What is the fuel tank capacity of the Mercedes-Benz CLA220?

1 Answers
OJace
07/29/25 11:26am
The fuel tank capacity of the Mercedes-Benz CLA220 is 56L. Model Name: CLA220 4MATIC Year: 2019 Length: 4673mm Width: 1777mm Height: 1417mm Wheelbase: 2699mm Fuel Tank Capacity: 56L Seating Capacity: 5. Maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check if the vent holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket of the fuel filler cap should also be intact to prevent fuel from spilling out while driving. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient. Methods to open the fuel tank: Mechanical key opening: This method is usually seen in some rugged off-road vehicles and is generally not used in modern family cars. In-car switch method: The in-car fuel tank switch is located in different positions depending on the car model. Always remember to turn off the engine before refueling. Press-type opening method: The press-type fuel tank door opening is currently the most convenient method.
Was this review help?
15
2
Share
More Forum Discussions

What are the three legendary supercars?

The Porsche 918, McLaren P1, and Ferrari LaFerrari, along with the Koenigsegg Agera, stand above the rest in terms of price, aesthetics, and performance in the automotive world. If these three hypercars were likened to Qiao Feng, Xuzhu, and Duan Yu (renowned characters from Chinese martial arts novels), then Koenigsegg and Pagani would perhaps be the 'hidden masters' (a reference to an exceptionally skilled but unassuming martial artist). However, as they are traditional gasoline-powered vehicles, they did not make the cut for the so-called 'three legendary supercars.' The performance of these three cars is widely recognized, and parallel comparisons between them are abundant, even featuring in TopGear Season 22, Episode 5.
12
5
Share

What is the correct hand position for holding the steering wheel?

The proper hand position for holding the steering wheel should be left hand between 9 and 10 o'clock positions, and right hand between 3 and 4 o'clock positions. Below are detailed introductions about the steering wheel: Adjustment method: For adjusting the steering wheel's forward/backward and height distance, it should be done in a natural sitting posture with one arm extended to rest on the top of the steering wheel, maintaining a generally straight but slightly bent arm position. Functional role: The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver on the steering wheel rim into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and installation clips or screw holes corresponding to the driver airbag (DAB).
12
3
Share

How to Check Tire Pressure in the 2019 Magotan?

The method to check tire pressure in the 2019 Magotan is: view it through the display on the instrument panel. Tire pressure refers to the air pressure inside the tires. The 2019 Magotan is a mid-size sedan under FAW-Volkswagen. Taking the 2019 Magotan Comfort National V as an example, its body dimensions are: length 4866 mm, width 1832 mm, height 1464 mm, with a wheelbase of 2871 mm, and a fuel tank capacity of 66 liters. The 2019 Magotan Comfort National V is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
2
0
Share

What city does license plate Lu A belong to?

Lu A is the license plate for Jinan City, Shandong Province. Lu is the abbreviation for Shandong Province. The license plate codes for Shandong Province are as follows: Lu B is Qingdao, Lu C is Zibo, Lu D is Zaozhuang, Lu E is Dongying, Lu F is Yantai, Lu G is Weifang, Lu H is Jining, Lu J is Tai'an, Lu K is Weihai, Lu L is Rizhao, Lu M is Binzhou, Lu N is Dezhou, Lu P is Liaocheng, Lu Q is Linyi, Lu R is Heze, Lu S is Laiwu. The function of a license plate is: through the license plate, you can know the region to which the vehicle belongs, and you can also find the owner of the vehicle and the registration information of the vehicle based on the license plate.
15
1
Share

Is the Vehicle and Vessel Tax Mandatory?

When purchasing compulsory traffic insurance, if the vehicle and vessel tax for the current year has already been paid, it does not need to be paid again. However, if the tax for the current year has not been paid, it must be settled. Insurance companies, acting as withholding agents, are required to collect the tax, and taxpayers cannot refuse. Below is relevant information about the vehicle and vessel tax: 1. According to Article 6 of the "Vehicle and Vessel Tax Law of the People's Republic of China": Insurance institutions engaged in compulsory third-party liability insurance for motor vehicles are the withholding agents for the vehicle and vessel tax. They must collect the tax in accordance with the law when collecting insurance premiums and issue tax collection certificates. 2. Vehicle and Vessel Tax Law: The "Vehicle and Vessel Tax Law of the People's Republic of China" is the legal basis for taxpayers to pay the vehicle and vessel tax. It was passed at the 19th Meeting of the Standing Committee of the 11th National People's Congress on February 25, 2011, and came into effect on January 1, 2012.
12
3
Share

What is the tire model of the Dongfeng Peugeot 301?

Peugeot 301 tire model specifications: 195/55R16, 195mm. The following is an introduction about tires: 1. The international standard tire code represents the section height and aspect ratio in millimeters as a percentage. It is followed by: tire type code, rim diameter (inches), load index (allowable load mass code), and allowable speed code. 2. Tire size is printed on the sidewall, and there are two representation methods, such as 34*7 or 7.50-20. The former is for high-pressure tires, and the latter is for low-pressure tires. There are also many other markings, for example, D is used for light vehicles, F for medium vehicles, G for standard vehicles, and H, L, J for large luxury and high-performance vehicles. 3. If an R is printed on the sidewall, such as 175R13, it indicates that the tire is a radial tire, with a width of 175mm (6.9 inches), mounted on a wheel with a rim diameter of 13 inches (330mm), and the word RADIAL is usually also engraved.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.