What is the fuel tank capacity of the Mazda Ruiyi?

2 Answers
OAlyssa
09/07/25 5:05am
The 2015 Mazda Ruiyi 2.0L Automatic Elite Edition has a fuel tank capacity of 64L. It is equipped with a 2.0L naturally aspirated engine and a 5-speed automatic transmission (AT). The drivetrain is front-engine, front-wheel drive. The front suspension features a double-wishbone independent suspension with a stabilizer bar, while the rear suspension is a multi-link independent suspension with a stabilizer bar. In the same vehicle class, the 2021 Skoda Superb TSI280 DSG Standard Edition has a fuel tank capacity of 68.5L, and the 2021 Mazda Atenza 2.0L Sky Fashion Edition has a fuel tank capacity of 56.2L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel amount may exceed the calibrated capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle is close to E, it indicates low fuel, and when it is near F, it means the tank is full.
Was this review help?
15
1
Share
RichardAnn
09/19/25 4:24am
As a long-time Mazda owner, I've been driving the Atenza for several years. The standard fuel tank capacity is 65 liters, which is quite practical. A full tank gives me peace of mind on long trips, and in city driving, the range can easily exceed 500 kilometers thanks to its decent fuel consumption control, averaging around 8 to 9 liters per 100 km. I often discuss fuel tank size with fellow car enthusiasts and find 65 liters to be just right—it doesn't take up too much space while minimizing refueling frequency. When the car was new, the fuel tank had excellent sealing, but over time, it's important to regularly check the fuel cap and pipes to prevent leaks. I recommend having the mechanic inspect the fuel tank during routine maintenance—safety first. Honestly, fuel tank capacity doesn't matter much; what really counts is driving habits—ease off the accelerator to save fuel.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What is the curb weight of the Maxus G20?

The Maxus G20 has been extended by 3 cm, and the rear wheels have been changed to independent suspension, estimated to be around 2200 kg. Maxus G20 body dimensions: The body dimensions of the Maxus G20 are 5198mm, 1980mm, and 1928mm respectively. The manufacturer of this vehicle is SAIC Maxus, classified as an MPV, with a gasoline energy type. The transmission is an 8-speed automatic manual, and the body type is a 5-door, 7-seat MPV. Maxus G20 drivetrain: The front brake type of this vehicle is ventilated disc, the rear brake type is disc, the drivetrain is front-engine rear-wheel drive, the front suspension type is MacPherson independent suspension, the rear suspension type is multi-link independent suspension, and the power steering type is electric power steering.
10
4
Share

What is the function of a knock sensor?

The functions of a knock sensor are: 1. To measure engine vibration and adjust the ignition timing when engine knocking occurs; 2. It serves as an AC signal generator to detect the speed and position of the crankshaft. The knock sensor consists of: a magnetic core, permanent magnet, and induction coil. The working principle of the knock sensor is: when vibration or knocking occurs, it generates a small voltage peak. The more severe the knocking or vibration, the higher the voltage peak produced by the knock sensor. A certain high frequency indicates knocking or vibration. Knock sensors are typically designed to measure frequencies in the range of 5 to 15 kHz. When the control unit receives these frequencies, the computer readjusts the ignition timing to prevent further knocking.
18
1
Share

How to Reset the Maintenance Light on Zotye Damai X5?

Method to reset the maintenance light on Zotye Damai X5: 1. Insert the car key into the ignition switch without turning it on; 2. Press and hold the long rod buttons on both sides of the dashboard, do not release; 3. While holding the long rod buttons, turn the key to the power-on position without starting the engine; 4. After ten seconds, release both long rod buttons, then immediately press the left long rod button; 5. Restart the engine to complete the maintenance light reset. The Zotye Damai X5 is a new SUV brand under Zotye Auto, with body dimensions of 4527mm in length, 1836mm in width, 1682mm in height, a wheelbase of 2680mm, and a top speed of 2680mm per hour.
5
2
Share

How to Remove the Main Airbag of the New Passat?

The method for removing the main airbag of the New Passat: 1. Disconnect the battery cable and turn the steering wheel; 2. Remove the side covers on both sides of the steering wheel, unscrew the four fixing bolts on both sides, and pull out the entire steering shaft; 3. Take out the generator and sensor from the steering wheel interface, remove the fixing nut of the steering wheel, take out the nut and flat washer, and then remove the steering wheel. The New Passat is a mid-size sedan designed by Volkswagen AG in Germany, with a body length, width, and height of 4933mm, 1836mm, and 1465mm respectively, a wheelbase of 2871mm, and body colors including Glazed Green, Diamond Gray, Titanium Gold, Golden Black, Platinum Silver, Azure Blue, Jade White, and Ruby Red.
18
3
Share

What are the reasons for a Passat car not starting and the gauge spinning erratically?

Passat car not starting and the gauge spinning erratically is due to a dead battery, clogged fuel lines, or poor fuel quality, and spark plug failure. Below are the relevant explanations: Dead battery: The starter motor turns weakly at first, then makes crackling noises. When the temperature is extremely low, water mixed with debris can block the fuel lines, resulting in failure to start. Fuel flow obstruction: Clean the fuel lines, do not wait until the gasoline is almost empty to refuel, and ensure there is fuel pressure in the engine's fuel supply line. This situation often occurs on extremely cold mornings. When the temperature is very low, water mixed with debris can block the fuel lines, resulting in failure to start.
13
5
Share

How to clear the 'Service Due' reminder on Changan CS75?

Methods to clear the 'Service Due' reminder on Changan CS75: 1. Turn the car key to the ON position (full vehicle power-on state); 2. Press the selection button on the steering wheel, then press and hold the reset button for about 5 seconds (keep holding the reset button without releasing); 3. Turn off the power (while still holding the reset button), then turn the vehicle power back on to clear the 'Service Due' reminder. The Changan CS75 is an SUV under Changan Passenger Vehicle, with body dimensions of 4650mm (length) × 1850mm (width) × 1705mm (height), a wheelbase of 2700mm, and a 5-door, 5-seat configuration.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.