What is the fuel tank capacity of the Mazda Atenza?

2 Answers
LaFinley
09/08/25 5:29am
Mazda Atenza has a fuel tank capacity of 58L. Fuel tank capacity range: The fuel tank capacity of a car varies depending on the model: compact cars, midsize sedans, and midsize SUVs typically have fuel tank capacities ranging from 55 to 70L; large SUVs have fuel tank capacities from 100 to 1000L. How to check fuel tank capacity: Generally, the fuel level can be observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately displayed on the gauge. The fuel gauge on the dashboard has 5-6 segments, with each segment representing the remaining fuel capacity in the tank. It is recommended to refuel when the fuel gauge shows only two segments left to avoid running out of gasoline while driving.
Was this review help?
4
5
Share
LaJuniper
09/20/25 4:08am
I've been driving the Mazda6 Atenza for a while now, and it has a fuel tank capacity of 58 liters. As a daily commuter car, this size is quite suitable - one full tank can cover over 600 kilometers in city driving, with an average fuel consumption around 8 liters per 100km. I've also found that maintaining the tank half full for extended periods helps protect the fuel pump from pressure damage. For long-distance trips, there's convenient access to refueling points along the way without frequent worries about running out of fuel. I'd recommend adjusting based on driving habits: smooth acceleration can extend the driving range, and always check the fuel gauge before refueling - don't wait until the warning light comes on to avoid engine damage. Overall, the 58-liter design strikes a good balance between space and practicality, meeting mainstream standards for modern sedans.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

Do You Need to Wait for a Red Light to Make a U-Turn?

If the U-turn signal light is red, you must wait to make a U-turn; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this offense carries a penalty of 6 demerit points and a fine of 200 yuan. If there is no U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic light and does not require crossing the pedestrian crossing. However, if the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to the left-turn signal light. Making a U-turn directly may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, you must yield to pedestrians: If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side of the road must slow down and proceed only after ensuring safety. If pedestrians are waiting outside the boundary line of the motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and proceed only after ensuring safety. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians enter the motorized lane (Lane A) along the crosswalk, vehicles in Lane B must slow down and proceed only after ensuring safety. If vehicles in Lane A do not stop and yield, it is a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians cross the centerline of the road and enter the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If the road is divided by a green belt and pedestrians are waiting in the central stopping area, vehicles must slow down and proceed only after ensuring safety. Scenarios where U-turns are allowed: If there is a U-turn sign at the intersection, you can make a U-turn. If there is a U-turn signal light, follow its instructions. If there is no signal light, make the U-turn based on the specific situation, ensuring it does not hinder other vehicles or pedestrians. If there is no explicit prohibition of U-turns or left turns at the intersection, you can make a U-turn. "No explicit prohibition" means the intersection lacks signs like "No U-Turn" or "No Left Turn," and the centerline is not solid. U-turns are also allowed on yellow grid lines. Yellow grid lines are no-stopping zones marked at intersections prone to congestion due to temporary stops, important entrances, or other designated areas. Stopping on these lines (including waiting for traffic lights) is a violation. However, while stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. If there is a U-turn signal light, you must follow it—only proceed on green. If signs prohibiting left turns and allowing U-turns appear together, U-turns are permitted, but left turns are not. Note that "No U-Turn" is not the same as "No Left Turn." Precautions when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, even if "No U-Turn" is not mentioned, U-turns are not allowed at that intersection, as U-turns inherently involve left turns. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles before making a U-turn. Failing to do so will make you fully liable for any accidents. Near the intersection stop line, lanes usually have guiding arrows. The leftmost lane may not always have a left-turn arrow—some may have straight arrows. Even without explicit "No U-Turn" signs, U-turns are not allowed in such lanes.
11
2
Share

What Causes the Abnormal Noise in Lavida?

Possible reasons include: 1. Items stored in the car's storage compartment or trunk may shake or bounce, causing abnormal noise. 2. Loose interior components with poor vibration isolation may resonate and produce noise. 3. Loose vehicle wiring harnesses are also a major cause of abnormal noise. Other potential causes include: 1. Plastic parts expanding and contracting due to temperature changes, especially in winter. Protect plastic components before driving in cold weather and avoid disassembly. 2. Metal seatbelt buckles hitting the car body. Push the buckle to the end position after use to prevent collisions. 3. Debris, such as repair service advertisement cards, falling into door gaps.
3
4
Share

What does Volkswagen Magotan B8L mean?

B8L is a model code for the Magotan, representing the long-wheelbase version. Below are detailed specifications about the Volkswagen Magotan B8L: 1. The dimensions of the Volkswagen Magotan B8L are 4866mm in length, 1832mm in width, and 1464mm in height. The wheelbase is 2871mm, which is 80mm longer than the overseas version and 59mm longer than the current model. 2. The B8L is equipped with an entertainment information system, multifunction steering wheel, head-up display, and other features. Its front design combines with the more angular headlights on both sides, and the exhaust adopts a dual-outlet flat design. 3. The B8L offers three engine options for consumers: 1.4TSI, 1.8TSI, and 2.0TSI. Among them, the 1.8TSI and 2.0TSI are the third-generation EA888 engines, with maximum power outputs of 179 horsepower and 220 horsepower, respectively.
12
3
Share

What are the causes of timing chain noise?

The causes of timing chain noise are as follows: 1. Tensioner failure causing the timing belt or timing chain to vibrate and produce impact noise; 2. Tensioner pulley bearing noise; 3. Over-tightened tensioner, resulting in timing belt or timing chain noise; 4. Timing chain wear or timing belt wear (backside) causing noise. The characteristics of timing belt noise are: 1. When the engine is running at low speed, there is a sound similar to valve tapping in the upper front part of the engine, which weakens or becomes irregular as the speed increases; 2. After adjusting the valve clearance, the noise still persists, and when touching the timing gear cover, a vibration can be felt with the fingers.
2
0
Share

What are the differences between the Mercedes-Benz E-Class and C-Class?

The differences between the Mercedes-Benz E-Class and C-Class are: 1. Different positioning: The E-Class is Mercedes-Benz's flagship mid-size luxury sedan; the C-Class is only the entry-level luxury model in the Mercedes-Benz lineup. 2. Different maximum torque: The E-Class has a maximum torque of 280 Nm; the C-Class has a maximum torque of 250 Nm. 3. Different maximum power: The E-Class has a maximum power of 135 kW; the C-Class has a maximum power of 115 kW. 4. Different maximum power rpm: The E-Class reaches its maximum power at 5800-6100 rpm; the C-Class reaches its maximum power at 5700 rpm.
5
1
Share

What is the Difference Between Automatic and Manual Transmissions?

Manual and automatic transmissions differ primarily in terms of driving comfort. The specific differences are as follows: 1. Manual Transmission: Officially known as a manual gearbox, abbreviated as MT, it primarily functions by manually shifting the gear lever to change speed and gears. 2. Automatic Transmission: With an automatic transmission, the driver does not need to manually shift the gear lever. Instead, the vehicle automatically selects the appropriate gear based on driving speed, vehicle condition, road conditions, and other factors during operation. The driver typically only needs to control the accelerator, brake, and steering wheel, with no need to operate the gearbox or use a clutch pedal.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.