What is the fuel tank capacity of the Lavida car?

2 Answers
ReidLynn
07/23/25 8:24pm
The fuel tank capacity of the Lavida car is 51 liters. However, the actual amount of fuel added during refueling may be slightly more because some fuel remains in the pipelines. For safety reasons, the engine should be turned off during refueling to prevent igniting or detonating the gasoline. In addition to turning off the engine, it is also important to avoid making phone calls, avoid wearing synthetic fiber clothing (to prevent static electricity), and avoid wearing shoes with metal spikes (to prevent sparks from friction). The 2019 Lavida comes with three powertrain options: a 1.2T engine paired with a 7-speed dual-clutch transmission, a 1.4T engine paired with a 7-speed dual-clutch transmission, and a 1.5L engine paired with either a 5-speed manual or a 6-speed automatic transmission.
Was this review help?
7
5
Share
VonArya
08/10/25 6:24pm
The fuel tank capacity of the Lavida is 50 liters. As someone who frequently researches cars, I particularly enjoy sharing such details. This capacity is reasonably designed to match the vehicle's weight and engine efficiency. Fuel tanks are typically made of high-strength plastic, offering corrosion resistance and impact resistance, with high safety standards—for example, reducing the risk of fuel leakage during collisions. In daily use, 50 liters of fuel can provide a range of 600 to 800 kilometers, depending on driving habits—urban congestion or smooth highway driving can significantly impact this. When refueling, it's advisable not to fill the tank to its absolute limit to prevent thermal expansion. Regularly check the fuel tank cap's seal to avoid evaporation loss or odors. If you frequently drive long distances, planning the spacing between gas stations is crucial to avoid the awkward situation of running out of fuel midway. Overall, understanding the fuel tank size helps optimize fuel economy—for instance, driving more fuel-efficiently can make each refueling more cost-effective.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What is the installation tutorial for the Baojun 530 pedal?

Baojun 530 pedal installation tutorial is: 1. Locate the mounting holes for the bracket on the vehicle chassis; 2. Secure the bracket with screws; 3. After fixing the bracket, loosen the nuts on the back of the pedal; 4. Place the pedal on the bracket, align the studs on the pedal with the holes on the bracket, and adjust the position of the pedal; 5. Once the pedal is adjusted, tighten all the screws. The dimensions of the Baojun 530 are 4690mm in length, 1835mm in width, and 1750mm in height, with a wheelbase of 2750mm, front track of 1554mm, rear track of 1549mm. Its engine has a maximum horsepower of 147Ps, maximum power of 108kW, and maximum torque of 250Nm.
9
1
Share

How to Calculate a Car's Horsepower?

Below is the method to calculate a car's horsepower:1. Formula: Horsepower is calculated from torque, and the formula is: Power (kW) = Torque (N·m) × Speed (rpm) ÷ 9549.2. Engine horsepower: The horsepower of an engine refers to its output capability (work done), i.e., output power.3. Output power: Output power is a very important parameter for measuring car performance, used to evaluate engine performance. Below is some extended information on the topic:1. Parameters: Horsepower, torque, and speed are essentially three interrelated parameters. The need for horsepower in a car is primarily for better handling performance and good acceleration.2. Horsepower size: Horsepower is not the only parameter; there are many other factors that affect car performance.
13
4
Share

What transmission does the Roewe RX5 use?

Roewe RX5 uses a 6MT 7-speed dual-clutch transmission and a 6-speed oil-cooled dual-clutch transmission, equipped with two in-cylinder direct-injection turbocharged engines: 2.0T and 1.5T. The 2.0T engine has a maximum power of 220 horsepower and a peak torque of 350 Nm, while the 1.5T engine has a maximum power of 169 horsepower and a peak torque of 250 Nm. The Roewe RX5 is an internet SUV model under SAIC Roewe, with a body size of 4545mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2700mm. The available body colors include Ruby Red, Solar Blue, Chocolate Brown, Earl Black, Knight Silver, and Elegant White.
1
3
Share

What is the method to troubleshoot the ABS warning light?

ABS warning light troubleshooting methods: 1. Check the fluid level in the brake master cylinder reservoir, if it is too low, add brake fluid to the normal level; 2. Perform fault self-diagnosis, and find the cause of the fault according to the read fault code; 3. If the fault code cannot be read, you can judge the approximate range of the fault according to the pattern of the ABS warning light; 4. Check the power supply circuit of the ABS ECU; 5. Check the grounding condition of the ABS ECU; 6. Check the electric return pump relay and its circuit, if the relay is faulty, it should be replaced, if the power supply circuit of the relay or the control circuit connected to the ECU is faulty, it needs to be repaired; 7. Check the electric return pump motor and its circuit.
6
0
Share

How many points are deducted at once for failing to yield to a school bus as required while driving a motor vehicle?

Failing to yield to a school bus as required while driving a motor vehicle results in a deduction of 6 points at once. Failing to yield to a school bus as required while driving a motor vehicle refers to: 1. Indicator signs: When a school bus stops on the road to pick up or drop off students, it should stop on the right side of the road, turn on the hazard warning flashers, and display the stop indicator sign. 2. Regulations: When a school bus stops on a road with only one motor vehicle lane in the same direction, vehicles behind should stop and wait, and must not overtake. 3. Slow down and pass: When a school bus stops on a road with two or more motor vehicle lanes in the same direction, vehicles behind the school bus and in the adjacent lane should stop and wait, while vehicles in other lanes should slow down and pass.
16
1
Share

What is the approximate length of a sedan in meters?

The length of an ordinary sedan generally ranges between 3800mm and 4300mm. Here are some related details: 1. The width ranges from 1600mm to 1800mm, and the height ranges from 1400mm to 1600mm. 2. Compact cars: Compact cars refer to vehicles with a total weight not exceeding 4.5 tons, seating capacity (including the driver) not exceeding 9 people, or a length under 6 meters. Below is some extended information about tire pressure: 1. Function of low-pressure tires: Low-pressure tires are mainly used for private cars. 2. Function of high-pressure tires: High-pressure tires are primarily used for large freight or passenger vehicles. 3. Tire pressure: The recommended tire pressure for cars driving on highways is 2.5 kilograms per cubic centimeter.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.