should be added to a hydraulic coupling?

Hydraulic couplings require different types of oil depending on their design. Generally, non-flammable hydraulic oils such as No. 8 hydraulic oil, No. 32 hydraulic oil, No. 20 turbine oil, or No. 6 hydraulic transmission oil can be used. The optimal oil fill level for a hydraulic coupling is between 70% to 80% of its capacity. It is important to note that gear oil must not be used, and overfilling the hydraulic coupling is strictly prohibited. Also known as a fluid coupling, a hydraulic coupling is a mechanical device that connects a power source to a working machine to transmit rotational power. Key considerations when using a hydraulic coupling include: 1. Avoid rapid and frequent forward/reverse switching; 2. Regularly inspect the alignment and precision of the motor shaft and the working machine shaft.
9
0
Share

Where is the sunroof switch located in the Tiguan?

The sunroof switch in the Tiguan is located on the overhead reading light panel in the front row of the vehicle. The functions of the car sunroof are: 1. Changing traditional ventilation methods; 2. Preventing exhaust fumes from entering the cabin; 3. Reducing wind noise; 4. Quickly lowering the interior temperature; 5. Rapidly removing interior fogging; 6. Expanding the field of vision. The Tiguan is a compact 5-door, 5-seat SUV with dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. It is equipped with a 1.8T turbocharged engine delivering a maximum power of 118 kW and a maximum torque of 250 Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
18
5
Share

Can You Still Drive with a Tire Pressure of 1.32?

It is not recommended to drive with a tire pressure of 1.32 bar. Vehicles are equipped with a tire pressure monitoring system, which typically alerts when the tire pressure falls below 1.5 bar. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and increases the risk of veering off course, compromising driving safety; Increases the movement of various parts of the tire, causing excessive rolling and abnormal heat generation; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire sidewalls prone to cracking, while generating flexing movements that lead to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. Solutions for Insufficient Tire Pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire; If the tire pressure warning reappears after inflation despite no puncture, it may be due to air leakage caused by a deformed wheel rim. It is advisable to inspect and replace the wheel rim.
11
0
Share

How to reset the tire pressure warning on the Outlander?

The method to reset the tire pressure warning on the Outlander: Simply press and hold the tire pressure reset button. The Outlander comes equipped with two naturally aspirated engines, one is a 2.0-liter and the other is a 2.4-liter, both paired with a 6-speed CVT transmission. The Outlander is a compact SUV with body dimensions of 4705mm in length, 1810mm in width, and 1710mm in height, with a wheelbase of 2670mm. The Outlander features front-wheel drive, MacPherson strut front suspension, multi-link rear suspension, and a unibody structure.
9
2
Share

What does the bright red exclamation mark in a car mean?

The bright red exclamation mark in a car indicates a malfunction in the vehicle's braking system. The reasons for the bright red exclamation mark are: 1. Severe wear of the car's brake pads: The thickness of car brake pads is generally 10mm, and when worn down to 6mm, it affects their normal use; 2. Insufficient brake fluid: The car's brake fluid should be replenished every 40,000 kilometers, otherwise, it may lead to weakened braking or even brake failure; 3. Overheated brake pads: Prolonged continuous braking can cause abnormal temperature rise in the brake pads, triggering the brake warning light; 4. Driving without releasing the handbrake: If the handbrake is not released while driving, it can increase wear on both the brake pads and the engine.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.