What is the fuel tank capacity of the Mercedes-Benz GLE?

Were 2014 Trucks Compliant with China IV Emission Standards?

2014-produced trucks all comply with China IV emission standards. The China IV emission standard was implemented starting from 2010 until the introduction of the China V standard in 2018. Therefore, vehicles manufactured between 2010 and 2017 all adhere to the China IV standard. Below are methods to check a vehicle's emission standard level: 1. Check the environmental compliance label: The emission standard can be found on the back of the vehicle's environmental compliance label. 2. Check the vehicle conformity certificate number: The first page of the vehicle conformity certificate contains emission standard information, though it's not directly stated as 'China X' but rather as a string of characters. 3. Estimate based on manufacturing year: The vehicle's emission standard can be roughly estimated based on its manufacturing year. 4. Inquiry at the vehicle management office: Bring the vehicle registration certificate to the local vehicle management office for inquiry.

3

2

Share

What does a range of 120 kilometers mean?

Driving range refers to the total distance that vehicles such as cars or ships can travel continuously under maximum fuel reserve. For electric vehicles, the driving range is the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions. A range of 120 kilometers means that, under ideal road conditions, wind speed, temperature, and other factors, the vehicle can travel 120 kilometers at a constant speed on a full charge or tank of fuel. Additional information: Below is an introduction to the relationship between driving range and vehicle speed: 1. Air resistance: When a car operates at high speeds, most of the power is used to overcome air resistance. The magnitude of air resistance is determined by factors such as frontal area and speed. Frontal air resistance = (drag coefficient x air density x frontal projected area x square of speed) ÷ 2. It is evident that higher speeds result in greater air resistance, which increases power consumption and directly reduces the driving range. 2. Structural reasons: Pure electric vehicles are significantly different from traditional fuel-powered vehicles because their power source is the battery, and most are equipped with a single-speed transmission, meaning a fixed gear ratio. The disadvantage of a single-speed transmission is that it cannot cover a wider range of speeds like multi-speed transmissions. During high-speed driving, the fixed gear ratio is relatively large, which also increases energy consumption and thus reduces the driving range.

19

0

Share

What should the driver do when the vehicle is about to exit the tunnel?

When exiting the tunnel, the driver should pay attention to height and speed limit signs; choose the lane indicated by the green arrow signal light; and turn on the headlights in advance. The following are precautions for driving through tunnels: 1. Slow down and turn on lights before entering the tunnel: Reduce speed about 100 meters before entering the tunnel, increase the following distance, and turn on the vehicle lights while driving slowly into the tunnel. Generally, the speed should not exceed 60 km/h, depending on the speed limit signs before the tunnel. 2. Do not use high beams: While driving in the tunnel, turn on the vehicle lights but avoid using high beams. The significant difference in light intensity inside and outside the tunnel already affects the driver's vision, and high beams can further increase the risk. 3. Maintain a safe following distance: Generally, the following distance in the tunnel should be kept at least 100 meters. If the tunnel is relatively long, maintain a safe distance as indicated. 4. Do not change lanes: Due to poor lighting and typically only two or three lanes, lane changes are strictly prohibited in tunnels. Always drive in your designated lane and avoid overtaking. 5. No speeding in the tunnel: Tunnels have strict speed limits, which are clearly marked before entering. Some tunnels also have speed limit reminders inside. Strictly adhere to the speed limits to ensure driving safety. 6. Avoid honking in the tunnel: The tunnel's acoustics amplify noise, making honking much louder and more irritating than outside. Drive patiently in the tunnel and avoid unnecessary honking unless in an emergency, to avoid disturbing yourself and others.

16

4

Share

What is the age limit for obtaining a driver's license?

Driver's license training age limits vary depending on the type of license. Below are the specific details: 1. Small vehicles: For small automatic transmission vehicles, small automatic transmission passenger vehicles for disabled individuals, and light motorcycles, the age requirement is between 18 and 70 years old. 2. Low-speed cargo vehicles: For three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the age requirement is between 18 and 60 years old. 3. City buses: For large trucks, trolleybuses, or tram vehicles, the age requirement is between 20 and 50 years old.

6

5

Share

What is the difference between dual throttle cables and single throttle cables?

Here are the differences between dual throttle cables and single throttle cables: 1. The number of throttle cables differs: If it is a single cable, there is only one throttle cable under the right-hand throttle grip. In contrast, if it is a dual cable setup, there are two throttle cables under the right-hand throttle grip. 2. The precision of throttle control varies: Dual throttle cables offer more precise control compared to single cables. 3. The throttle return effect differs: Dual throttle cables provide better throttle return than single cables. 4. Their applications vary: Constant vacuum carburetors often use dual throttle cables, while slide carburetors typically use single throttle cables.

11

5

Share

What is the Difference Between Guide Lanes and Variable Guide Lanes?

Here are the differences between guide lanes and variable guide lanes: 1. Different in nature: (1) Guide lanes: These are lane markings that guide direction. They are used to indicate the direction vehicles should follow when entering an intersection. (2) Variable guide lanes: The direction after entering this lane must be determined according to the corresponding lane traffic light. 2. Different in use: (1) Guide lanes: Used to indicate the direction vehicles should follow at an intersection. (2) Variable guide lanes: Adjust traffic flow in different directions to reduce congestion. 3. Different route requirements: (1) Guide lanes: The driving direction is fixed, and vehicles must follow the lane markings. Special attention should be paid to left-turn lanes, where overtaking is not allowed. (2) Variable lanes: Multiple diagonal lines are drawn inside the lane.

9

1

Share

What is the fuel tank capacity of the Mercedes-Benz GLE?

Were 2014 Trucks Compliant with China IV Emission Standards?

What does a range of 120 kilometers mean?

What should the driver do when the vehicle is about to exit the tunnel?

What is the age limit for obtaining a driver's license?

What is the difference between dual throttle cables and single throttle cables?

What is the Difference Between Guide Lanes and Variable Guide Lanes?

What does the one-certificate-for-all motorcycle test mean?

What does MOT mean in the automotive industry?

What is the standard voltage of LIN bus?

How to Apply for ETC for an 8-Seater Vehicle?