What is the fuel tank capacity of the Lamando in liters?

1 Answers
LeHector
07/29/25 10:59pm
The fuel tank capacity of the Lamando is 50 liters. The fuel tank stores the working fluid required for the hydraulic system and also functions to dissipate heat, precipitate impurities, and separate air bubbles from the liquid. Fueling process for the Volkswagen Lamando: Press the left side of the fuel tank to open the fuel tank cap. Unscrew the fuel tank sealing cap counterclockwise. After removing the fuel tank sealing cap, place it on the fuel tank cover. Insert the fuel nozzle into the fuel filler opening. Begin fueling. When the fuel nozzle cuts off for the first time, the tank is full. Continuing to fuel will fill the expansion chamber in the fuel tank. For safety, it is recommended to pull out the fuel nozzle after fueling and wait for 5 seconds at the fuel tank opening to allow any remaining fuel to drip into the tank. Tighten the fuel tank sealing cap until a click is heard. To close, press the left side of the fuel tank cap until a click is heard. Fueling precautions: For the Lamando series, it is recommended to use 95-octane premium unleaded gasoline, as leaded gasoline can easily damage the engine or fuel system, and may also affect the engine's power or even cause the engine to fail to operate.
Was this review help?
5
0
Share
More Forum Discussions

Where is the VIN number located on the Nissan NV200?

The VIN number of the Nissan NV200 is located under the front passenger seat, near the door. There is a 20cm-long opening where you can lift the carpet to see it. The VIN is a set of seventeen letters or numbers that can identify the car's manufacturer, engine, chassis number, and other performance data. Taking the 2018 Nissan NV200 as an example, its body structure is a five-door, seven-seat MPV with the following dimensions: length 4400mm, width 1695mm, height 1847mm, wheelbase 2725mm, front track 1490mm, rear track 1510mm, fuel tank capacity 55 liters, and curb weight 1385kg.
9
2
Share

Where is the cabin air filter located in a Ford Kuga?

Ford Kuga's cabin air filter is located on the left side of the fuse box under the front passenger seat. The cover has screw holes but isn't secured with screws, relying instead on the built-in spring clips on the plastic cover. The functions of the cabin air filter are: 1. Providing fresh air inside the vehicle; 2. Absorbing moisture and harmful substances from the air; 3. Maintaining clean air to prevent bacterial growth and ensure safety and hygiene; 4. Filtering solid particles from the air. Taking the 2019 Ford Kuga as an example, it is a compact SUV with the following dimensions: length 4524mm, width 1838mm, height 1685mm, wheelbase 2690mm, front track 1563mm, rear track 1565mm, fuel tank capacity 60 liters, and curb weight 1592kg.
11
3
Share

How far can the 10th-generation Accord go on a full tank of gas?

The 10th-generation Accord can travel approximately 500km on a full tank of gas. The 10th-generation Accord is a mid-size car with the following dimensions: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, front track 1600mm, rear track 1610mm, fuel tank capacity 56 liters, trunk capacity 574 liters, and curb weight 1495kg. The 10th-generation Accord features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T inline 4-cylinder turbocharged engine producing a maximum horsepower of 194PS, maximum torque of 260Nm, and maximum power of 143kW, paired with a continuously variable transmission (CVT).
20
0
Share

What is the method for removing and installing a car battery?

The method for removing and installing a car battery is: 1. Park the car on a flat surface, turn off the engine, and disconnect the power; 2. Use a screwdriver to remove the battery's protective cover; 3. Disconnect the battery cables, paying special attention to removing the negative terminal first, followed by the positive terminal; 4. Remove the battery's securing bracket; 5. Place the new battery in position and install it in the reverse order, ensuring to connect the positive terminal first, followed by the negative terminal when reattaching the battery cables. The maintenance methods for a car battery are: 1. Avoid overusing the battery; 2. Regularly clean the positive and negative terminals; 3. Periodically check the vent holes on non-maintenance-free battery covers to prevent blockages; 4. Prevent the battery water level from becoming too low; 5. When parking for extended periods, start the vehicle weekly to charge the battery.
17
3
Share

What is the minimum ground clearance of the Toyota IZOA?

The minimum ground clearance of the IZOA is 135mm. More information about ground clearance is as follows: 1. Ground clearance refers to the distance between the ground and the rigid parts at the bottom of the vehicle. 2. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. 3. Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. 4. Vehicles with small ground clearance have a lower center of gravity but poor off-road capability, making them difficult to drive on gravel or dirt roads. 5. Vehicles with large ground clearance have better off-road capability and can also prevent water from entering the exhaust pipe when driving through flooded roads.
12
0
Share

How Long Can Car Window Tint Last?

Car window tint can last for 5 to 10 years. The functions of car window tint are: 1. It can provide heat insulation in summer, saving air conditioning energy; 2. It can reduce heat loss in winter, maintaining the interior temperature; 3. It blocks ultraviolet rays, preventing direct sunlight exposure to interior decorations, thereby extending their lifespan and quality; 4. It reduces glare, ensuring driving safety and comfort. Precautions after applying car window tint include: 1. Avoid rolling down windows within three days; 2. Do not clean the tinted film or activate the defogging heating wires within one week; 3. Do not use fingernails or sharp objects to peel the edges of the film to prevent dirt from entering; 4. Avoid attaching suction cup items to the tinted film for one to two weeks; 5. If bubbles, displacement, or blurred vision occur on the film surface, seek professional assistance promptly to avoid affecting driving safety.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.