What is the fuel tank capacity of the Malibu XL in liters?

1 Answers
VanBennett
07/29/25 9:12pm
Currently, there are 9 models of the Malibu XL available for sale. The 535T version has a fuel tank capacity of 55 liters, while other versions have a capacity of 60 liters. This data is provided by the automobile manufacturer, and owners who have purchased the Malibu XL can also check it on the vehicle's configuration sheet. The 535T version of the Malibu XL uses 92-octane fuel, while other series use 95-octane fuel. The fuel consumption per 100 kilometers ranges from 6.3 to 6.7 liters, and a full tank can cover a distance of 873 to 896 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the automobile manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank's safety space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
3
0
Share
More Forum Discussions

How often should the engine pulley of a car be replaced?

The engine pulley of a car should be replaced every 2 years or 60,000 kilometers. Since the pulley and the belt work together, they should be replaced simultaneously. Installing a car engine pulley is a highly complex task, so it is recommended not to attempt it yourself; instead, have it installed by professional 4S shop personnel. The belt and pulley are crucial components of the engine's valve timing system, ensuring the accuracy of intake and exhaust timing through their connection to the crankshaft with a specific transmission ratio. Pulleys fall under the category of hub-like parts, generally relatively large in size, and are typically manufactured through casting or forging processes, with cast steel rarely used. Smaller-sized pulleys can be designed as forged components, usually made of steel.
2
4
Share

How to Repair Car Wheel Hubs?

Here are the methods for repairing car wheel hubs: 1. Scratches on the wheel hub edge: In this case, professional welding technology can perfectly repair and refurbish the hub. 2. Damage to the wheel hub edge: If the car's wheel hub is accidentally hit by a hard object, it may cause the edge to break. In such a situation, the car tire must be replaced, but the wheel hub can still be perfectly repaired and refurbished through welding and reshaping. 3. Gaps on the wheel hub edge: When a hard wheel hub is violently struck by stones or other hard objects, it may cause gaps on the edge. Depending on the shape of the gap, it can be perfectly repaired through buildup welding, airtightness testing, and surface treatment. 4. Wheel hub fracture: For fractured parts of the car wheel hub, even small cracks should never be ignored as they pose serious safety hazards. The hub can be refurbished through procedures like crack welding, polishing, and painting.
4
2
Share

What is the function of the front windshield film?

The functions of front windshield film include: 1. Sun protection and UV protection: The front windshield has a large heat-receiving area and is exposed to more ultraviolet radiation. The film can effectively block UV rays, ensuring the health of the driver and passengers; 2. Heat insulation: The film can block a portion of the heat; 3. Anti-glare: During the day, the bright sunlight can cause glare, and at night, the strong lights from oncoming vehicles can also produce dazzling glare, especially when driving on rainy nights when the lights are more chaotic. The front windshield film can effectively reduce this glaring light; 4. Anti-explosion function: Since the front windshield is made of tempered safety glass, if the glass shatters, the installed front film prevents the fragments from flying, thereby protecting the safety of the driver.
13
1
Share

What is the fuel tank capacity of the Roewe RX3?

The fuel tank capacity of the Roewe RX3 is 48 liters, which is the safe capacity marked in the user manual. The safe capacity refers to the volume from the bottom of the fuel tank to the safety limit line. In fact, there is still a certain distance from the safety limit line to the fuel tank opening. The manufacturer has set a safety limit line for car owners, suggesting not to exceed the marked capacity when refueling. The Roewe RX3 is a model under SAIC Roewe, with body dimensions of 4408mm in length, 1804mm in width, and 1651mm in height, and a wheelbase of 2625mm. In terms of exterior design, the Roewe RX3 continues the family-style design elements of Roewe, with an overall style very similar to the Roewe RX5 model. It features an inverted trapezoidal chrome grille paired with eagle-eye-style front headlights, and the taillights use LED light sources.
10
0
Share

Where is the ambient light switch for the Mercedes-Benz C200L?

The ambient light switch for Mercedes-Benz vehicles is generally located on the overhead sunroof switch, or you can directly use the directional keys on the steering wheel to select the dashboard settings interface, choose the lighting settings, and then find the ambient light option to turn it on or off. Below is more information about ambient lights: 1. Concept: Ambient lights are decorative lighting fixtures, typically available in colors such as red, blue, yellow, and green. 2. Function: Ambient lights can make the interior of the car more dazzling at night, creating a lively atmosphere. 3. Adjustment: Different ambient light colors can be selected and adjusted on the central control screen, and the ambient lights will change according to the color settings on the central control screen. When using ambient lights, it is essential to adjust the brightness properly, as negligence may lead to safety hazards.
2
3
Share

What is the relationship between RPM and gear?

RPM and gear have a matching relationship. The following is an introduction to RPM: 1. Introduction: Rotational Speed (Rotational-Speed or Rev) refers to the number of revolutions a rotating object makes around a central point per unit time (different from frequency). Common RPM types include rated speed and maximum speed. 2. Structure: Hard drive speed is expressed in revolutions per minute, with the unit denoted as RPM, which stands for Revolutions Per minute. A higher RPM value indicates faster internal transfer rates, shorter access times, and better overall hard drive performance. 3. Function: The spindle motor of a hard drive spins the disk at high speed, generating buoyancy that allows the read/write head to float above the disk. The faster the rotation speed, the shorter the waiting time to bring the target data sector under the head. Therefore, RPM largely determines the speed of a hard drive.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.