What is the fuel tank capacity of the Lingpai in liters?

1 Answers
VanKaylee
07/29/25 5:50pm
The fuel tank capacity of the Lingpai is 40 liters, as officially announced. Owners who have purchased the Lingpai can also check this information on the vehicle's configuration sheet. The Lingpai requires 92-octane fuel, with a fuel consumption of 4.0-5.0L per 100 kilometers. A full tank can provide a driving range of 800 to 1000 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
2
5
Share
More Forum Discussions

How to Use Lights When Driving Over a Humped Bridge on a Slope at Night?

Alternate between high and low beams at least twice. Relevant regulations are as follows: 1. Article 58: When driving at night without street lights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, motor vehicles should turn on headlights, position lights, and rear lights. However, high beams should not be used when a following vehicle is driving close to the vehicle in front in the same direction. Motor vehicles driving in foggy conditions should turn on fog lights and hazard warning flashers. 2. Article 59: When driving at night through sharp curves, slopes, humped bridges, pedestrian crossings, or intersections without traffic signal control, motor vehicles should alternately use high and low beams to signal.
16
3
Share

How much fuel does idling with AC on consume?

When idling with the engine running and the air conditioning on for about 1 hour, the car consumes approximately 2 liters of fuel. Here are some related points: 1. Engine idling: Engine idling consumes a significant amount of fuel. If the idling is only to power the air conditioning compressor, it wastes even more energy. Long-term operation of the engine at high temperatures may lead to dangerous accumulation of carbon dioxide and carbon monoxide inside the vehicle. 2. Precautions when using car air conditioning: Many people occasionally smoke to stay alert while using the car air conditioning. However, smoking with the air conditioning on prevents the smoke from being promptly vented outside, which can harm the eyes and respiratory system.
15
5
Share

Does selling a motorcycle without inspection have any impact?

A motorcycle without inspection is equivalent to having no formalities. You can sell a motorcycle without formalities, but the price will be discounted. If possible, it is more appropriate to complete the formalities before selling. Below is relevant information about annual inspection: 1. The purpose of annual inspection: The purpose of annual inspection is to determine the technical condition and working capability of the vehicle, identify the location and cause of faults. Only after passing the annual inspection can it provide a basis for the continued operation or maintenance of the vehicle. 2. Notes for annual inspection: Do not alter the vehicle's appearance or tire size. The actual vehicle must match the photo on the driving license. If the vehicle's appearance has changed, it may also fail the annual inspection.
13
5
Share

Why is learning to drive an automatic car more expensive than a manual one?

Specific reasons are as follows: 1. Automatic transmissions have higher technical content: Compared to manual transmissions, automatics incorporate more advanced technologies and patents. To this day, China cannot be said to truly master the core technologies of automatic transmissions. Manual transmission technology is relatively simpler with no more technical confidentiality issues. 2. Higher manufacturing costs: Automatic transmissions have stricter manufacturing process requirements and higher production costs. While many foreign-brand engines have been localized or even exported, China currently doesn't have fully localized automatic transmissions, with even CKD assembly being rare.
7
1
Share

How to Conduct Vehicle Inspection Under the New 2021 Regulations

For new vehicles within 6 years, two exemptions are granted (inspection labels must be applied for every two years without requiring on-site vehicle testing); at the 6th and 8th years, vehicles must undergo on-site testing. For private vehicles over 10 years old, the original inspection cycles remain unchanged: annual inspections for vehicles aged 10 to 15 years, and semi-annual inspections for those over 15 years. Key considerations for annual vehicle inspections include: 1. Preheating the vehicle: During inspection, tailpipe emissions are tested for compliance, focusing on the oxygen sensor and catalytic converter. Their optimal operating temperature ranges from 400 to 800 degrees Celsius. Therefore, preheating the vehicle in the external inspection area before the emissions test can increase the pass rate. 2. Cleaning the vehicle in advance: Before the annual inspection, owners should clean the vehicle body, engine compartment, and chassis to facilitate the inspection process and improve the likelihood of passing.
13
5
Share

What is the fuel consumption per 100 kilometers of the Kymco CT250?

Due to the reduction in curb weight and shortened wheelbase, the Kymco CT250 has a comprehensive fuel consumption of approximately 4.3L per 100 kilometers. More detailed information is as follows: 1. Engine: The Kymco CT250 is a scooter developed with reference to the Kymco Xciting 250, but with a flatter floorboard, certain load-bearing capacity, and a slightly shorter wheelbase, which improves handling. However, it still uses the same single-cylinder, liquid-cooled, fuel-injected engine as the Xciting 250. 2. Power: This engine has an actual displacement of 249ml, with a maximum power of 16KW at 7500rpm and a maximum torque of 22N.m at 6500rpm. Its power tuning is not much different from other scooters, being more biased towards low and medium speeds.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.