What is the fuel tank capacity of the Mercedes-Benz GLS450 in liters?

1 Answers
DelCaroline
07/30/25 12:00am
The 2022 Mercedes-Benz GLS450 offers four models, all equipped with an 85-liter fuel tank. The GLS450 is powered by a 3.0-liter turbocharged + electric supercharged engine, paired with an automatic transmission (AT). The vehicle features a front-engine, four-wheel-drive layout, with a double-wishbone independent front suspension. In the same vehicle class, the 2022 Land Rover Defender 90 V8 007 Collector's Edition has a fuel tank capacity of 90 liters, while the 2020 Lincoln Navigator 3.5T Reserve has an 89.3-liter fuel tank. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, with additional space left between the safe fill level and the tank opening. This space allows for fuel expansion due to temperature increases without risking overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the nominal tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with 'E' (Empty) and 'F' (Full). When the needle approaches 'E,' it indicates low fuel, while nearing 'F' signifies sufficient fuel.
Was this review help?
2
0
Share
More Forum Discussions

What Causes the Rattling Noise When the Car Window is Fully Closed on Bumpy Roads?

Window rattling noise may be caused by abnormal width of the window glass guide channel. This leads to friction between the glass and other parts when driving on bumpy roads, resulting in the noise. Below is an introduction about car windows: 1. Introduction: Car windows are openings in the four walls of the vehicle compartment, designed to block wind and rain without obstructing vision. They are generally made of glass materials, which have evolved significantly over time. 2. Classification: Safety glass - including laminated glass, tempered glass, and zone-tempered glass, among others, has greatly improved the performance of automotive glass. 3. Composition: Ordinary automotive glass is made of silica glass, with silicon dioxide content exceeding 70%, and the rest composed of sodium oxide, calcium oxide, magnesium, etc.
11
1
Share

Should You Downshift to First Gear When Pulling Over?

During the Road Test (Subject Three), it is necessary to downshift to first gear when pulling over. The deceleration process must involve sequential downshifting until reaching first gear before coming to a complete stop. Below are relevant details: 1. Subject Three: Subject Three, which includes the road driving skills test and the safety-conscious driving knowledge test, constitutes a part of the motor vehicle driver's license examination. It is the abbreviated term for the road driving skills and safety-conscious driving knowledge test in motor vehicle driver examinations. The content of the road driving skills test varies depending on the type of vehicle license being pursued. 2. Pulling Over: Pulling over is a clearly defined assessment item in the road test, requiring the examinee to maneuver the vehicle to a stop by the roadside.
4
5
Share

How often should a vehicle be inspected?

Here are the specific regulations for vehicle annual inspection intervals: 1. Passenger transport vehicles: Inspect once per year within the first 5 years; inspect every 6 months after exceeding 5 years. 2. Trucks and large/medium non-passenger transport vehicles: Inspect once per year within the first 10 years; inspect every 6 months after exceeding 10 years. 3. Small and mini non-passenger transport vehicles: Inspect once every 2 years within the first 6 years; inspect once per year after exceeding 6 years; inspect every 6 months after exceeding 15 years. 4. Inspection exemption policy: Family vehicles with 6 seats or fewer enjoy a 6-year inspection exemption. The prerequisite for this 6-year exemption is that no major traffic accidents occur during this period. If an accident occurs, an on-site inspection is mandatory. Vehicles with 7 seats or more do not qualify for the 6-year exemption policy and still require inspection every 2 years during the first 6 years.
3
5
Share

Where to Apply for a Motorcycle License?

Motorcycle licenses are processed at the local vehicle management office. Below is an introduction to the knowledge about motorcycle licenses: 1. Application Scope: Applicants can apply for a motorcycle license with their resident ID card at any location nationwide, without the need to submit a residence permit or residence registration certificate, further facilitating the public to take exams and obtain licenses conveniently and independently. Applicants can directly apply at the vehicle management office where the vehicle is to be transferred, eliminating the need to return to the original location for vehicle inspection and file retrieval. Vehicle information is transferred online, adapting to the needs of regular epidemic prevention and control, reducing face-to-face processing, minimizing travel between two locations for the public, and alleviating their burden. 2. Required Materials: Applicant's ID card, a copy of both sides, one-inch photo without a hat, application form, medical examination report, and other materials. For non-local residents, a temporary residence permit is required.
9
0
Share

The Reason Why Light Braking Causes Shaking While Hard Braking Doesn't?

Light braking causes shaking while hard braking doesn't, primarily due to significant deviations in wheel alignment data; excessively high or low tire pressure; or uneven brake disc surfaces with excessive radial runout. Below is relevant information about automotive tires: 1. Introduction: Tires are circular elastic rubber products mounted on metal rims, designed for rolling contact with the ground on various vehicles or machinery. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain driving performance. Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during use. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties. 2. Basic Functions: Tires are one of the most critical components of a vehicle. Their main functions include supporting the vehicle's entire weight and bearing its load; transmitting traction and braking torque to ensure wheel-road adhesion; absorbing and mitigating vibrations and impacts during driving to prevent excessive vibration and premature damage to vehicle components; adapting to high-speed performance while reducing driving noise; and ensuring safety, handling stability, comfort, and fuel efficiency.
1
4
Share

What is the reason for the discontinuation of MG GS?

The discontinuation of MG GS is due to unsatisfactory sales. Here are the specific details about MG GS: 1. Vehicle Positioning: MG GS is a high-performance SUV. 2. Powertrain: It is equipped with SAIC MGE 2.0TGI turbocharged engine with direct injection. This engine delivers a maximum power of 220 horsepower and a maximum torque of 350 N·m, with a fuel consumption of only 7.9 liters per 100 kilometers, paired with a TST 6-speed dual-clutch transmission. 3. Technological Features: The GS comes with smart keyless entry, one-button start, EPB electronic parking brake, Autohold automatic parking, and other technological features.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.