What is the fuel tank capacity of the Mercedes-Benz C-Class?

1 Answers
DelAmy
07/29/25 3:43pm
The 2022 Mercedes-Benz C-Class has a total of 10 models, all with a fuel tank capacity of 66 liters. The 2022 Mercedes-Benz C-Class is equipped with a 1.5-liter turbocharged engine, and the transmission type is an automatic transmission (AT), with a front suspension of multi-link independent suspension. Among vehicles in the same class, the 2022 BMW 3 Series 320i Sport Package has a fuel tank capacity of 59 liters, and the 2022 Audi A4L 35TFSI Fashion Dynamic model has a capacity of 56 liters. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel in the tank can expand when the temperature rises without overflowing the tank's safe space. If fuel is added up to the tank opening during refueling, the actual refueling amount may be larger than the marked fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.
Was this review help?
17
1
Share
More Forum Discussions

Can the Vehicle Inspection Sticker Be Reissued?

Vehicle inspection stickers can be reissued. Reissuance of Vehicle Inspection Stickers: If the vehicle inspection sticker is lost, you can apply for a reissue at the local vehicle management office or traffic police department where the vehicle was inspected. You need to bring the vehicle registration certificate, the owner's ID card, and other required documents. Then, follow the relevant procedures to fill out an application form for reissuance. There is usually a fee for reissuance, and it can generally be completed within one business day. Vehicle Inspection Sticker: Remove the expired vehicle inspection sticker from the windshield. If dust or residue from the old sticker is found after removal, clean that area thoroughly. If it is the first time applying the inspection sticker for a new car, wipe the upper right corner of the windshield clean, ensuring there is no dust.
17
0
Share

Can car floor mats dry by themselves if they get wet?

Car floor mats can dry by themselves if they get wet. Here is some information about car floor mats: 1. Introduction: Car floor mats are an eco-friendly automotive interior component that integrates five main functions: water absorption, dust absorption, stain removal, sound insulation, and protection of the main carpet. 2. Definition: Car floor mats are interior decorations that help maintain cleanliness inside and outside the vehicle, adding aesthetic and comfortable touches. 3. Function: Car floor mats absorb water, dust, and stains, effectively preventing residual moisture and dirt from shoes from causing slippage between the clutch, brake, and accelerator, thereby avoiding potential safety hazards. They also reduce the likelihood of interior contamination and damage, as cleaning floor mats is more convenient and economical than cleaning the entire interior.
3
1
Share

What does ACC car mean?

ACC car refers to a car equipped with an Adaptive Cruise Control system. More information about ACC cars is as follows: 1. The Adaptive Cruise Control system can also be called Active Cruise Control, similar to traditional cruise control. This system includes a radar sensor, digital signal processor, and control module. 2. During active cruise control, if the system detects that the vehicle ahead is slowing down or a new target is detected, it will send an execution signal to the engine or control system to reduce the vehicle speed. 3. During active cruise control, if the road obstacle ahead is cleared, the system will accelerate back to the set speed, and the radar system will automatically monitor the next target. 4. ACC replaces the driver in controlling the vehicle speed, avoiding frequent cancellation and setting of cruise control. The Adaptive Cruise Control system is suitable for various road conditions, providing drivers with a more relaxed driving experience.
17
5
Share

What Causes Slow Rotation Speed of Car Cooling Fan?

Car cooling fan rotation speed slows down due to the following reasons: 1. Circuit failure: The most common cause is circuit failure in the fan motor leading to reduced speed. 2. Fan clutch malfunction: If the circuit is functioning properly, inspect the fan clutch to check if it remains engaged causing failure to disengage. 3. Switch failure: Faulty temperature control switch of the fan results in decreased rotation speed. Additional information: The primary function of the cooling system is to dissipate heat into the air to prevent engine overheating, but the cooling system also serves other important purposes. A car's engine operates most efficiently at appropriately high temperatures. If the engine cools down excessively, it accelerates component wear, thereby reducing engine efficiency and increasing pollutant emissions.
15
1
Share

What are the reasons for frequent failure of the crankshaft position sensor?

Crankshaft position sensors mainly come in three types: magnetoelectric induction type, Hall effect type, and photoelectric type. The causes of crankshaft position sensor failure can be divided into three situations: 1. For the magnetoelectric induction type: The fault of the magnetoelectric induction crankshaft position sensor is that the engine cannot start. When checking the engine condition, late ignition is the real reason why the engine cannot start. 2. Hall effect type: The Hall effect crankshaft position sensor is used for sequential fuel injection, ignition timing, and knock control of the engine. When it fails, the transmitted signal is not within the normal range. 3. Photoelectric type: The fault of the photoelectric crankshaft sensor is poor engine acceleration. The engine may automatically stall during startup, and sometimes high-voltage sparks may occur. The reason is poor performance of the ignition system, resulting in weak high-voltage sparks.
11
1
Share

Does replacing the clutch affect a motorcycle?

Replacing the clutch has basically no impact on a motorcycle. Precautions for clutch replacement: Using original clutch plates for replacement won't cause issues, but poor-quality parts may lead to shaky starts and incomplete clutch disengagement failures, so careful selection is essential. Function of a motorcycle clutch: It primarily serves to disconnect and transmit engine power to the transmission. Based on this characteristic, regardless of the riding condition, pulling the clutch lever separates the transmission from the engine – meaning the vehicle loses power. Additionally, during motion, the rear wheel's reverse driving force generated by the motorcycle's inertia won't transfer to the engine, leaving the transmission and engine rotating independently in this state.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.